DIGITAL CAMERA
X-E2S
Owner’s Manual
Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM X-E2S
digital camera. Be sure that you have read and un-
derstood its contents before using the camera.
■ Product website:
http://fujifilm-x.com/x-e2s/
■ Additional information may be found in online manuals available from:
http://fujifilm-dsc.com/manuals/
EN
BL00004738-200
Before You Begin
First Steps
Basic Photography
and Playback
Basic Movie Recording
and Playback
The Q (Quick Menu) Button
The Fn (Function) Buttons
More on Photography
and Playback
Menus
Connections
Technical Notes
Troubleshooting
Appendix
ii
For Your Safety
For Your Safety
• Read Instructions: All the safety and operating instructions
should be read before the appliance is operated.
• Retain Instructions: The safety and operating instructions
should be retained for future reference.
• Heed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
• Follow Instructions: All operating and use instructions
should be followed.
Installation
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power com-
pany. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fi t into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fi t into a grounding-
type power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety pur-
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these open-
ings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tri-
pod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Antennas
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the anten-
na or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges. Sec-
tion 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground Clamp
Grounding Conductors
(NEC SECTION 810-21)
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Electric Service
Equipment
Ground Clamps
Power Lines: An outside antenna system should not be lo-
cated in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Use
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this
video product through openings as they may touch dangerous
voltage points or short out parts that could result in a fi re or elec-
tric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
IMPORTANT SAFETY INSTRUCTIONS
iii
For Your Safety
Service
Service
Servicing: Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualifi ed service personnel.
Damage Requiring Service: Unplug this video product from
the wall outlet and refer servicing to qualifi ed service per-
sonnel under the following conditions:
• When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the
video product.
• If the video product has been exposed to rain or water.
• If the video product has been dropped or the cabinet has
been damaged.
If the video product does not operate normally follow the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualifi ed technician to restore
the video product to its normal operation.
When the video product exhibits a distinct change in perfor-
mance — this indicates a need for service.
Replacement Parts: When replacement parts are required,
be sure the service technician has used replacement parts
specifi ed by the manufacturer or have the same character-
istics as the original part. Unauthorized substitutions may
result in fi re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
safety notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indi-
cate the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
This icon indicates that death or seri-
ous injury can result if the information
is ignored.
CAUTION
This icon indicates that personal injury
or material damage can result if the in-
formation is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information re-
quires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
WARNING
WARNING
Unplug
from power
socket
If a problem arises, turn the camera o , remove the
battery, and disconnect and unplug the AC power
adapter. Continued use of the camera when it
is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the
camera. If water or foreign objects get inside the
camera, turn the camera off , remove the battery,
and disconnect and unplug the AC power adapt-
er. Continued use of the camera can cause a fi re
or electric shock. Contact your FUJIFILM dealer.
Do not use in
the bathroom
or shower
Do not use the camera in the bathroom or shower.
This can cause a fi re or electric shock.
Do not disas-
semble
Never attempt to change or take apart the camera
(never open the case). Failure to observe this pre-
caution can cause fi re or electric shock.
Do not touch
internal parts
Should the case break open as the result of a fall or
other accident, do not touch the exposed parts. Fail-
ure to observe this precaution could result in elec-
tric shock or in injury from touching the damaged
parts. Remove the battery immediately, taking
care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the con-
nection cord and do not place heavy objects on the
connection cord. These actions could damage the
cord and cause a fi re or electric shock. If the cord
is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traffi c accident.
iv
For Your Safety
WARNING
WARNING
Do not touch any metal parts of the camera during
a thunderstorm. This can cause an electric shock
due to induced current from the lightning dis-
charge.
Do not use the battery except as speci ed. Load the
battery as shown by the indicator.
Do not heat, change or take apart the battery. Do not
drop or subject the battery to impacts. Do not store
the battery with metallic products. Any of these ac-
tions can cause the battery to burst or leak and
cause fi re or injury as a result.
Use only batteries or AC power adapters speci ed for
use with this camera. Do not use voltages other than
the power supply voltage shown. The use of other
power sources can cause a fi re.
If the battery leaks and uid gets in contact with your
eyes, skin or clothing, ush the a ected area with
clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than
those speci ed here. The supplied charger is for
use only with batteries of the type supplied with
the camera. Using the charger to charge conven-
tional batteries or other types of rechargeable
batteries can cause the battery to leak, overheat
or burst.
Using a ash too close to a person’s eyes may cause
visual impairment. Take particular care when pho-
tographing infants and young children.
Do not use in the presence of ammable objects, ex-
plosive gases, or dust.
When carrying the battery, install it in a digital cam-
era or keep it in the hard case. When storing the bat-
tery, keep it in the hard case. When discarding, cover
the battery terminals with insulation tape. Contact
with other metallic objects or batteries could
cause the battery to ignite or burst.
WARNING
WARNING
Keep memory cards, hot shoes, and other small parts
out of the reach of small children. Children may
swallow small parts; keep out of reach of children.
Should a child swallow a small part, seek medical
attention or call emergency.
Keep out of reach of small children. Among the ele-
ments that could cause injury are the strap, which
could become entangled about a child’s neck,
causing strangulation, and the fl ash, which could
cause visual impairment.
Follow the directions of airline and hospital person-
nel. This product generates radio-frequency
emissions that could interfere with navigational
or medical equipment.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil
fumes, steam, humidity or dust. This can cause a
fi re or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in
locations such as a sealed vehicle or in direct sun-
light. This can cause a fi re.
Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and
cause injury.
Do not move the camera while the AC power adapter
is still connected. Do not pull on the connection cord
to disconnect the AC power adapter. This can dam-
age the power cord or cables and cause a fi re or
electric shock.
Do not cover or wrap the camera or the AC power
adapter in a cloth or blanket. This can cause heat
to build up and distort the casing or cause a fi re.
When you are cleaning the camera or you do not plan
to use the camera for an extended period, remove
the battery and disconnect and unplug the AC power
adapter. Failure to do so can cause a fi re or elec-
tric shock.
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged into
the power socket can cause a fi re.
When a memory card is removed, the card could come
out of the slot too quickly. Use your nger to hold it
and gently release the card. Injury could result to
those struck by the ejected card.
Request regular internal testing and cleaning for
your camera. Build-up of dust in your camera
can cause a fi re or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every
two years. Please note that this service is not free
of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
v
For Your Safety
The Battery and Power Supply
Note: Check the type of battery used in your camera and
read the appropriate sections.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or
cause leakage, overheating, fi re, or explosion.
Li-ion Batteries
Li-ion Batteries
Read this section if your camera uses a rechargeable
Li-ion battery.
The battery is not charged at shipment. Charge the battery
before use. Keep the battery in its case when not in use.
■ Notes on the Battery
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when
not in use.
Battery capacity decreases at low temperatures; a depleted
battery may not function at when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary,
or keep the battery in your pocket or other warm place and
insert it in the camera only when shooting. Do not place
the battery in direct contact with hand warmers or other
heating devices.
■ Charging the Battery
Charge the battery in the supplied battery charger. Charg-
ing times will increase at ambient temperatures below
+10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt to
charge the battery at temperatures above 40 °C (+104 °F); at
temperatures below 0 °C (+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged battery. The bat-
tery does not however need to be fully discharged before
charging.
The battery may be warm to the touch immediately after
charging or use. This is normal.
■ Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
end of its service life and should be replaced.
■ Storage
Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
fl at before storing it.
If the camera will not be used for an extended period, re-
move the battery and store it in a dry place with an ambient
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of temperature.
■ Cautions: Handling the Battery
• Do not transport or store with metal objects such as neck-
laces or hairpins.
• Do not expose to fl ame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Dispose of used batteries promptly.
• Do not drop or subject to strong physical shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become warm to the
touch after extended use. This is normal.
■ Disposal
Dispose of used batteries in accord with local regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
Use only FUJIFILM AC power adapters designated for use
with this camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected to the camera.
• Turn the camera off before disconnecting the adapter.
Disconnect the adapter by the plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
Using the Camera
• Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
• Strong sunlight focused through the viewfi nder may dam-
age the panel of electronic viewfi nder (EVF). Do not aim
the electronic viewfi nder at the sun.
Take Test Shots
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profi ts incurred as a result of
product malfunction.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, images recorded us-
ing your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Handling
Handling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
vi
For Your Safety
Liquid Crystal
Liquid Crystal
In the event that the display is damaged, care should be
taken to avoid contact with liquid crystal. Take the urgent
action indicated should any of the following situations arise:
• If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
• If liquid crystal enters your eyes, fl ush the aff ected eye with
clean water for at least 15 minutes and then seek medical
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Although the display is manufactured using extremely high-
precision technology, it may contain pixels that are always lit
or that do not light. This is not a malfunction, and images
recorded with the product are unaff ected.
Trademark Information
Trademark Information
Digital Split Image is a trademark or registered trademark
of FUJIFILM Corporation. xD-Picture Card and E are
trademarks of FUJIFILM Corporation. The typefaces included
herein are solely developed by DynaComware Taiwan Inc.
Macintosh, QuickTime, and Mac OS are trademarks of Apple
Inc. in the U.S.A. and other countries. The Windows logo is a
trademark of the Microsoft group of companies. Wi-Fi® and
Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi
Alliance. Adobe and Adobe Reader are either trademarks or
registered trademarks of Adobe Systems Incorporated in the
U.S.A. and/or other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo is a trademark.
YouTube is a trademark of Google Inc. All other trade names
mentioned in this manual are the trademarks or registered
trademarks of their respective owners.
Electrical Interference
Electrical Interference
This camera may interfere with hospital or aviation equip-
ment. Consult with hospital or airline staff before using the
camera in a hospital or on an aircraft.
Color Television Systems
Color Television Systems
NTSC (National Television System Committee) is a color tele-
vision telecasting specifi cation adopted mainly in the U.S.A.,
Canada, and Japan. PAL (Phase Alternation by Line) is a color
television system adopted mainly in European countries and
China.
Exif Print (Exif Version 2.3)
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera fi le format in
which information stored with photographs is used for opti-
mal color reproduction during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed soft-
ware without the permission of the applicable governing
bodies is prohibited.
NOTICES
To prevent re or shock hazard, do not expose the unit
to rain or moisture.
Please read the “Safety Notes” and make sure you un-
derstand them before using the camera.
Perchlorate Material—special handling may apply. See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
vii
For Your Safety
For Customers in the U. S. A.
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 7736B-02000002
Contains FCC ID : W2Z-02000002
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)this device must accept any interference received, includ-
ing interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: Any changes or modifi cations not expressly ap-
proved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in con-
junction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the govern-
ment’s requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit
of measurement known as the Specifi c Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certi-
fi ed power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifi lm-specifi ed ferrite-
core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for informa-
tion on how to recycle this battery.
For Customers in Canada
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Cana-
dian ICES-003.
Industry Canada statement: This device complies with RSS-
210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This device and its antenna(s) must not be co-located or op-
erating in conjunction with any other antenna or transmit-
ter, except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The available scientifi c
evidence does not show that any health problems are as-
sociated with using low power wireless devices. There is no
proof, however, that these low power wireless devices are
absolutely safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while
being used. Whereas high levels of RF can produce health
eff ects (by heating tissue), exposure of low-level RF that does
not produce heating eff ects causes no known adverse health
eff ects. Many studies of low-level RF exposures have not
found any biological eff ects. Some studies have suggested
that some biological eff ects might occur, but such fi ndings
have not been confi rmed by additional research. X-E2S has
been tested and found to comply with IC radiation exposure
limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules.
Disposal of Electrical and Electronic Equipment in Private Households
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and
Liechtenstein: This symbol on the product, or in
the manual and in the warranty, and/or on its
packaging indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the en-
vironment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators in-
dicates that those batteries shall not be treated
as household waste.
If your equipment contains easy removable batteries or
accumulators please dispose these separately according to
your local requirements.
The recycling of materials will help to conserve natural resourc-
es. For more detailed information about recycling this product,
please contact your local city offi ce, your household waste
disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local au-
thorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates
that they are to be disposed of separately.
viii
For Your Safety
Be sure to read these notes before use
Safety Notes
Thank you for your purchase of this product. For repair, inspection, and internal testing, con-
tact your FUJIFILM dealer.
• Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s
Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of the injury or
damage that can result if the information indicated by the icon is ignored and the product
is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury can result if the informa-
tion is ignored.
CAUTION
This icon indicates that personal injury or material damage can result if
the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be
observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited
(“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed
(“Required”).
WARNING
WARNING
Do not use in
the bathroom or
shower
Do not immerse in or expose to water. Failure to observe this precaution can cause
a fi re or electric shock.
Do not disas-
semble
Do not disassemble (do not open the case). Failure to observe this precaution can
cause fi re, electric shock, or injury due to product malfunction.
Do not touch
internal parts
Should the case break open as the result of a fall or other accident, do not touch the
exposed parts. Failure to observe this precaution could result in electric shock
or in injury from touching the damaged parts. Remove the camera battery
immediately, taking care to avoid injury or electric shock, and take the product
to the point of purchase for consultation.
WARNING
WARNING
Do not place on unstable surfaces. The product may fall, causing injury.
Do not view the sun through the lens or camera view nders. Failure to observe this
precaution can cause permanent visual impairment.
CAUTION
CAUTION
Do not use or store in locations that are exposed to steam, or smoke or are very humid
or extremely dusty. Failure to observe this precaution can cause fi re or electric
shock.
Do not leave in direct sunlight or in locations subject to very high temperatures, such
as in a closed vehicle on a sunny day. Failure to observe this precaution can cause
fi r e .
Keep out of the reach of small children. This product could cause injury in the
hands of a child.
Do not handle with wet hands. Failure to observe this precaution can cause
electric shock.
Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into
the camera when the sun is in or close to the frame can cause fi re or burns.
When the product is not in use, replace the lens caps and store out of direct sunlight.
Sunlight focused by the lens can cause fi re or burns.
Do not carry the camera or lens while they are attached to a tripod. The product can
fall or strike other objects, causing injury.
ix
For Your Safety
European Union regulatory notice
European Union regulatory notice
This product complies with the following EU Directives:
• RoHS Directive 2011/65/EU
• R & TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
FUJIFILM Corporation for this product or product family.
