Loading ...
Loading ...
Loading ...
10
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for
115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a re
hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
This appliance is intended to be used in household and
similar applications such as sta kitchen areas in shops,
oces and other working environments; farm houses
and by clients in hotels, motels and other residential type
environments; bed and breakfast type environments;
catering and similar non-retail applications.
Shock Hazard:
To reduce the risk of electric shock, do not install the
refrigerator in a wet or damp area.
To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed oor. If
required, adjust the leveling legs to compensate for
unevenness of the oor. The front should be slightly
higher than the rear to aid in door closing. Leveling
legs can be turned easily by tipping the cabinet
slightly. Turn the leveling legs to the left to raise the
unit or to the right to lower it. (See LEVELING AND
DOOR ALIGNMENT.)
Installing on carpeting, soft tile surfaces,
a platform or weakly supported structure is not
recommended.
2.
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F (43°C).
If the temperature around the appliance is too low or
high, cooling ability may be adversely aected.
3.
Select a place where a water supply can be easily
connected for the automatic icemaker.
The water pressure must be from 20-120 psi or
138-827 kPa or 1.4-8.4 kgf/cm². If the refrigerator is
installed in an area with low water pressure (below 20
psi), you can install a booster pump to compensate for
the low pressure.
4.
Too small of a distance from adjacent items may
result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24
inches (61 cm) in front of the refrigerator to open the
doors and at least 2 inches (5.08 cm) between the
back of the refrigerator and the wall.
2" (5.08 cm)
Clean your refrigerator thoroughly and wipe o all
dust that accumulated during shipping.
2.
Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3.
Allow your refrigerator to run for at least two to three
hours before putting food in it. Check the ow of
cold air in the freezer compartment to ensure proper
cooling. Your refrigerator is now ready for use.
Loading ...
Loading ...
Loading ...