Loading ...
Loading ...
Loading ...
19
ENGLISH
TROUBLESHOOTING
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service or repair needed, other than as described in this Owner's Manual, should be performed through
your local LGE service center.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical
shock or personal injury.
WARNING
PROBLEM
Vacuum cleaner will
not run
Poor suction
Vacuum noise is louder
than usual
Musty or unusual smell
• Unplugged at wall outlet
• Hose is not connected to
the body properly
• Full or clogged dust tank
and filters
•
Dust tank improperly installed
• Clogged hose or wand
• Clogged nozzle
• Full or clogged dust tank
and filters
•
Dust tank improperly installed
• Clogged hose or wand
• Clogged nozzle
• Clogged hose or wand
• Clogged nozzle
• Smell as the motor spins
fast around the
surrounding rubber
• The filters of dust
separator with dust is old
or stored for a long time
• Make sure cord is plugged into a
functioning outlet.
• Remove the hose from the body and
reconnect it properly.
• Empty dust tank and clean filters.
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs.
• Empty dust tank and clean filters.
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs.
• Check for clogs.
• New vacuum cleaner smell should
disappear in 1-2 months.
• Empty dust tank and clean filters.
POSSIBLE CAUSE POSSIBLE SOLUTION
Loading ...
Loading ...
Loading ...