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g.
Bluetooth).
Regarding the Declaration of Conformity, visit http://www.fujifilm.com/products/digital_
cameras/x/fujifilm_x_e2s/pdf/index/fujifilm_x_e2s_cod.pdf.
IMPORTANT: Read the following notices before using the camera’s built-in wireless
transmitter.
Q This product, which contains encryption function developed in the United States, is con-
trolled by the United States Export Administration Regulations and may not be exported
or re-exported to any country to which the United States embargoes goods.
• Use only as part of a wireless network. FUJIFILM does not accept liability for damages result-
ing from unauthorized use. Do not use in applications requiring a high degree of reliability,
for example in medical devices or other systems that may directly or indirectly impact
human life. When using the device in computer and other systems that demand a greater
degree of reliability than wireless networks, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This device conforms to regulations
governing wireless network devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not accept liability for prob-
lems arising from use in other jurisdictions.
• Wireless data (images) may be intercepted by third parties. The security of data transmitted
over wireless networks is not guaranteed.
• Do not use the device in locations subject to magnetic elds, static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in other locations subject
to magnetic fi elds, static electricity, or radio interference that may prevent reception of
wireless signals. Mutual interference may occur when the transmitter is used in the vicinity
of other wireless devices operating in the 2.4GHz band.
• The wireless transmitter operates in the 2.4GHz band using DSSS and OFDM modulation.
Wireless Network Devices: Cautions
• This device operates on the same frequency as commercial, educational, and medical devices and
wireless transmitters. It also operates on the same frequency as licensed transmitters and
special unlicensed low-voltage transmitters used in RFID tracking systems for assembly
lines and in other similar applications.
• To prevent interference with the above devices, observe the following precautions. Confi rm that
the RFID transmitter is not in operation before using this device. Should you observe that
the device causes interference in licensed transmitters used for RFID tracking, immedi-
ately stop using the aff ected frequency or move the device to another location. If you
notice that this device causes interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
2.4DS/OF4
This sticker indicates that this device operates in the 2.4GHz
band using DSSS and OFDM modulation and may cause inter-
ference at distances of up to 40m.
x
About This Manual
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information
on speci c topics, consult the sources below.
Table of Contents
Table of Contents
.................................................
.................................................
P
P
xii
xii
Troubleshooting
Troubleshooting
................................................
................................................
P
P
135
135
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
Having a speci c problem with the camera?
Find the answer here.
Warning Messages and Displays
Warning Messages and Displays
.........................
.........................
P
P
140
140
Restrictions on Camera Settings
Restrictions on Camera Settings
..........................
..........................
P
P
151
151
Find out what’s behind that ashing icon or error
message in the display.
See page 151 for restrictions on the options
available in each shooting mode.
Memory Cards
Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 20), referred to in this manual as “memory
cards.”
xi
Product Care
Product Care
Camera body: For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body
after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform
the leather on the camera body. Any liquid on the camera should be removed immediately with a
soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then
gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece
of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning uid has been applied. To
prevent dust entering the camera, replace the body cap when no lens is in place.
Image sensor: Dust can be removed from the image sensor using the V SENSOR CLEANING option in
the setup menu (P 110).
Interchangeable lenses: Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remain-
ing stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a
small amount of lens-cleaning uid has been applied. Replace the front and rear caps when the lens
is not use.
xii
Table of Contents
Table of Contents
For Your Safety ..................................................................................... ii
IMPORTANT SAFETY INSTRUCTIONS .........................................ii
Safety Notes .......................................................................................iii
NOTICES ...............................................................................................vi
Safety Notes .....................................................................................viii
About This Manual .............................................................................x
Product Care ........................................................................................xi
Before You Begin
Before You Begin
Symbols and Conventions ..............................................................1
Supplied Accessories ........................................................................1
Parts of the Camera ...........................................................................2
The Selector ........................................................................................5
The Command Dial ..........................................................................5
The AUTO (Auto Mode) Button ...................................................6
Camera Displays ................................................................................7
Shooting: View nder/LCD Monitor ........................................7
Playback .............................................................................................9
Lenses ................................................................................................... 10
Parts of the Lens ............................................................................. 10
Removing the Caps ....................................................................... 10
Attaching the Hood ...................................................................... 10
Lenses with Aperture Rings ....................................................... 11
Lenses with No Aperture Rings ................................................ 11
Lenses with O.I.S. Switches ......................................................... 12
Manual Focus Lenses .................................................................... 12
First Steps
First Steps
Attaching the Strap ........................................................................ 13
Attaching a Lens .............................................................................. 15
Charging the Battery ..................................................................... 16
Inserting the Battery and a Memory Card ........................... 17
Compatible Memory Cards ..................................................... 20
Turning the Camera on and O ................................................ 21
Basic Setup ......................................................................................... 22
Changing Basic Settings ............................................................. 23
Choosing a Display ......................................................................... 24
The View nder Display ................................................................ 25
Focusing the View nder ............................................................. 25
Adjusting Display Brightness .................................................... 25
The DISP/BACK Button ....................................................................... 26
View nder: Shooting ................................................................. 26
LCD Monitor: Shooting ............................................................. 26
Customizing the Standard Display ...................................... 27
View nder/LCD Monitor: Playback ...................................... 28
xiii
Table of Contents
Basic Photography and Playback
Basic Photography and Playback
Taking Photographs ....................................................................... 29
Viewing Pictures .............................................................................. 31
Viewing Pictures Full Frame ....................................................... 31
Viewing Photo Information ....................................................... 32
Playback Zoom ............................................................................... 33
Multi-Frame Playback ................................................................... 34
Deleting Pictures ............................................................................. 35
Using the Flash ................................................................................. 36
Basic Movie Recording and Playback
Basic Movie Recording and Playback
Recording Movies ............................................................................ 38
Using an External Microphone ................................................. 39
Viewing Movies ................................................................................ 40
The Q (Quick Menu) Button
The Q (Quick Menu) Button
Using the Q Button ......................................................................... 41
The Quick Menu Display ............................................................. 41
Viewing and Changing Settings .............................................. 42
Editing the Quick Menu .............................................................. 43
The Fn (Function) Buttons
The Fn (Function) Buttons
Using the Function Buttons ........................................................ 44
Assigning Roles to the Function Buttons ............................. 45
More on Photography and Playback
More on Photography and Playback
Mode Selection ................................................................................. 46
P, S, A, and M Modes ..................................................................... 46
Program AE (P) ............................................................................. 47
Shutter-Priority AE (S)................................................................ 48
Aperture-Priority AE (A) ............................................................ 49
Manual Exposure (M) ................................................................. 50
Auto Modes ...................................................................................... 51
SADVANCED SR AUTO ......................................................... 52
Long Time-Exposures (T/B) ......................................................... 53
Time (T) .............................................................................................. 53
Bulb (B) ............................................................................................... 53
Using a Remote Release .............................................................. 54
Exposure Compensation .............................................................. 55
Focus/Exposure Lock ..................................................................... 56
Metering .............................................................................................. 58
Film Simulation ................................................................................ 59
The DRIVE Button ............................................................................ 60
Continuous Shooting (Burst Mode) ........................................ 61
Bracketing ......................................................................................... 62
Panoramas ........................................................................................ 63
Viewing Panoramas ................................................................... 65
Multiple Exposures ........................................................................ 66
Advanced Filter ............................................................................... 67
xiv
Table of Contents
Focus Mode ........................................................................................
68
The Focus Indicator .................................................................... 69
MF Assist ......................................................................................... 70
Autofocus Options (AF Mode) .................................................. 71
Focus-Point Selection ................................................................... 72
Single Point AF ............................................................................. 72
Zone AF ........................................................................................... 73
Tracking (Focus Mode C Only) ................................................ 74
Sensitivity ........................................................................................... 75
AUTO ................................................................................................ 76
Recording Pictures in RAW Format ......................................... 77
Creating JPEG Copies of RAW Pictures .................................. 78
Using the Self-Timer ....................................................................... 79
Interval Timer Photography ....................................................... 81
White Balance ................................................................................... 82
Saving Settings ................................................................................. 84
Using a Mount Adapter ................................................................ 85
Mount Adapter Settings.............................................................. 85
Choosing a Focal Length ......................................................... 85
Distortion Correction ................................................................ 85
Color Shading Correction ........................................................ 86
Peripheral Illumination Correction ...................................... 86
PhotoBook Assist ............................................................................. 87
Creating a PhotoBook .................................................................. 87
Viewing Photobooks .................................................................... 88
Editing and Deleting Photobooks ........................................... 88
Image Search ..................................................................................... 89
Menus
Menus
Using the Menus: Shooting Mode ........................................... 90
Shooting Menu Options (Photographs) ............................... 90
d ADVANCED FILTER................................................................ 90
A SCENE POSITION ................................................................... 90
G AUTOFOCUS SETTING ........................................................ 90
N ISO .............................................................................................. 92
O IMAGE SIZE .............................................................................. 93
T IMAGE QUALITY .................................................................... 93
U DYNAMIC RANGE.................................................................. 93
P FILM SIMULATION ................................................................ 93
B SELF-TIMER .............................................................................. 93
o INTERVAL TIMER SHOOTING ............................................ 94
D WHITE BALANCE ................................................................... 94
f COLOR ....................................................................................... 94
q SHARPNESS ............................................................................. 94
r HIGHLIGHT TONE .................................................................. 94
s SHADOW TONE ..................................................................... 94
h NOISE REDUCTION ............................................................... 94
K LONG EXPOSURE NR ........................................................... 94
j LENS MODULATION OPTIMIZER ..................................... 94
u SELECT CUSTOM SETTING ................................................ 94
K EDIT/SAVE CUSTOM SETTING .......................................... 94
l MOUNT ADAPTOR SETTING ............................................. 95
m SHOOT WITHOUT LENS ...................................................... 95
c MF ASSIST ................................................................................ 95
v AE/AF-LOCK MODE .............................................................. 95
d AF-LOCK BUTTON ................................................................. 95
C PHOTOMETRY ........................................................................ 95
v INTERLOCK SPOT AE & FOCUS AREA ............................ 95
p FLASH SET-UP ........................................................................ 96
W MOVIE SET-UP ........................................................................ 96
xv
Table of Contents
X
FILM SIMULATION BKT ....................................................... 97
L IS MODE ................................................................................... 97
r WIRELESS COMMUNICATION ........................................... 97
e APERTURE SETTING ............................................................. 97
x SHUTTER TYPE ....................................................................... 98
Using the Menus: Playback Mode............................................ 99
Playback Menu Options .............................................................. 99
r WIRELESS COMMUNICATION ........................................... 99
j RAW CONVERSION ............................................................... 99
A ERASE ........................................................................................ 99
G CROP ........................................................................................100
e RESIZE .....................................................................................100
D PROTECT ................................................................................101
C IMAGE ROTATE ..................................................................... 101
B RED EYE REMOVAL ............................................................. 102
I SLIDE SHOW .........................................................................102
m PHOTOBOOK ASSIST ......................................................... 103
j MARK FOR UPLOAD TO ....................................................103
b IMAGE SEARCH .................................................................... 103
s PC AUTO SAVE .....................................................................104
K PRINT ORDER (DPOF) ........................................................ 104
V instax PRINTER PRINT ........................................................104
J DISP ASPECT .........................................................................104
The Setup Menu ............................................................................. 105
Using the Setup Menu ............................................................... 105
Setup Menu Options ..................................................................106
F DATE/TIME .............................................................................106
N TIME DIFFERENCE ............................................................... 106
Q a .............................................................................. 106
R RESET .......................................................................................106
o SOUND & FLASH ................................................................. 106
b SOUND SET-UP .................................................................... 107
A SCREEN SET-UP ....................................................................107
h BUTTON/DIAL SETTING....................................................109
I FOCUS RING ..........................................................................109
Z POWER
MANAGEMENT ....................................................109
V SENSOR CLEANING ............................................................ 110
t SAVE DATA SET-UP .............................................................110
J COLOR SPACE .......................................................................111
u EVF/LCD SETTING ............................................................... 111
r CONNECTION SETTING .................................................... 112
K FORMAT ..................................................................................113
Factory Defaults ............................................................................. 114
xvi
Table of Contents
Connections
Connections
Wireless Transfer ............................................................................ 117
Wireless Connections: Smartphones ...................................117
Wireless Connections: Computers ........................................ 117
Viewing Pictures on a Computer ............................................118
Windows .......................................................................................... 118
Macintosh .......................................................................................118
Connecting the Camera ............................................................ 119
Printing Pictures via USB ...........................................................121
Connecting the Camera ............................................................ 121
Printing Selected Pictures ........................................................121
Printing the DPOF Print Order ................................................122
Creating a DPOF Print Order....................................................123
WITH DATE s/ WITHOUT DATE .......................................... 124
RESET ALL .....................................................................................125
instax SHARE Printers .................................................................. 126
Establishing a Connection........................................................126
Printing Pictures ...........................................................................127
Viewing Pictures on TV ...............................................................128
Technical Notes
Technical Notes
Optional Accessories....................................................................129
Accessories from FUJIFILM .......................................................129
Connecting the Camera to Other Devices ......................... 132
Caring for the Camera ................................................................. 133
Storage and Use ...........................................................................133
Traveling .......................................................................................... 133
Cleaning the Image Sensor .......................................................134
Troubleshooting
Troubleshooting
Problems and Solutions .............................................................135
Warning Messages and Displays ............................................ 140
Appendix
Appendix
Memory Card Capacity ...............................................................143
Links .....................................................................................................144
FUJIFILM X-E2S Product Information ................................... 144
Firmware Updates .......................................................................144
Free FUJIFILM Apps .....................................................................144
Speci cations ..................................................................................145
Restrictions on Camera Settings ............................................ 151
1
Before You Begin
Before You Begin
Before You Begin
Symbols and Conventions
Symbols and Conventions
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
P Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may
be simpli ed for explanatory purposes.
Supplied Accessories
Supplied Accessories
The following items are included with the camera:
NP-W126 rechargeable battery BC-W126 battery charger Body cap
• Protective covers (× 2)
• Shoulder strap
• Owner’s Manual (this manual)
Clip attaching tool Metal strap clips (× 2)
R If you purchased a lens kit, check that a lens is included.
2
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
3
Before You Begin
Parts of the Camera
A
A
Shutter button ................................................ 30
B
B
Exposure compensation dial ........................... 55
C
C
Shutter speed dial ..........................47, 48, 49, 50
D
D
Hot shoe ...................................................37, 132
E
E
Flash ............................................................... 36
F
F
Strap eyelet ..................................................... 13
G
G
Connector cover ................. 39, 54, 119, 121, 128
H
H
Focus mode selector ...................................29, 68
I
I
Lens signal contacts ........................................ 10
J
J
Lens release button ......................................... 15
K
K
Microphone ..................................................... 38
L
L
AF-assist illuminator ....................................... 92
Self-timer lamp ............................................... 79
M
M
ON/OFF switch ............................................... 21
N
N
Function button (Fn7) .................................... 44
Movie-record button ....................................... 38
Wi-Fi button (playback mode) ...................... 117
O
O
Battery chamber ............................................. 17
P
P
Memory card slot ............................................ 18
Q
Q
Battery latch ................................................... 17
R
R
Electronic view nder (EVF) ....................7, 24, 26
S
S
LCD monitor ...........................................7, 24, 26
T
T
Command dial ................................................... 5
U
U
Speaker ........................................................... 40
V
V
Cable channel cover for DC coupler
W
W
Battery-chamber cover ................................... 17
X
X
Battery-chamber cover latch ........................... 17
Y
Y
Tripod mount
Z
Z
Micro USB connector ........................54, 119, 121
a
a
HDMI mini connector .................................... 128
b
b
Microphone/remote release connector ......39, 54
c
c
Body cap ......................................................... 15
d
d
Diopter adjustment control ............................. 25
e
e
Eye sensor ....................................................... 24
f
f
N ( ash pop-up) button ................................. 36
g
g
Q (quick menu) button
*
.................................. 41
Quick menu edit/custom settings button
(press and hold)
*
........................................43, 84
RAW conversion button (playback mode) ....... 78
h
h
Indicator lamp ................................................... 4
i
i
AF-L (focus lock) button...............56, 68, 95, 109
j
j
AE-L (exposure lock) button.............. 56, 95, 109
k
k
MENU/OK button ..............................90, 99, 105
X (control lock) button (press and hold) ......... 4
l
l
Function button (Fn3—Fn6)......................... 44
Selector ............................................................. 5
m
m
DISP (display)/BACK button ........................... 26
n
n
Function button (Fn2) .................................... 44
AUTO (auto mode) button ...........................6, 51
b (delete) button (playback mode) ............... 35
o
o
Function button (Fn1) .................................... 44
AE (autoexposure) button ............................... 58
n (playback zoom out) button .................33, 34
p
p
DRIVE button .................... 60, 61, 62, 63, 66, 67
k (playback zoom in) button ...................33, 34
q
q
a (playback) button ..................................... 31
* In shooting mode, press and release to display quick menu or press and hold to display quick menu edit options. When quick
menu is displayed, press and hold to edit custom settings.
4
Parts of the Camera
The Indicator Lamp
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green
Glows green Focus locked.
Blinks green
Blinks green Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange
Blinks orange Flash charging; ash will not re when picture is taken.
Blinks red
Blinks red Lens or memory error.
Indicator lamp
R Warnings may also appear in the display (P 140).
R The indicator lamp remains o while the view nder is in use (P 24).
Control Lock
Control Lock
To prevent accidental operation of the selector and AE-L and AF-L buttons during shooting, press MENU/OK until
X is displayed. The controls can be unlocked by pressing MENU/OK until X is no longer displayed.
5
Before You Begin
Parts of the Camera
The Selector
The Selector
Press the selector up (
q
), right
(
e
), down (
r
), or left (
w
) to
highlight items. The up, left,
right, and down buttons also
double as the Fn3 (AF mode;
P 71), Fn4 ( lm simulation;
P 59), Fn5 ( ash mode; P 36),
and Fn6 (focus-frame selection; P 72) buttons, re-
spectively (P 44).
The Command Dial
The Command Dial
Rotate the command dial to select op-
tions in the quick menu display (P 42),
view pictures (P 31), adjust the size of the focus
area (P 72), or choose a shutter speed (P 11, 46,
48, 50, 53) or combination of shutter speed and
aperture (program shift, P 47).
Press the center of the command dial to
zoom in on the active focus area during
shooting (P 69) or playback (P 32), or press and
hold the center of the command dial to choose a
manual focus assist option (P 70).
6
Parts of the Camera
The AUTO (Auto Mode) Button
The AUTO (Auto Mode) Button
Press a function button (by default, Fn2/AUTO) button to select S ADVANCED SR AUTO mode or an
auto mode in which you can choose the scene. Press the button again to exit auto mode.
R At default settings, AUTO MODE ON/OFF is assigned to the AUTO (Fn2) button, but it can be assigned to other
function buttons as desired (P 45).
R The options available vary with the shooting mode and shooting conditions. See “Restrictions on Camera Settings”
(P 151) for more information.
Q AUTO is displayed in red when auto mode
is selected.
7
Before You Begin
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and playback. In the description
that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed
vary with camera settings. Note that the LCD monitor and electronic view nder have di erent aspect
ratios.
■ Shooting: View nder/LCD Monitor
P
4000 5.6 400
12/31/2050 10:00 AM
12/31/2050 10:00 AM
8
Parts of the Camera
A
Focus check .......................................................69
B
Depth-of- eld preview .....................................49
C
Location data download status ............... 112, 117
D
Movie mode ......................................................96
E
Time remaining ................................................38
F
Number of available frames * .........................143
G
Image quality and size ......................................93
H
Date and time ............................................. 22, 23
I
Focus frame ......................................................56
J
White balance ...................................................82
K
Film simulation .................................................59
L
Dynamic range .................................................93
M
Focus warning .................................... 4, 137, 140
N
Temperature warning .....................................142
O
Control lock .........................................................4
P
Sound and ash indicator ...............................106
Q
Histogram .........................................................28
R
Distance indicator .............................................68
S
Battery level .....................................................21
T
Sensitivity .........................................................75
U
Exposure compensation/exposure indicator
................................................................... 50, 55
V
Aperture ............................................... 47, 49, 50
W
Shutter speed ....................................... 47, 48, 50
X
AE lock indicator ...............................................56
Y
Metering ...........................................................58
Z
Shooting mode ........................................... 46, 51
a
Focus indicator ..................................................69
b
Manual focus indicator .....................................69
c
Focus mode ......................................................68
d
AF+MF indicator ..............................................91
e
Shutter type......................................................98
f
Continuous mode .............................................61
g
Self-timer indicator ..........................................79
h
Microphone/remote release ................. 39, 54, 96
i
Flash mode .......................................................36
Flash compensation ..........................................96
j
Virtual horizon ..................................................28
* Shows “9999” if there is space for over 9999 frames.
Control Lock
Control Lock
X
Pressing a locked control (
Pressing a locked control (
P
P
4) displays a
4) displays a
X
X
icon.
icon.
9
Before You Begin
Parts of the Camera
■ Playback
100-0001
100-0001
12/31/2050 10:00 AM
12/31/2050 10:00 AM
1/4000
1/4000
5.6
5.6
400
400
A
Date and time ............................................. 22, 23
B
Intelligent face detection indicator ...................91
C
Red-eye removal indicator ........................ 96, 102
D
Advanced lter .................................................67
E
Location data ..................................................112
F
Protected image .............................................101
G
Sound and ash indicator ...............................106
H
Frame number ................................................ 110
I
Gift image .........................................................31
J
Photobook assist indicator ................................87
K
DPOF print indicator .......................................123
L
Battery level .....................................................21
M
Image quality and size ......................................93
N
Film simulation .................................................59
O
Dynamic range .................................................93
P
White balance ...................................................82
Q
Sensitivity .........................................................75
R
Exposure compensation ....................................55
S
Aperture ............................................... 47, 49, 50
T
Shutter speed ....................................... 47, 48, 50
U
Playback mode indicator...................................31
V
Movie icon ........................................................40
W
Mark for upload to ..........................................103
X
Rating ...............................................................31
10
Parts of the Lens
Parts of the Lens
A
A
Lens hood
B
B
Mounting marks
C
C
Focus ring
D
D
Zoom ring
E
E
Aperture ring
F
F
O.I.S. switch
G
G
Aperture mode switch
H
H
Lens signal contacts
I
I
Front lens cap
J
J
Rear lens cap
Removing the Caps
Removing the Caps
Remove the caps as shown.
Q Lens caps may di er from those shown.
Attaching the Hood
Attaching the Hood
When attached, lens hoods reduce glare and pro-
tect the front lens element.
Lenses
Lenses
The camera can be used with lenses for the FUJIFILM X-mount.
11
Before You Begin
Lenses
Lenses with Aperture Rings
Lenses with Aperture Rings
At settings other than A, you
can adjust aperture by rotating
the lens aperture ring (expo-
sure modes A and M).
Aperture ring
A161185.64
2.8
A161185.64
The Aperture Mode Switch
The Aperture Mode Switch
If the lens has an aperture mode switch, aperture can
be adjusted manually by sliding the switch to Z and
rotating the aperture ring.
Aperture ring
Aperture mode switch
Lenses with No Aperture Rings
Lenses with No Aperture Rings
The method used to adjust aperture can be se-
lected using the e APERTURE SETTING option
(P 97) in the shooting menu. When an option
other than AUTO is selected, aperture can be ad-
justed using the command dial.
R Selecting S.S for h BUTTON/DIAL SETTING>
COMMAND DIAL SETTING (P 109) allows the
command dial to be used to choose the shut-
ter speed (P 46, 48, 50, 98), the exposure time for
long time-exposures when the shutter-speed dial
is rotated to T (time) (P 53), or, in program AE mode
(mode P), di erent combinations of shutter speed
and aperture (program shift, P 47).
R Assigning COMMAND DIAL SETTING to a func-
tion button makes it easy to switch between shutter
speed and aperture (P 45).
12
Lenses
Lenses with O.I.S. Switches
Lenses with O.I.S. Switches
If the lens supports optical image stabilization
(O.I.S.), the image stabilization mode can be cho-
sen in the camera menus. To activate image sta-
bilization, slide the switch to ON.
O.I.S. switch
Manual Focus Lenses
Manual Focus Lenses
Slide the focus ring to the front for
autofocus.
For manual focus, slide the focus ring
to the back and rotate it while check-
ing the results in the camera display.
The focus distance and depth-of- eld
indicators can be used to assist manual
focus. Note that manual focus may not
be available in all shooting modes.
The Depth-of-Field Indicator
The Depth-of-Field Indicator
The depth-of- eld indicator shows the approximate
depth of eld (the distance in front of and behind the
focus point that appears to be in focus).
Distance
indicator
Q The camera does not display the focus distance when
the lens is in manual focus mode.
13
First Steps
First Steps
First Steps
Attaching the Strap
Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
1
Open a strap clip.
Use the clip attaching tool to open a strap clip,
making sure that the tool and clip are in the
orientations shown.
Q Keep the tool in a safe place. You will need it to
open the strap clips when removing the strap.
2
Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening. Re-
move the tool, using the other hand to keep
the clip in place.
3
Pass the clip through the eyelet.
Rotate the clip fully through
the eyelet until it clicks
closed.
4
Attach a protective cover.
Place a protective cover over the eyelet as
shown, with the black side of the cover toward
the camera. Repeat Steps 1–4 for the second
eyelet.
14
Attaching the Strap
5
Insert the strap.
Insert the strap through a protective cover
and strap clip.
6
Fasten the strap.
Fasten the strap as shown. Repeat Steps 5–6
for the second eyelet.
Q To avoid dropping the camera, be sure the strap is
correctly secured.
15
First Steps
Attaching a Lens
Attaching a Lens
Lenses attach as described below.
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
1
Remove the body and rear caps.
Remove the body cap from the camera and
the rear cap from the lens.
Q Do not touch the camera’s internal parts.
2
Attach the lens.
Place the lens on mount, keeping the marks
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
Q Do not press the lens release button while at-
taching the lens.
Removing Lenses
Removing Lenses
To remove the lens, turn the
camera o , then press the lens
release button and rotate the
lens as shown.
Lens release button
Q To prevent dust accumulating on the lens or inside the
camera, replace the lens caps and camera body cap
when the lens is not attached.
Lenses and Other Optional Accessories
Lenses and Other Optional Accessories
The camera can be used with lenses for the FUJIFILM
X-mount and the other accessories listed from page
129.
16
Charging the Battery
Charging the Battery
The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger.
1
Place the battery in the charger.
Place the battery in the supplied battery char-
ger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
R The supplied AC cord is for use exclusively with
the supplied battery charger. Do not use the
supplied charger with other cords or the sup-
plied cord with other devices.
2
Plug the charger in.
Plug the charger into an indoor power outlet.
The charging indicator will light.
The Charging Indicator
The Charging Indicator
The charging indicator shows battery charge sta-
tus as follows:
Charging
Charging
indicator
indicator
Battery status
Battery status
Action
Action
O
O
Battery not
Battery not
inserted.
inserted.
Insert the battery.
Insert the battery.
Battery fully
Battery fully
charged.
charged.
Remove the battery.
Remove the battery.
On
On
Battery charging.
Battery charging.
—
—
Blinks
Blinks
Battery fault.
Battery fault.
Unplug the charger
Unplug the charger
and remove the
and remove the
battery.
battery.
3
Charge the battery.
Remove the battery when charging is com-
plete. See the speci cations (P 149) for charg-
ing times (note that charging times increase
at low temperatures).
Q Unplug the charger when it is not in use.
17
First Steps
Inserting the Battery and a Memory Card
Inserting the Battery and a Memory Card
The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC
memory cards (sold separately). After charging the battery, insert the battery and memory card as
described below.
1
Open the battery-chamber cover.
Slide the battery-chamber latch as shown and
open the battery-chamber cover.
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precau-
tion could damage image les or memory cards.
Q Do not use excessive force when handling the
battery-chamber cover.
2
Insert the battery.
Using the battery to keep the battery latch
pressed to one side, insert the battery con-
tacts rst in the direction shown by the arrow.
Con rm that the battery is securely latched.
Battery latch
Arrow
Q Insert the battery in the correct orientation. Do
not use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation.
18
Inserting the Battery and a Memory Card
3
Insert the memory card.
Holding the memory card in the orientation
shown, slide it in until it clicks into place at the
back of the slot.
Click
Q Be sure card is in the correct orientation; do not
insert at an angle or use force.
Q SD/SDHC/SDXC memo-
ry cards can be locked,
making it impossible to
format the card or to
record or delete images.
Before inserting a memory card, slide the write-
protect switch to the unlocked position.
4
Close the battery-chamber cover.
Write-protect switch
19
First Steps
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera o and open the battery-chamber cover.
To remove the battery, press
the battery latch to the side,
and slide the battery out of
the camera as shown.
Battery latch
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could be
ejected too quickly. Use your
nger to hold it and gently release the card.
Q
Q
Batteries
Batteries
• Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Do not a x stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
• Do not short the battery terminals. The battery could
overheat.
• Read the cautions in “The Battery and Power Supply”
(
P v).
• Use only battery chargers designated for use with the
battery. Failure to observe this precaution could re-
sult in product malfunction.
• Do not remove the labels from the battery or attempt
to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
20
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-
era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_
cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q
Q
Memory Cards
Memory Cards
• Do not turn the camera o or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
• Format memory cards before rst use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 113.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card
may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do
not forcibly remove the card.
• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or
better for movies and burst photography.
• Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete
this folder or use a computer or other device to edit, delete, or rename image les. Always use the camera to
delete pictures; before editing or renaming les, copy them to a computer and edit or rename the copies, not
the originals. Renaming the les on the camera can cause problems during playback.
21
First Steps
Turning the Camera on and O
Turning the Camera on and O
Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn
the camera o .
R Press the a button to start playback. Press the shutter button halfway to
return to shooting mode.
R The camera will turn o automatically if no operations are performed for the
length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 109). To reactivate the camera
after it has turned o automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then
back to ON.
R For information on startup options, see page 109.
Q Fingerprints and other marks on the lens or view nder can a ect pictures or the view through the view nder.
Keep the lens and view nder clean.
Battery Level
Battery Level
After turning the camera on, check the battery level in the display.
Indicator
Indicator
Description
Description
O (white)
Battery partially discharged.
M (white)
Battery about two-thirds charged.
K (white)
Battery about one-third charged. Charge as soon as possible.
J (red)
Low battery. Charge battery.
A (blinks red)
Battery exhausted. Turn camera o and recharge battery.
P
22
Basic Setup
Basic Setup
A language-selection dialog is displayed the rst time the camera is turned on. Set up the camera as
described below (you can reset the clock or change languages at any time using the F DATE/TIME
or Q a options in the setup menu; for information on displaying the setup menu, see page 106).
1
Choose a language.
START MENU
NOSET
ENGLISH
FRANCAIS
DEUTSCH
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip will be dis-
played the next time the camera is turned on.
2
Set the date and time.
NOSET
YY. MM. DD
DATE / TIME NOT SET
1. 1
2016
12
:
00
AM
2015
2014
2018
2017
Press the selector left or right to highlight the year, month, day, hour,
or minute and press up or down to change. To change the order in
which the year, month, and day are displayed, highlight the date for-
mat and press the selector up or down. Press MENU/OK to exit to shoot-
ing mode when settings are complete.
R If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
23
First Steps
Basic Setup
Changing Basic Settings
Changing Basic Settings
To change the language or reset the clock:
1
Display the desired option.
Display the setup menu and select Q a to change the language or F DATE/TIME to
reset the clock (P 105).
2
Adjust settings.
To choose a language, highlight the desired option and press MENU/OK. To set the clock, press the
selector left or right to highlight the year, month, day, hour, or minute and press up or down to
change, then press MENU/OK once the clock has been set to your satisfaction.
24
Choosing a Display
Choosing a Display
The camera is equipped with an electronic view nder (EVF) and an LCD monitor (LCD). Follow the
steps below to choose a display.
1
Display the setup menu.
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector left to highlight
the tab for the current menu.
1.3 Press the selector down to high-
light the setup menu tab con-
taining u EVF/LCD SETTING.
1.4 Press the selector right to place
the cursor in the setup menu.
2
Select u EVF/LCD SETTING.
Highlight u EVF/LCD SETTING
and press MENU/OK.
3
Choose a display.
Highlight one of the following op-
tions and press MENU/OK.
Option
Option
Description
Description
E
E
EYE
EYE
SENSOR
SENSOR
Automatic
display selection
using eye sensor
LCD
EVF
LCD
LCD
LCD monitor
only
LCD
EVF
EVF View nder only
EVF
EVF ONLY
EVF ONLY
+
+
E
E
View nder only;
eye sensor turns
display on or o
EVF
The Eye Sensor
The Eye Sensor
The eye sensor turns the view nder on when you put your eye to the view nder and turns
it o when you take your eye away (note that the eye sensor may respond to objects other
than your eye or to light shining directly on the sensor). If automatic display selection is
enabled, the LCD monitor will turn on when the view nder turns o .
Eye sensor
25
First Steps
Choosing a Display
The View nder Display
The View nder Display
When ON is selected for A SCREEN SET-UP>
EVF AUTOROTATE DISPLAYS in the setup
menu (P 107), the indicators in the view nder au-
tomatically rotate to match camera orientation.
M
4000 5.6 400
Orientation changed from “wide” to “tall”
4000 5.6
400
Q The display in the LCD monitor is una ected.
Focusing the View nder
Focusing the View nder
The camera is equipped with diopter adjustment
in the range –4 to +2 m
–1
to accommodate indi-
vidual di erences in vision. Rotate the diopter
adjustment control until the view nder display is
in sharp focus.
Diopter adjustment control
Adjusting Display Brightness
Adjusting Display Brightness
The brightness of the view nder and LCD moni-
tor can be adjusted using the options under
A SCREEN SET-UP. Choose EVF BRIGHTNESS
to adjust view nder brightness (P 108) or LCD
BRIGHTNESS to do the same for the LCD moni-
tor (P 108).
26
The
The
DISP/BACK
DISP/BACK
Button
Button
The DISP/BACK button controls the display of indicators in the view-
nder and LCD monitor.
■ View nder: Shooting
Standard Information o
P
5.6 4004000
■ LCD Monitor: Shooting
Standard Information o
P
5.6 4004000
5.6 400
4000
Info display
27
First Steps
The DISP/BACK Button
■ Customizing the Standard Display
To choose the items shown in the standard display:
1
Display standard indicators.
Press the DISP/BACK button until standard indicators are displayed.
2
Select DISP. CUSTOM SETTING.
Select A SCREEN SET-UP> DISP. CUSTOM SETTING in the setup menu.
3
Choose items.
Highlight items and press MENU/OK to select or deselect.
• FRAMING GUIDELINE
• ELECTRONIC LEVEL
• FOCUS FRAME
• AF DISTANCE INDICATOR
• MF DISTANCE INDICATOR
• HISTOGRAM
• SHOOTING MODE
• APERTURE/S-SPEED/ISO
• INFORMATION BACKGROUND
• EXPOSURE COMPENSATION
• FOCUS MODE
• PHOTOMETRY
• SHUTTER TYPE
• FLASH
• CONTINUOUS MODE
• DUAL IS MODE
• WHITE BALANCE
• FILM SIMULATION
• DYNAMIC RANGE
• FRAMES REMAINING
• IMAGE SIZE/QUALITY
• MOVIE MODE & REC. TIME
• BATTERY LEVEL
4
Save changes.
Press DISP/BACK to save changes.
5
Exit the menus.
Press DISP/BACK as needed to exit the menus and return to the shooting display.
R See page 7 for the locations of these items in the displays.
28
The DISP/BACK Button
Virtual Horizon
Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two
lines overlap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P
■ View nder/LCD Monitor: Playback
Standard Information o Info display Favorites
12/31/2050 10:00 AM
1/ 4 0 0 0
1/4000
+2
1
/
3
+2
1
/
3
400
400
5.6
5.6
12/31/2050 10:00 AM
NEXT
1/4000 5.6 400 +2
1
/
3
12/31/2050 10:00 AM
FAVORITES
Histograms
Histograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Shadows Highlights
No. of pixels
Pixel brightness
Optimal exposure: Pixels are distrib-
uted in an even curve through-
out the tone range.
Overexposed: Pixels are clustered
on the right side of the graph.
Underexposed: Pixels are clustered
on the left side of the graph.
29
Basic Photography and Playback
Basic Photography and Playback
Basic Photography and Playback
Taking Photographs
Taking Photographs
This section describes how to take pictures using program AE (mode P). See pages 48 – 50 for informa-
tion on S, A, and M modes and pages 51 and 52 for information on the options available in auto mode.
1
Adjust settings for program AE.
C
④
B
A
A
Shutter speed (P 47): Select A (auto)
B
Aperture (P 47): Select A (auto)
C
Focus mode (P 68): Select S (single AF)
D
DRIVE mode (P 60): Select B (still image)
Con rm that P appears in
the display.
Q If AUTO is displayed in red,
press a function button (by
default, Fn2/AUTO) to exit
auto mode (P 51).
R Image stabilization (P 12)
is recommended.
P
4000
5.6
400
The Q Button
The Q Button
The Q button can be used to view and adjust
camera settings (P 41).
30
Taking Photographs
2
Ready the camera.
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
ngers and other objects
away from the lens, ash,
and AF-assist illuminator.
3
Frame the picture.
Lenses with Zoom Rings
Lenses with Zoom Rings
Use the zoom ring to frame
the picture in the display.
A
Zoom
ring
4
Focus.
Frame the picture with your sub-
ject in the center of the display and
press the shutter button halfway to
focus.
R If the subject is poorly lit, the AF-assist illumina-
tor may light (P 92).
If the camera is able to focus, it will beep twice and
the focus indicator and area in focus will glow
green. Focus and exposure will lock while the
shutter button is pressed halfway.
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the fo-
cus indicator will blink white.
5
Shoot.
Smoothly press the shutter button
the rest of the way down to take the
picture.
31
Basic Photography and Playback
Viewing Pictures
Viewing Pictures
Viewing Pictures Full Frame
Viewing Pictures Full Frame
Pictures can be viewed in the view nder or LCD monitor. When taking important pictures, take a test
shot and check the results.
To view pictures full frame, press a.
100-0001
Additional pictures can be viewed by pressing the selector left or right or rotating the com-
mand dial. Press the selector or rotate the dial right to view pictures in the order recorded,
left to view pictures in reverse order. Keep the selector pressed to scroll rapidly to the de-
sired frame.
R Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display
correctly and that playback zoom may not be available.
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press the selector up and down to select from zero to ve stars.
32
Viewing Pictures
Viewing Photo Information
Viewing Photo Information
The photo information display changes
each time the selector is pressed up.
Basic data Info display 1
12/31/2050 10:00 AM
1/ 4 0 0 0
1/4000
+2
1
/
3
+2
1
/
3
400
400
5.6
5.6
12/31/2050 10:00 AM
NEXT
1/4000 5.6 400 +2
1
/
3
1/4000
S.S
5.6
F
400 +2
1
/
3
ISO
LENS
23.0
mm
F
5.6
FOCAL LENGTH
23.0
mm
COLOR SPACE sRGB
LENS MODULATION OPT.
ON
NEXT
Info display 2
R Rotate the command dial to view other images.
Zooming in on the Focus Point
Zooming in on the Focus Point
Press the center of the command dial to zoom in on
the focus point. Press the center of the command
dial again to return to full-frame playback.
33
Basic Photography and Playback
Viewing Pictures
Playback Zoom
Playback Zoom
Press k to zoom in on the current picture, n to zoom out (to view multiple images, press n when
the picture is displayed full frame; P 34). When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display. Press DISP/BACK or MENU/OK to exit zoom.
Zoom indicator
Navigation window shows
portion of image currently
displayed
R The maximum zoom ratio varies with image size (P 93). Playback zoom is not available with cropped or resized
copies saved at a size of a.
34
Viewing Pictures
Multi-Frame Playback
Multi-Frame Playback
To change the number of images displayed, press n when a picture is displayed full frame.
Press n to view
more images.
100-0001
100-0001
Press k to view
fewer images.
Use the selector to highlight images and press MENU/OK to view the highlighted image full frame (to
zoom in on the selected image, press k when the picture is displayed full frame; P 33). In the nine-
and hundred-frame displays, press the selector up or down to view more pictures.
35
Basic Photography and Playback
Deleting Pictures
Deleting Pictures
To delete individual pictures, multiple selected pictures, or all pictures, press the b button when a
picture is displayed full frame and choose from the options below. Note that deleted pictures can not
be recovered. Copy important pictures to a computer or other storage device before proceeding.
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
Option
Option
Description
Description
FRAME
FRAME
Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture
(a confirmation dialog is not displayed).
SELECTED FRAMES
SELECTED FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or print orders are shown
by S). When the operation is complete, press DISP/BACK to display a con rmation dialog, then highlight OK
and press MENU/OK to delete the selected pictures.
ALL FRAMES
ALL FRAMES
A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not
be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 101).
R Pictures can also be deleted by A ERASE from playback menu.
R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete
the pictures.
36
Using the Flash
Using the Flash
Use the built-in ash for additional lighting when shooting at night or indoors under low light.
1
Press the N button to raise the ash.
Q The ash may contact accessories mounted on the hot shoe. If necessary,
remove accessories before raising the ash.
2
Press the function button (Fn5) to display the following options, then
use the selector to highlight an option and press MENU/OK to select.
Mode
Mode
Description
Description
AUTO
AUTO
(AUTO FLASH)
(AUTO FLASH)
/
/
K
K
(RED EYE REDUCTION)
(RED EYE REDUCTION)
*
*
The ash res when required. Recommended in most situa-
tions.
N
N
(FORCED FLASH)
(FORCED FLASH)
/
/
L
L
(FORCED FLASH)
(FORCED FLASH)
*
*
The ash res whenever a picture is taken. Use for backlit sub-
jects or for natural coloration when shooting in bright light.
F
F
(SLOW SYNCHRO)
(SLOW SYNCHRO)
/
/
M
M
(RED EYE & SLOW)
(RED EYE & SLOW)
*
*
Capture both the main subject and the background under low
light (note that brightly lit scenes may be overexposed).
l
l
(2ND CURTAIN SYNC.)
(2ND CURTAIN SYNC.)
/
/
d
d
(2ND CURTAIN SYNC.)
(2ND CURTAIN SYNC.)
*
*
The ash res immediately before the shutter closes.
D
D
(COMMANDER)
(COMMANDER)
The built-in ash can be used to control optional remote ash
units.
P
P
(SUPPRESSED FLASH)
(SUPPRESSED FLASH)
The ash does not re even when the subject is poorly lit. A
tripod is recommended.
* Red-eye removal is available in these modes when Intelligent Face Detection is active
(P 91) and red-eye removal is on (P 96). Red-eye removal minimizes “red-eye” caused
when light from the ash is re ected from the subject’s retinas as shown in the illustra-
tion at right.
37
Basic Photography and Playback
Using the Flash
Q Depending on the distance to the subject, some lenses may cast shadows in photos taken with the ash.
R Lowering the ash turns the ash o (P) and prevents it ring even when the subject is poorly lit; use of a
tripod is recommended. Lower the ash where ash photography is prohibited or to capture natural lighting
under dim light. We also recommend that you lower the ash when the camera is o .
R If p is displayed when the shutter button is pressed halfway, the ash will re when the photo is taken.
R Except in commander mode, the ash may re several times with each shot. Do not move the camera until
shooting is complete.
Flash Sync Speed
Flash Sync Speed
The ash will synchronize with the shutter at shutter speeds of
/
s or slower.
Optional Flash Units
Optional Flash Units
The camera can also be used with optional FUJIFILM shoe-mounted ash units. Do not use third-party ash
units that apply over 300 V to the camera hot shoe.
38
Basic Movie Recording and Playback
Basic Movie Recording and Playback
Recording Movies
Recording Movies
The camera can be used to record short high-de nition movies. Sound is recorded in stereo via the
built-in microphone; do not cover the microphone during recording.
1
Press the function button (Fn7/Fn) to start record-
ing.
Recording indicator
Time remaining
2
Press the button again to end recording. Re-
cording ends automatically when the maximum
length is reached or the memory card is full.
R Zoom can be adjusted while recording is in progress.
R Sensitivity and frame size and rate can be selected
using the W MOVIE SET-UP option (P 96). Focus
mode is selected using the focus mode selector
(P 68); for continuous focus adjustment, select C ,
or choose S and enable Intelligent Face Detection
(P 91). Intelligent Face Detection is not available in
focus mode M.
R During recording, exposure compensation can be
adjusted by up to ±2EV.
R The indicator lamp lights while movies are being
recorded.
Q The microphone may pick up lens noise and other
sounds made by the camera during recording.
Q Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Depth of Field
Depth of Field
Adjust aperture before recording begins. Choose
low f-numbers to soften background details.
39
Basic Movie Recording and Playback
Recording Movies
Using an External Microphone
Using an External Microphone
Sound can be recorded with external microphones that connect using jacks 2.5 mm
in diameter; microphones that require bus power can not be used. See the micro-
phone manual for details.
R The dialog shown at right will be displayed when a microphone is connected to the mi-
crophone/remote release connector. Press MENU/OK and select MIC/REMOTE RELEASE>
m MIC.
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
40
Viewing Movies
Viewing Movies
During playback, movies are displayed as shown at right. The following operations
can be performed while a movie is displayed:
Operation
Operation
Description
Description
Start/pause playback
Start/pause playback
Press the selector down to start playback. Press again to pause. While playback is
paused, you can press the selector left or right to rewind or advance one frame
at a time.
End playback
End playback Press the selector up to end playback.
Adjust speed
Adjust speed Press the selector left or right to adjust playback speed during playback.
Adjust volume
Adjust volume
Press MENU/OK to pause playback and display volume controls. Press the selec-
tor up or down to adjust the volume; press MENU/OK again to resume playback.
Volume can also be adjusted using b SOUND SET-UP > PLAYBACK VOLUME
(P 107).
12/31/2050 10:00 AM
PLAYPLAY
±0
Movie icon
Progress is shown in the display during playback.
Q Do not cover the speaker during playback.
Q Sound is not played back if OFF is selected for o SOUND & FLASH (P 106).
Progress bar
STOP PAUSE
29m59s
Playback Speed
Playback Speed
Press the selector left or right to adjust playback speed during playback. Speed is shown by the
number of arrows (M or N).
Arrow
STOP PAUSE
29m59s
41
The Q (Quick Menu) Button
The Q (Quick Menu) Button
The Q (Quick Menu) Button
Using the Q Button
Using the Q Button
Press Q for quick access to selected options.
The Quick Menu Display
The Quick Menu Display
At default settings, the quick menu contains the following items.
SET
SELECT CUSTOM SETTING
BASE
A
A
u SELECT CUSTOM SETTING ...................... 84
B
B
N ISO ........................................................... 75
C
C
U DYNAMIC RANGE ................................... 93
D
D
D WHITE BALANCE .................................... 82
E
E
h NOISE REDUCTION ................................. 94
F
F
O IMAGE SIZE ............................................. 93
G
G
T IMAGE QUALITY ..................................... 93
H
H
P FILM SIMULATION ................................. 59
I
I
r HIGHLIGHT TONE ................................... 94
J
J
s SHADOW TONE ....................................... 94
K
K
f COLOR ..................................................... 94
L
L
q SHARPNESS ............................................ 94
M
M
B SELF-TIMER ............................................ 79
N
N
F AF MODE ................................................. 71
O
O
p FLASH MODE .......................................... 36
P
P
J EVF/LCD BRIGHTNESS.......................... 108
R hCUSTOM and kCOLOR TEMPERATURE white balance options can not be
accessed using the Q button. Use a function button or the shooting menu.
The quick menu shows the options currently selected for items
B
—
P
, which can be changed as
described on page 43. The u SELECT CUSTOM SETTING item (item
A
)
shows the current custom
settings bank:
• q: No custom settings bank selected.
• t — u: Select a bank to view the settings saved using the K EDIT/SAVE CUSTOM SETTING
option in the shooting menu (P 94).
42
Using the Q Button
Viewing and Changing Settings
Viewing and Changing Settings
1
Press Q to display the quick menu during shooting.
2
Use the selector to highlight items and rotate the command dial to change.
3
Press Q to exit when settings are complete.
43
The Q (Quick Menu) Button
Using the Q Button
Editing the Quick Menu
Editing the Quick Menu
To choose the items displayed in the quick menu:
1
Press and hold the Q button during shooting.
SET END
SELECT CUSTOM SETTING
2
The current quick menu will be displayed; use the selector to highlight the item you wish to change
and press MENU/OK. You will be given the following choice of items to assign to the selected position:
• SELECT CUSTOM SETTING
• ISO
• DYNAMIC RANGE
• WHITE BALANCE
• NOISE REDUCTION
• IMAGE SIZE
• IMAGE QUALITY
• FILM SIMULATION
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• SELF-TIMER
• FACE DETECTION
• PHOTOMETRY
• AF MODE
• FLASH MODE
• FLASH COMPENSATION
• IS MODE
• MF ASSIST
• MOVIE MODE
• MOVIE ISO
• MIC LEVEL ADJUSTMENT
• SOUND & FLASH
• EVF/LCD BRIGHTNESS
• SHUTTER TYPE
• NONE
R Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected,
current settings are shown in the quick menu by the label BASE.
3
Highlight the desired item and press MENU/OK to assign it to the selected position.
R The quick menu can also be edited using the h BUTTON/DIAL SETTING> EDIT/SAVE QUICK MENU
option in the setup menu (P 109).
44
The Fn (Function) Buttons
The Fn (Function) Buttons
Using the Function Buttons
Using the Function Buttons
The roles played by each of the function buttons can be selected by pressing and holding the button.
The default options are shown below:
Fn1/AE button Fn2/AUTO button Fn3 button Fn4 button
Photometry (P 58) Auto mode on/o (P 51) AF mode (P 71) Film simulation (P 59)
Fn5 button Fn6 button Fn7/Fn button
Flash mode (P 36) Focus-frame selection (P 72) Movie recording (P 38)
45
Using the Function Buttons
The Fn (Function) Buttons
Assigning Roles to the Function Buttons
Assigning Roles to the Function Buttons
To assign roles to the function buttons, press and hold the DISP/BACK button until the menu below is
displayed. Select buttons to choose their roles.
FUNCTION
(
Fn
)
SETTING
• PREVIEW DEPTH OF FIELD (P 49)
• ISO (P 75)
• SELF-TIMER (P 79)
• IMAGE SIZE (P 93)
• IMAGE QUALITY (P 93)
• DYNAMIC RANGE (P 93)
• FILM SIMULATION (P 59)
• WHITE BALANCE (P 82)
• PHOTOMETRY (P 58)
• AF MODE (P 71)
• FOCUS AREA (P 72)
• FLASH MODE (P 36)
• FLASH COMPENSATION (P 96)
• SELECT CUSTOM SETTING (P 84)
• MOVIE (P 38)
• FACE DETECTION (P 91)
• RAW (P 77)
• APERTURE SETTING (P 97)
• WIRELESS COMMUNICATION (P 117)
• SHUTTER TYPE (P 98)
• PREVIEW EXP. IN MANUAL MODE (P 107)
• PREVIEW PIC. EFFECT (P
108)
• COMMAND DIAL SETTING (P
109
)
• AUTO MODE ON/OFF (P 51)
• EVF/LCD SETTING (P 24)
• NONE
R To disable the selected button, choose NONE.
R You can also display options for any of the function buttons by pressing and holding the button.
R The roles played by the function buttons can also be selected using h BUTTON/DIAL SETTING> FUNCTION
(Fn) SETTING (P 109).
46
More on Photography and Playback
More on Photography and Playback
Mode Selection
Mode Selection
The camera offers a choice of modes in which you can manually adjust shutter speed and/or
aperture (P, S, A, and M modes; P 47, 48, 49, 50) and auto modes in which settings are automatically
adjusted for the subject or the selected scene (P 51).
P, S, A, and M Modes
P, S, A, and M Modes
Choose P, S, A, or M mode for manual control over shut-
ter speed and/or aperture. The role of the command dial
varies with the mode selected.
Aperture mode switch
Shutter speed dial
Aperture ring
Mode
Mode
Description
Description
Role of command dial
Role of command dial
P
P
P
P
Program AE: The camera adjusts settings automatically, but you can use the
command dial to choose from combinations of shutter speed and aperture
that will produce optimal exposure (program shift).
Program shift
Program shift
47
47
S
S
Shutter-priority auto: You choose the shutter speed using the shutter speed
and command dials and let the camera adjust aperture for optimal expo-
sure.
Shutter speed ne-tuning
Shutter speed ne-tuning
48
48
A
A
Aperture-priority auto: You choose the aperture using the aperture ring and
let the camera adjust shutter-speed for optimal exposure.
—
—
49
49
M
M Manual exposure: You control both shutter speed and aperture.
Shutter speed ne-tuning
Shutter speed ne-tuning
50
50
R For information on the role of the command dial when the camera is used with lenses not equipped with an
aperture ring, see “Lenses with No Aperture Rings” (P 11).
47
More on Photography and Playback
Mode Selection
■ Program AE (P)
To allow the camera to adjust both shutter speed and ap-
erture for optimal exposure, set shutter speed and aper-
ture to A. P will appear in the display.
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 51).
Q If the subject is outside the metering range of the camera,
the shutter speed and aperture displays will show “– – –”.
P
4000
5.6
400
Program Shift
Program Shift
If desired, you can rotate the command dial to select other combinations of shut-
ter speed and aperture without altering exposure (program shift). The new values
for shutter speed and aperture are shown in yellow. Program shift is not available
if the attached ash supports TTL auto, or if an auto option is selected for U DY-
NAMIC RANGE in the shooting menu (P 93). To cancel program shift, turn the
camera o .
R For information on the role of the command dial when the camera is used with
lenses not equipped with an aperture ring, see “Lenses with No Aperture Rings”
(P 11).
P
4000
5.6
400
Shutter speed
Aperture
48
Mode Selection
■ Shutter-Priority AE (S)
To adjust shutter speed manually while letting the cam-
era select aperture for optimal exposure, set aperture to
A and use the shutter speed dial. S will appear in the dis-
play.
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 51).
5.6
400
S
2000
R At settings other than 180X, shutter speed can also be adjusted in increments of
/
EV by rotating the command
dial. Shutter speed can be adjusted even while the shutter button is pressed halfway.
R For information on the role of the command dial when the camera is used with lenses not equipped with an
aperture ring, see “Lenses with No Aperture Rings” (P 11).
Q If the correct exposure can not be achieved at the selected shutter speed, aperture will be displayed in red
when the shutter button is pressed halfway. Adjust shutter speed until the correct exposure is achieved.
Q If the subject is outside the metering range of the camera, the aperture display will show “– – –”.
49
More on Photography and Playback
Mode Selection
■ Aperture-Priority AE (A)
To adjust aperture manually while letting the camera se-
lect shutter speed for optimal exposure, rotate the shutter
speed dial to A and adjust aperture as desired. A will ap-
pear in the display.
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 51).
A
4000
5.6
400
R Aperture can be adjusted even while the shutter button is pressed halfway.
Q If the correct exposure can not be achieved at the selected aperture, the shutter speed will be displayed in red
when the shutter button is pressed halfway. Adjust aperture until the correct exposure is achieved.
Q If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”.
Previewing Depth of Field
Previewing Depth of Field
When L PREVIEW DEPTH OF FIELD is assigned to a function button (P 45),
pressing the button stops aperture down to the selected setting, allowing depth
of eld to be previewed in the display.
Depth of eld can also be previewed using the depth-of- eld indicator in the
standard display. Press DISP/BACK to cycle through display modes until standard
indicators are displayed.
A
5.6
400
01 0.5 1.0 1.5 2.0 3.0 5.0 10
5
1.0 1.5 2.0 3.0 5.0
Depth of eld
50
Mode Selection
■ Manual Exposure (M)
Exposure can be altered from the value suggested by the
camera by setting both shutter speed and aperture to
values other than A. M will appear in the display.
Aperture mode switch
Q If AUTO is displayed in red, press a function button (by default,
Fn2/AUTO) to exit auto mode (P 51).
R At settings other than 180X, shutter speed can also be ad-
justed in increments of
/
EV by rotating the command dial.
01 0.5 1.0 1.5 2.0 3.0 5.0 10
M
5.6
400
2000
R The manual exposure display includes an exposure indicator that shows the amount the picture would be
under- or over-exposed at current settings.
R For information on the role of the command dial when the camera is used with lenses not equipped with an
aperture ring, see “Lenses with No Aperture Rings” (P 11).
Exposure Preview
Exposure Preview
To preview exposure in the LCD monitor, select ON for A SCREEN
SET-UP> PREVIEW EXP. IN MANUAL MODE. Select OFF when
using the ash or on other occasions on which exposure may
change when the picture is taken.
51
More on Photography and Playback
Mode Selection
Auto Modes
Auto Modes
Press a function button (by default, Fn2/AUTO) to select an auto mode in which the camera automati-
cally adjusts settings according to the scene or shooting conditions.
1
Press the function button (Fn2/AUTO) to enable auto mode.
Q AUTO is displayed in red when auto mode
is selected.
2
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight A SCENE POSITION and press MENU/OK (P 90).
3
Press the selector up or down to highlight the desired option and press MENU/OK to select.
Mode
Mode
Description
Description
S
S
ADVANCED SR AUTO
ADVANCED SR AUTO The camera automatically optimizes settings to suit the scene (P 52).
h
h
PORTRAIT
PORTRAIT
Choose for portraits.
Z
Z
PORTRAIT ENHANCER
PORTRAIT ENHANCER
Processes portraits to give the subject a smooth, natural-looking complexion.
M
M
LANDSCAPE
LANDSCAPE
Choose for daylight shots of buildings and landscapes.
N
N
SPORT
SPORT
Choose when photographing moving subjects.
O
O
NIGHT
NIGHT
Choose for poorly lit twilight or night scenes.
H
H
NIGHT (TRIPOD)
NIGHT (TRIPOD)
Choose this mode for slow shutter speeds when shooting at night.
p
p
FIREWORKS
FIREWORKS
Slow shutter speeds are used to capture the expanding burst of light from a rework.
Q
Q
SUNSET
SUNSET
Choose this mode to record the vivid colors in sunrises and sunsets.
R
R
SNOW
SNOW
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white
snow.
52
Mode Selection
Mode
Mode
Description
Description
s
s
BEACH
BEACH
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
f
f
UNDERWATER
UNDERWATER
Reduces the blue cast typically associated with underwater lighting.
U
U
PARTY
PARTY
Capture indoor background lighting under low-light conditions.
V
V
FLOWER
FLOWER
E ective for taking more vivid shots of owers.
W
W
TEXT
TEXT
Take clear pictures of text or drawings in print.
■ SADVANCED SR AUTO
The scene selected by the camera in S ADVANCED SR AUTO mode is shown
by an icon in the display.
a AUTO
c LANDSCAPE
d NIGHT
h NIGHT (TRIPOD)
e MACRO
v SUNSET
x SKY
z SKY & GREENERY
g BACKLIT PORTRAIT
a PORTRAIT&MOTION
u BEACH
w SNOW
y GREENERY
d PORTRAIT
c MOVING OBJECT
b BACKLIT PORTRAIT&MOTION
Q The mode selected may vary with shooting conditions. If the mode and subject do not match, select a scene
manually.
53
More on Photography and Playback
Long Time-Exposures (T/B)
Long Time-Exposures (T/B)
Select a shutter speed of T (time) or B (bulb) for long time-exposures.
R Use of a tripod is recommended to prevent the camera from moving during the exposure.
R To reduce “noise” (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR in the shooting
menu (P 94). Note that this may increase the time needed to record images after shooting.
Time (T)
Time (T)
1
Rotate the shutter speed dial to T.
2
Rotate the command dial to choose
the exposure time.
3
Press the shutter button all the way
down to take a picture at the select-
ed shutter speed. A count-down
timer will be displayed while the ex-
posure is in progress.
R For information on the role of the command dial
when the camera is used with lenses not equipped
with an aperture ring, see “Lenses with No Aperture
Rings” (P 11).
Bulb (B)
Bulb (B)
1
Rotate the shutter speed dial to B.
2
Press the shutter button all the way
down. The shutter will remain open
for up to 60 minutes while the shut-
ter button is pressed; the display
shows the time elapsed since the
exposure started.
R Selecting an aperture of A xes shutter speed at 30 s.
54
Long Time-Exposures (T/B)
Using a Remote Release
Using a Remote Release
An optional RR-90 remote release can be used for
long time-exposures. See the manual provided
with the RR-90 for more information.
Third-Party Remote Releases
Third-Party Remote Releases
• Third-party remote releases (available from third-
party suppliers) can be connected as shown below.
• Electronic releases from third-party suppliers can
be connected via the microphone/remote release
connector. A con rmation dialog will be displayed
when a third-party release is connected; press
MENU/OK and select n REMOTE for MIC/REMOTE
RELEASE.
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
55
More on Photography and Playback
Exposure Compensation
Exposure Compensation
Rotate the exposure compensation dial to adjust
exposure when photographing very bright, very
dark, or high-contrast subjects. The e ect is vis-
ible in the display.
P
4000
5.6
400
Exposure compensation indicator
Choose positive values (+) to
increase exposure
Choose negative values (–) to
reduce exposure
Q The amount of compensation available varies with
the shooting mode.
Exposure Value (EV)
Exposure Value (EV)
The exposure value is determined by the sensitiv-
ity of the image sensor and the amount of light to
which the sensor is exposed. Doubling the amount
increases EV by one, while halving it reduces EV by
one. The amount of light entering the camera can be
controlled by adjusting aperture and shutter speed.
Choosing an Exposure Compensation Value
Choosing an Exposure Compensation Value
• Backlit subjects: Choose values
from +
/
EV to +1
/
EV.
• Highly re ective subjects or very
bright scenes (e.g., snow elds): +1 EV
• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against dark back-
grounds): –
/
EV
• Subjects with low re ectivity (pine trees or dark-colored foliage):
–
/
EV
56
Focus/Exposure Lock
Focus/Exposure Lock
To compose photographs with o -center subjects:
1
Focus: Position the subject in the focus frame and press the shutter button half-
way to lock focus and exposure. Focus and exposure will remain locked while
the shutter button is pressed halfway (AF/AE lock).
P
R Focus and exposure can also be locked with the AF-L and AE-L buttons, respectively (if AE/AF LOCK is
selected for d AF-LOCK BUTTON in the shooting menu, pressing the AF-L button will lock both focus
and exposure; P 95).
2
Recompose: Keep the shutter button pressed halfway or keep the AF-L or AE-L but-
ton pressed.
R Focus and/or exposure will remain locked while the AF-L or AE-L button is pressed,
whether or not the shutter button is pressed halfway. If AE&AF ON/OFF SWITCH is
selected for v AE/AF-LOCK MODE (P 95), focus and/or exposure lock when the but-
ton is pressed and remain locked until the button is pressed again.
P
3
Shoot: Press the shutter button all the way down.
P
R The roles of the AE-L and AF-L buttons can be reversed using the h BUTTON/DIAL SETTING > AE-L/AF-L
BUTTON SETTING option in the setup menu.
57
More on Photography and Playback
Focus/Exposure Lock
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
• Subjects photographed through a window or other re ective object.
• Dark subjects and subjects that absorb rather than re ect light, such as hair or fur.
• Insubstantial subjects, such as smoke or ame.
• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
58
Metering
Metering
To choose how the camera meters exposure, press the function but-
ton (Fn1/AE) to display metering options. Use the selector to high-
light an option and press MENU/OK to select.
Q The selected option will only take e ect when Intelligent Face Detection
is o (P 91).
Mode
Mode
Description
Description
o
o
(MULTI)
(MULTI)
The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution.
Recommended in most situations.
p
p
(SPOT)
(SPOT)
The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recom-
mended with backlit subjects and in other cases in which the background is much brighter or darker than the main
subject.
q
q
(AVERAGE)
(AVERAGE)
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same
lighting, and is particularly e ective for landscapes and portraits of subjects dressed in black or white.
R Metering options can also be accessed from the shooting menu (P 95).
59
More on Photography and Playback
Film Simulation
Film Simulation
Simulate the e ects of di erent kinds of lm, including black-and-
white (with or without color lters). Press the function button (Fn4)
to display the following options, then use the selector to highlight an
option and press MENU/OK to select.
Option
Option
Description
Description
c
c
(PROVIA/STANDARD)
(PROVIA/STANDARD)
Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes.
>
>
(Velvia/VIVID)
(Velvia/VIVID)
A high-contrast palette of saturated colors, suited to nature photos.
e
e
(ASTIA/SOFT)
(ASTIA/SOFT)
Enhances the range of hues available for skin tones in portraits while preserving the bright blues
of daylight skies. Recommended for outdoor portrait photography.
i
i
(CLASSIC CHROME)
(CLASSIC CHROME)
Soft color and enhanced shadow contrast for a calm look.
g
g
(PRO Neg. Hi)
(PRO Neg. Hi)
O ers slightly more contrast than h (PRO Neg. Std). Recommended for outdoor portrait pho-
tography.
h
h
(PRO Neg. Std)
(PRO Neg. Std)
A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good
choice for studio portrait photography.
;
;
(MONOCHROME)
(MONOCHROME)
Take pictures in standard black and white.
e
e
(MONOCHROME + Ye FILTER)
(MONOCHROME + Ye FILTER)
Take black-and-white pictures with slightly increased contrast. This setting also slightly tones
down the brightness of the sky.
d
d
(MONOCHROME + R FILTER)
(MONOCHROME + R FILTER)
Take black-and-white pictures with increased contrast. This setting also tones down the bright-
ness of the sky.
f
f
(MONOCHROME + G FILTER)
(MONOCHROME + G FILTER)
Soften skin tones in black-and-white portraits.
f
f
(SEPIA)
(SEPIA)
Take pictures in sepia.
R Film simulation options can be combined with tone and sharpness settings (P 94).
R Film simulation options can also be accessed from the shooting menu (P 93).
60
The DRIVE Button
The DRIVE Button
The DRIVE button gives you access to the following options.
STILL IMAGE
Drive mode
Drive mode
P
P
Available in
Available in
B
B
STILL IMAGE
STILL IMAGE
—
—
All shooting modes
All shooting modes
I
I
CONTINUOUS
CONTINUOUS
61
61
O
O
AE BKT
AE BKT
62
62
Modes
Modes
P
P
,
,
S
S
,
,
A
A
, and
, and
M
M
W
W
ISO BKT
ISO BKT
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
H
H
WHITE BALANCE BKT
WHITE BALANCE BKT
Y
Y
DYNAMIC RANGE BKT
DYNAMIC RANGE BKT
Adv. MODE
Adv. MODE
All shooting modes
All shooting modes
(but note that camera functions in auto mode when auto mode is selected)
(but note that camera functions in auto mode when auto mode is selected)
u
u
MOTION PANORAMA
MOTION PANORAMA
63
63
j
j
MULTIPLE EXPOSURE
MULTIPLE EXPOSURE
66
66
Y
Y
ADVANCED FILTER
ADVANCED FILTER
67
67
61
More on Photography and Playback
The DRIVE Button
1
Press the DRIVE button to display drive options.
2
Press the selector up or down to highlight I,
then press the selector left or right to choose
a frame rate of J (high) or O (low). Press
MENU/OK to proceed when settings are com-
plete.
3
Press the shutter button halfway to focus.
4
Press the shutter button the rest of the way
down to start shooting. Shooting ends when
the shutter button is released, the maximum
number of pictures has been taken, or the
memory card is full.
R Frame rate varies with the subject, shutter speed,
sensitivity, and focus mode and may slow as more
shots are taken.
R The ash turns o automatically; the previously-se-
lected ash mode is restored when burst shooting
is disabled.
R Additional time may be required to record pictures
when shooting ends.
R If le numbering reaches 999 before shooting is
complete, the remaining pictures will be recorded
to a new folder (P 110).
R In some drive modes, shooting may not begin if the
space available on the memory card is insu cient.
Focus and Exposure
Focus and Exposure
To vary focus and exposure with each shot, select fo-
cus mode C; in other modes, focus and exposure are
determined by the rst shot in each series.
Q Selecting J in focus mode C restricts the choice of focus
frames (P 74).
Q Exposure and focus tracking performance may vary with
aperture, sensitivity, and shooting conditions.
Continuous Shooting (Burst Mode)
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
62
The DRIVE Button
Bracketing
Bracketing
Automatically vary settings over a series of pictures.
1
Press the DRIVE button to display drive options and press the se-
lector up or down to highlight one of the following:
Option
Option
Description
Description
AE BKT
AE BKT
Press the selector left or right to highlight a bracketing amount. Each time the shutter button is pressed,
the camera will take three shots: one using the metered value for exposure, the second overexposed by
the selected amount, and the third underexposed by the same amount (regardless of the amount selected,
exposure will not exceed the limits of the exposure metering system).
ISO BKT
ISO BKT
Press the selector left or right to highlight a bracketing amount. Each time the shutter is released, the cam-
era will take a picture at the current sensitivity (P 75) and process it to create two additional copies, one with
sensitivity raised and the other with sensitivity lowered by the selected amount (regardless of the amount
selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION
FILM SIMULATION
BKT
BKT
Each time the shutter is released, the camera takes one shot and processes it to create copies with the lm
simulation settings selected for X FILM SIMULATION BKT in the shooting menu (P 97).
WHITE BALANCE
WHITE BALANCE
BKT
BKT
Press the selector left or right to choose the bracketing amount. Each time the shutter button is pressed,
the camera takes three shots: one at the current white balanced setting, one with ne-tuning increased by
the selected amount, and another with ne-tuning decreased by the selected amount.
DYNAMIC RANGE
DYNAMIC RANGE
BKT
BKT
Each time the shutter button is pressed, the camera takes three shots with di erent dynamic ranges (P 93):
100% for the rst, 200% for the second, and 400% for the third. While dynamic range bracketing is in e ect,
sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in e ect is restored when
bracketing ends.
2
Press MENU/OK to select the highlighted option.
3
Take photographs.
63
More on Photography and Playback
The DRIVE Button
1
Press the DRIVE button to display drive options.
Press the selector up or down to highlight Adv.,
then press the selector left or right to highlight
r MOTION PANORAMA and press MENU/OK.
2
To select the size of the angle through which
you will pan the camera while shooting, press
the selector left. Highlight a size and press
MENU/OK.
3
Press the selector right to view a choice of pan
directions. Highlight a pan direction and press
MENU/OK.
4
Press the shutter button all the way down to
start recording. There is no need to keep the
shutter button pressed during recording.
5
Pan the camera in the direction shown by the
arrow. Shooting ends automatically when the
camera is panned to the end of the guides
and the panorama is complete.
8002.030
Sweep camera along yellow
line in direction of y
ANGLE DIRECTION
R Shooting ends if the shutter button is pressed all
the way down during shooting. No panorama
may be recorded if the shutter button is pressed
before the panorama is complete.
Panoramas
Panoramas
Follow an on-screen guide to create a panorama.
64
The DRIVE Button
Q Panoramas are created from multiple frames; expo-
sure for the entire panorama is determined by the
rst frame. The camera may in some cases record an
greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of
the panorama may not be recorded if shooting ends
before the panorama is complete.
Q Shooting may be interrupted if the camera is panned
too quickly or too slowly. Panning the camera in a
direction other than that shown cancels shooting.
Q The desired results may not be achieved with mov-
ing subjects, subjects close to the camera, unvary-
ing subjects such as the sky or a eld of grass, sub-
jects that are in constant motion, such as waves and
waterfalls, or subjects that undergo marked chang-
es in brightness. Panoramas may be blurred if the
subject is poorly lit.
For Best Results
For Best Results
For best results, use a lens with a focal length of
35 mm or less (50 mm or less in 35 mm format). Prop
your elbows against your sides and move the cam-
era slowly in a small circle at a steady speed, keeping
the camera parallel or at right angles to the horizon
and being careful only to pan in the direction shown
by the guides. Use a tripod for best results. If the
desired results are not achieved, try panning at a dif-
ferent speed.
65
More on Photography and Playback
The DRIVE Button
■ Viewing Panoramas
To zoom in on a panorama in full-frame playback, press the
k button and use the k and n buttons to zoom in and
out. Alternatively, you can play the panorama back using
the selector. Press the selector down to start playback and
press again to pause. While playback is paused, you can
scroll the panorama manually by pressing the selector left or right; vertical panoramas will scroll verti-
cally, horizontal panoramas horizontally. To exit to full-frame playback, press the selector up.
PLAY
STOP PAUSE
66
The DRIVE Button
Multiple Exposures
Multiple Exposures
Create a photograph that combines two exposures.
+
1
Press the DRIVE button to display drive options.
Press the selector up or down to highlight Adv.,
then press the selector left or right to highlight
jMULTIPLE EXPOSURE and press MENU/OK.
2
Take the rst shot.
3
Press MENU/OK. The rst shot will be shown su-
perimposed on the view through the lens and
you will be prompted to take the second shot.
R To return to Step 2 and retake the rst shot,
press the selector left. To save the rst shot and
exit without creating a multiple exposure, press
DISP/BACK.
4
Take the second shot, using the rst frame as a
guide.
5
Press MENU/OK to create the multiple exposure,
or press the selector left to return to Step 4
and retake the second shot.
67
More on Photography and Playback
The DRIVE Button
1
Press the DRIVE button to display drive options.
Press the selector up or down to highlight Y
and press MENU/OK.
2
Choose from the following lters and press
MENU/OK.
Filter
Filter
Description
Description
G
G
TOY CAMERA
TOY CAMERA
Choose for a retro toy camera
e ect.
H
H
MINIATURE
MINIATURE
The tops and bottoms of pic-
tures are blurred for a diorama
e ect.
I
I
POP COLOR
POP COLOR
Create high-contrast images
with saturated colors.
J
J
HIGH-KEY
HIGH-KEY
Create bright, low-contrast
images.
Z
Z
LOW-KEY
LOW-KEY
Create uniformly dark tones
with few areas of emphasized
highlights.
Filter
Filter
Description
Description
K
K
DYNAMIC TONE
DYNAMIC TONE
Dynamic tone expression is
used for a fantasy e ect.
X
X
SOFT FOCUS
SOFT FOCUS
Create a look that is evenly
soft throughout the whole
image.
u
u
PARTIAL COLOR (RED)
PARTIAL COLOR (RED)
Areas of the image that are
the selected color are record-
ed in that color. All other areas
of the image are recorded in
black-and-white.
v
v
PARTIAL COLOR (ORANGE)
PARTIAL COLOR (ORANGE)
w
w
PARTIAL COLOR (YELLOW)
PARTIAL COLOR (YELLOW)
x
x
PARTIAL COLOR (GREEN)
PARTIAL COLOR (GREEN)
y
y
PARTIAL COLOR (BLUE)
PARTIAL COLOR (BLUE)
z
z
PARTIAL COLOR (PURPLE)
PARTIAL COLOR (PURPLE)
R Depending on the subject and camera settings, im-
ages may in some cases be grainy or vary in bright-
ness and hue.
Advanced Filter
Advanced Filter
Take photos with lter e ects.
68
Focus Mode
Focus Mode
Use the focus mode selector to choose how the camera focuses (note
that regardless of the option selected, manual focus will be used when
the lens is in manual focus mode).
• S (single AF): Focus locks while the shutter button is pressed halfway.
Choose for stationary subjects.
• C (continuous AF): Focus is continually adjusted to re ect changes in the dis-
tance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion.
• M (manual): Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance,
right to increase. The manual focus indicator indicates how closely the focus distance matches the
distance to the subject in the focus brackets (the white line indicates the focus distance, the blue
bar the depth of eld, or in other words the distance in front of and behind the focus point that ap-
pears to be in focus); you can also check focus visually in the view nder or LCD monitor. Choose for
manual control of focus or in situations in which the camera is unable to focus using autofocus (P 57).
18
XF
ZOOM
A
18-55
23
35
55
Reduce focus
distance
Increase focus
distance
01 0.5 1.0 1.5 2.0 3.0 5.0 10
4000
5.6
400
M
Manual focus
indicator
Manual focus
mode icon
Focus distance
(white line)
5
1.0 1.5 2.0 3.0 5.0
Depth of eld
(blue bar)
R Use the I FOCUS RING option in the setup menu (P 109) to reverse the direction of rotation of the focus ring.
R To use autofocus to focus on the subject in the selected focus area (P 72), press the AF-L button (the size of the
focus area can be chosen with the command dial). In manual focus mode, you can use this feature to quickly
focus on a chosen subject using either single or continuous AF according to the option chosen for G AUTO-
FOCUS SETTING> INSTANT AF SETTING (P 90).
69
More on Photography and Playback
Focus Mode
R The camera can show focus distance in meters or feet. Use the A SCREEN SET-UP > FOCUS SCALE UNITS
option in the setup menu (P 108) to choose the units used.
R If ON is selected for G AUTOFOCUS SETTING> PRE-AF in the shooting menu (P 92), focus will be adjusted
continuously in modes S and C even when the shutter button is not pressed.
■ The Focus Indicator
The focus indicator turns green when the subject is in focus and blinks white when
the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing
and are displayed continuously in mode C while the shutter button is pressed half-
way. j is displayed in manual focus mode.
4000
5.6
400
P
Focus indicator
Checking Focus
Checking Focus
To zoom in on the current focus area (P 72) for precise focus, press
the center of the command dial. Press again to cancel zoom. In
manual focus mode, zoom can be adjusted by rotating the com-
mand dial when STANDARD or FOCUS PEAK HIGHLIGHT is se-
lected for c MF ASSIST, while if ON is selected for A SCREEN
SET-UP> FOCUS CHECK, the camera will automatically zoom in
on the selected focus area when the focus ring is rotated. Focus zoom is not available in focus mode C or when
G AUTOFOCUS SETTING> PRE-AF is on or an option other than r SINGLE POINT is selected for G AUTO-
FOCUS SETTING > AF MODE.
M M
70
Focus Mode
■ MF Assist
The c MF ASSIST option in the setup menu can be used to check focus when pictures are framed in
the LCD monitor or electronic view nder in manual focus mode.
R The c MF ASSIST menu can be displayed by pressing and holding the center of the command dial.
The following options are available:
• FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines. Rotate the focus ring until
the subject is highlighted.
• DIGITAL SPLIT IMAGE: Displays a split, black-and-white image in the center of the
frame. Frame the subject in the split-image area and rotate the focus ring until
the three parts of the split image are correctly aligned.
71
More on Photography and Playback
Focus Mode
Autofocus Options (AF Mode)
Autofocus Options (AF Mode)
To choose the AF mode for focus modes S and C, press the function
button (Fn3) to display the options shown below, then press the selec-
tor up or down to highlight an option and press MENU/OK to select.
• r SINGLE POINT: The camera focuses on the subject in the select-
ed focus point. Use for pin-point focus on a selected subject.
• y ZONE: The camera focuses on the subject in the selected focus
zone. Focus zones include multiple focus points (5 × 3, 5 × 5, or 3 × 3), making it easier to focus on
subjects that are in motion.
• z WIDE/TRACKING: In focus mode C, the camera tracks focus on the subject in the selected focus
point while the shutter button is pressed halfway. In focus mode S, the camera automatically focuses
on high-contrast subjects; the areas in focus are shown in the display. The camera may be unable to
focus on small objects or subjects that are moving rapidly.
R AF mode options can also be accessed using the G AUTOFOCUS SETTING option in the shooting menu
(P 90).
72
Focus Mode
Focus-Point Selection
Focus-Point Selection
Choose a focus point for autofocus. The procedure for selecting the
focus point varies with the option chosen for AF mode (P 71).
R Focus-area selection can also be accessed using the G AUTOFOCUS
SETTING option in the shooting menu (P 90).
R Focus-area selection can also be used to choose the focus point for man-
ual focus and focus zoom.
■ Single Point AF
Press the function button (Fn6) to display the focus points (“+”) and
focus frame. Use the selector to position the focus frame over the de-
sired focus point, or press DISP/BACK to return to the center point.
Focus frame
Focus point
To choose the size of the focus frame, rotate the command dial. Rotate
the dial left to reduce the frame by up to 50%, right to enlarge it by up
to 150%, or press the center of the dial to restore the frame to its origi-
nal size. Press MENU/OK to put your selection into e ect.
73
More on Photography and Playback
Focus Mode
■ Zone AF
Press the function button (Fn6) to display the focus zone. Use the se-
lector to position the zone or press DISP/BACK to return the zone to the
center of the display.
Focus zone
To choose the number of focus frames in the zone, rotate the com-
mand dial. Rotate the dial right to cycle through zone sizes in the or-
der 5 × 5, 3 × 3, 5 × 3, 5 × 5…, left to cycle through zone sizes in reverse
order, or press the center of the dial to select a zone size of 5 × 3. Press
MENU/OK to put your selection into e ect.
74
Focus Mode
■ Tracking (Focus Mode C Only)
Press the function button (Fn6) to display the focus frame. Use the
selector to position the focus frame, or press DISP/BACK to return the
frame to the center of the display. Press MENU/OK to put your selection
into e ect. The camera will track focus on the subject while the shutter
button is pressed halfway.
Focus frame
Q Manual focus-frame selection is not available when wide/tracking is selected in focus mode S.
Burst Mode Focus-Frame Selection
Burst Mode Focus-Frame Selection
During high-speed burst photography (J), the number of focus frames available in focus mode C drops and the
maximum zone size is restricted to 5 × 3.
Single point Zone Wide/Tracking
75
More on Photography and Playback
Sensitivity
Sensitivity
“Sensitivity” refers to the camera’s sensitivity to light. Choose from values between 200 and 6400, or se-
lect low-gain (L (100)) or high-gain (H (12800), H (25600), or H (51200)) options for special situations.
Higher values can be used to reduce blur when lighting is poor, while lower values allow slower shut-
ter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken
at high sensitivities, particularly at higher gains, while choosing the low-gain option reduces dynamic
range. Values of from ISO 200 to ISO 6400 are recommended in most situations. If AUTO1, AUTO2, or
AUTO3 is selected, the camera will adjust sensitivity automatically in response to shooting conditions.
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight N ISO and press MENU/OK.
2
Press the selector up or down to highlight the desired option and press MENU/OK to select.
R Sensitivity is not reset when the camera is turned o .
R The low-gain option reset to ISO 200 and the high-gain options to ISO 6400 when RAW, FINE+RAW, or
NORMAL+RAW is selected for image quality (P 93). For more information on the settings available with low-
and high-gain options, see page 151.
76
Sensitivity
■ AUTO
The following options are available when AUTO1, AUTO2, or AUTO3 is selected:
Option
Option
Default
Default
DEFAULT SENSITIVITY
200
200
MAX. SENSITIVITY
800 (
800 (
AUTO1
AUTO1
)
)
1600 (
1600 (
AUTO2
AUTO2
)
)
3200 (
3200 (
AUTO3
AUTO3
)
)
MIN. SHUTTER SPEED
1/60
1/60
The camera automatically chooses a sensitivity between the default and maximum values. Sensitiv-
ity is only raised above the default value if the shutter speed required for optimal exposure would be
slower than the value selected for MIN. SHUTTER SPEED.
R If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT
SENSITIVITY will be set to the value selected for MAX. SENSITIVITY.
R The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underex-
posed at the value selected for MAX. SENSITIVITY.
77
More on Photography and Playback
Recording Pictures in RAW Format
Recording Pictures in RAW Format
To record raw, unprocessed data from the camera image sensor, select a RAW option for image qual-
ity in the shooting menu as described below.
JPEG copies of RAW images can be created using the
j RAW CONVERSION option in the playback menu, or RAW images can be viewed on a computer
using the RAW FILE CONVERTER application
(P 118).
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight T IMAGE QUALITY and press MENU/OK.
2
Highlight an option and press MENU/OK. Select RAW to record only RAW images, or FINE+RAW or
NORMAL+RAW to record both JPEG copy together with the RAW images. FINE+RAW uses lower
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG
compression ratios to increase the number of images that can be stored.
The Function Button
The Function Button
To toggle RAW image quality on or o for a single shot, assign RAW to a function button (P 45). If a JPEG option
is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option.
If a JPEG+RAW option is currently selected, pressing the button temporarily selects the equivalent JPEG option,
while if RAW is selected, pressing the button temporarily selects FINE. Taking a picture or pressing the button
again restores the previous setting.
R Low- and high-gain ISO sensitivities are not available when RAW image quality is on (P 75).
78
Recording Pictures in RAW Format
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using di erent options for the settings listed below. The original image data
are una ected, allowing a single RAW image to be processed in a multitude of di erent ways.
1
Press MENU/OK during playback to display the
playback menu, then press the selector up
or down to highlight j RAW CONVERSION
and press MENU/OK to display the settings list-
ed in the table at right.
R These options can also be displayed by pressing
Q button during playback.
2
Press the selector up or
down to highlight a setting
and press the selector right
to select. Press the selec-
tor up or down to highlight
the desired option and press MENU/OK to select
and return to the settings list. Repeat this step
to adjust additional settings.
3
Press the Q button to preview the JPEG copy
and press MENU/OK to save.
Setting
Setting
Description
Description
REFLECT SHOOTING
COND.
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING
Adjust exposure by –1 EV to +3 EV in incre-
ments of
/
EV (P 55).
DYNAMIC RANGE
Enhance details in highlights for natural
contrast (P 93).
FILM SIMULATION
Simulate the e ects of di erent types of lm
(P 59).
WHITE BALANCE
Adjust white balance (P 82).
WB SHIFT
Fine-tune white balance (P 82).
COLOR
Adjust color density (P 94).
SHARPNESS
Sharpen or soften outlines (P 94).
HIGHLIGHT TONE
Adjust highlights (P 94).
SHADOW TONE
Adjust shadows (P 94).
NOISE REDUCTION
Process the copy to reduce mottling (P 94).
LENS MODULATION
OPTIMIZER
Improve de nition by adjusting for di rac-
tion and the slight loss of focus at the pe-
riphery of the lens (P 94).
COLOR SPACE
Choose the color space used for color repro-
duction (P 111).
CREATE
REFLECT SHOOTING COND.
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
WB SHIFT
RAW CONVERSION
CANCEL
79
More on Photography and Playback
Using the Self-Timer
Using the Self-Timer
Use the timer for self-portraits or to prevent blur caused by camera shake.
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight B SELF-TIMER and press MENU/OK.
2
Press the selector up or down to highlight one of the following options and press MENU/OK to select.
Option
Option
Description
Description
R
R
2 SEC
2 SEC
The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera
moving when the shutter button is pressed.
S
S
10 SEC
10 SEC
The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish
to appear yourself.
OFF
OFF Self-timer o .
3
Press the shutter button halfway to focus.
Q Stand behind the camera when using the shutter button. Standing in front of the lens can interfere with
focus and exposure.
80
Using the Self-Timer
4
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
9
9
The self-timer lamp on the front of the camera will blink immediately
before the picture is taken. If the two-second timer is selected, the
self-timer lamp will blink as the timer counts down.
R The self-timer turns o automatically when the camera is turned o .
81
More on Photography and Playback
Interval Timer Photography
Interval Timer Photography
Follow the steps below to con gure the camera to take photos automatically at a preset interval.
1
Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight o INTERVAL TIMER SHOOTING and press MENU/OK.
2
Use the selector to choose the interval and number of shots. Press MENU/OK to
proceed.
INTERVAL/NUMBER OF TIMES
INTERVAL NUMBER OF TIMES
END CANCEL
001
2
1
24
23
0
01 00
hms
3
Use the selector to choose the starting time and then press MENU/OK. Shooting
will start automatically.
START WAITING TIME
ESTIMATED START TIME
11:00
PM
START CANCEL
LATERhm
2
1
24
23
0
00
Q Interval timer photography can not be used at a shutter speed of B (bulb) or during panorama or multiple
exposure photography. In burst mode, only one picture will be taken each time the shutter is released.
R Use of a tripod is recommended.
R Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and
CP-W126 DC coupler.
R The display turns o between shots and lights a few seconds before the next shot is taken. The display can be
activated at any time by pressing the shutter button all the way down.
82
White Balance
White Balance
For natural colors, select D WHITE BALANCE in the shooting menu to display the following options,
then use the selector to highlight an option that matches the light source and press MENU/OK. The
dialog shown at bottom right will be displayed; use the selector to ne-tune white balance or press
DISP/BACK to exit without ne-tuning.
Option
Option
Description
Description
AUTO
AUTO White balance adjusted automatically.
h
h Measure a value for white balance (P 83).
k
k
Selecting this option displays a list of color
temperatures (P 83); highlight a tempera-
ture and press MENU/OK to select the high-
lighted option and display the ne-tuning
dialog.
i
i
For subjects in direct sunlight.
Option
Option
Description
Description
j
j
For subjects in the shade.
k
k
Use under “daylight” uorescent lights.
l
l
Use under “warm white” uorescent lights.
m
m
Use under “cool white” uorescent lights.
n
n
Use under incandescent lighting.
g
g
Reduces the blue cast typically associated
with underwater lighting.
R:0 B:0
WB SHIFT AUTO
SET
R White balance is adjusted for ash lighting only in AUTO and g modes. Turn the ash o using other white
balance options.
R Results vary with shooting conditions. Play pictures back after shooting to check colors.
83
More on Photography and Playback
White Balance
h
h
: Custom White Balance
: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will
be displayed; frame a white object so that it lls the display and press the shutter button all the way down to
measure white balance (to select the most recent custom value and exit without measuring white balance,
press DISP/BACK, or press MENU/OK to select the most recent value and display the ne-tuning dialog).
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (
P 55) and try again.
• If “OVER” is displayed, lower exposure compensation (P 55) and try again.
k
k
: Color Temperature
: Color Temperature
Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources
with a color temperature close to that of direct sunlight appear white; light sources with a lower color tempera-
ture have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match
color temperature to the light source as shown in the following table, or choose options that di er sharply from
the color of the light source to make pictures “warmer” or “colder.”
Choose for redder light sources
or “colder” pictures
Choose for bluer light sources
or “warmer” pictures
2,000 K
Candlelight
5,000 K
Direct sunlight
15,000 K
Blue sky
Sunset/sunrise Shade
84
Saving Settings
Saving Settings
Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can
be recalled using the u SELECT CUSTOM SETTING option in the shooting menu.
1
Press MENU/OK in shooting mode to display the shooting menu. Press the se-
lector up or down to highlight K EDIT/SAVE CUSTOM SETTING and press
MENU/OK.
P
SHOOTING MENU
EDIT/SAVE CUSTOM SETTING
OFF
35
mm
OFF
50
mm
ON
ON
0
O
CUSTOM
1
CUSTOM
2
CUSTOM
3
CUSTOM
4
CUSTOM
5
CUSTOM
6
CUSTOM
7
2
Highlight a custom settings bank and press MENU/OK to select. Adjust the fol-
lowing as desired and press DISP/BACK when adjustments are complete: N ISO,
U DYNAMIC RANGE, P FILM SIMULATION, D WHITE BALANCE, f COLOR,
q SHARPNESS, r HIGHLIGHT TONE, s SHADOW TONE, and h NOISE RE-
DUCTION.
EXIT
SAVE CURRENT SETTINGS
DYNAMIC RANGE
FILM SIMULATION
WHITE BALANCE
COLOR
CUSTOM
1
AUTO
0
ISO
200
R To replace the settings in the selected bank with the settings currently selected with the camera, select
K SAVE CURRENT SETTINGS and press MENU/OK.
3
A con rmation dialog will be displayed; highlight OK and press MENU/OK.
OK
CUSTOM
1
SET OK?
CANCEL
OK
SAVE CUSTOM SETTING
85
More on Photography and Playback
Using a Mount Adapter
Using a Mount Adapter
When M-mount lenses are attached using an optional FUJIFILM M MOUNT ADAPTER, the camera processes
pictures as they are taken to maintain image quality and correct for a variety of e ects.
R Attaching a mount adapter enables m SHOOT WITHOUT LENS (P 95) and hides the distance indicator in the
standard display.
R Before checking focus, set the focus mode selector to M (P 68).
Mount Adapter Settings
Mount Adapter Settings
Pressing the function button
on the mount adapter displays
l MOUNT ADAPTOR SET-
TING options.
SET
LENS
1
LENS
2
LENS
3
LENS
4
LENS
5
LENS
6
21
mm
24
mm
28
mm
35
mm
50
mm
75
mm
MOUNT ADAPTOR SETTING
■ Choosing a Focal Length
If the lens has a focal length of
21, 24, 28, or 35 mm, choose
a matching option in the
l MOUNT ADAPTOR SET-
TING menu. For other lenses,
select option 5 or 6 and use the selector to enter
the focal length.
■ Distortion Correction
Choose from STRONG, MEDI-
UM, or WEAK options to cor-
rect BARREL or PINCUSHION
distortion.
CANCEL
BARREL STRONG
BARREL MEDIUM
BARREL WEAK
OFF
PINCUSHION WEAK
PINCUSHION MEDIUM
LENS
5
DISTORTION CORRECTION
SET
Barrel distortion Pincushion distortion
R To determine the amount required, adjust distor-
tion correction while taking photos of graph paper
or other objects featuring repeating vertical and
horizontal lines, such as the windows in a high-rise.
0
2
1
9
8
50mm
LENS
5
CANCELSET
INPUT FOCAL LENGTH
86
Using a Mount Adapter
■ Color Shading Correction
Color (shading) variations be-
tween the center and edges
of the frame can be adjusted
separately for each corner.
SETNEXT
To use color shading correction, follow the steps
below.
1
Rotate the command dial to choose
a corner. The selected corner is indi-
cated by a triangle.
2
Use the selector to adjust shading
until there is no visible di erence in
color between the selected corner
and the center of the image. Press the selector
left or right to adjust colors on the cyan–red
axis, up or down to adjust colors on the blue–
yellow axis. There are a total of 19 positions
available on each axis.
R To determine the amount required, adjust color
shading correction while taking photos of blue sky
or a sheet of gray paper.
■ Peripheral Illumination Correction
Choose from values between
–5 and +5. Choosing positive
values increases peripheral il-
lumination, while choosing
negative values reduces pe-
ripheral illumination. Positive values are recom-
mended for vintage lenses, negative values to
create the e ect of images taken with an antique
lens or a pinhole camera.
R To determine the amount required, adjust periph-
eral illumination correction while taking photos of
blue sky or a sheet of gray paper.
0
CANCELSET
87
More on Photography and Playback
PhotoBook Assist
PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select NEW BOOK for m PHOTOBOOK AS-
SIST in the playback menu (P 103) and choose
from the following options:
• SELECT FROM ALL: Choose from all available
pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures
matching selected search conditions (P
89).
R Neither photographs a or smaller nor movies
can be selected for photobooks.
2
Scroll through the images and press the se-
lector up to select or deselect. To display the
current image on the cover, press the selector
down. Press MENU/OK to exit when the book is
complete.
R The rst picture selected becomes the cover im-
age. Press the selector down to select a di erent
image for the cover.
3
Highlight COMPLETE PHOTOBOOK and
press MENU/OK (to select all photos or all pho-
tos matching the speci ed search conditions
for the book, choose SELECT ALL). The new
book will be added to the list in the photo-
book assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically de-
leted.
88
PhotoBook Assist
Viewing Photobooks
Viewing Photobooks
Highlight a book in the photobook assist menu
and press MENU/OK to display the book, then press
the selector left or right to scroll through the pic-
tures.
Editing and Deleting Photobooks
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The
following options will be displayed; select the
desired option and follow the on-screen instruc-
tions.
• EDIT: Edit the book as described in “Creating a
PhotoBook” (P 87).
• ERASE: Delete the book.
Photobooks
Photobooks
Photobooks can be copied to a computer using MyFinePix Studio software (P 118).
89
More on Photography and Playback
Image Search
Image Search
Follow the steps below to search for pictures.
1
Press MENU/OK during playback to display the playback menu. Press the selector up or down to highlight
b IMAGE SEARCH and press MENU/OK.
2 Highlight an option and press MENU/OK.
Option
Option
Description
Description
BY DATE Search by date.
BY FACE Search for pictures that include faces.
BY I FAVORITES Search by rating (P 31).
BY SCENE Search by scene.
BY TYPE OF DATA Find all still pictures, all movies, or all RAW pictures.
BY UPLOAD MARK Find all pictures selected for upload to a speci ed destination.
3
Select a search condition. Only pictures that match the search condition will
be displayed. To delete or protect selected pictures or to view the selected
pictures in a slide show, press MENU/OK and choose from the options at right.
4 To end the search, select EXIT SEARCH.
Option
Option
See page
See page
A
A
ERASE
ERASE
99
99
D
D
PROTECT
PROTECT
101
101
I
I
SLIDE SHOW
SLIDE SHOW
102
102
90
Menus
Menus
Using the Menus: Shooting Mode
Using the Menus: Shooting Mode
The shooting menu is used to adjust settings for a wide range of shooting condi-
tions. To display the shooting menu, press MENU/OK in shooting mode. Highlight
items and press the selector right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings are complete.
EXIT
SHOOTING MENU
ISO
AUTOFOCUS SETTING
PROGRAM AE
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE AUTO
FILM SIMULATION
F
200
3:2
P
Shooting Menu Options (Photographs)
Shooting Menu Options (Photographs)
R The options available vary with the shooting mode selected.
d
d
ADVANCED FILTER
ADVANCED FILTER
Choose a lter (P 67).
R This option is only available when Y ADVANCED FILTER is selected for drive mode.
A
A
SCENE POSITION
SCENE POSITION
Choose a scene for auto mode (P 51).
R This option is only available when auto mode has been selected by pressing a function button (by default, Fn2/AUTO).
G
G
AUTOFOCUS SETTING
AUTOFOCUS SETTING
Adjust autofocus settings.
Option
Option
Description
Description
FOCUS AREA
FOCUS AREA
Choose the focus area (P 72).
AF MODE
AF MODE Choose the AF mode for focus modes S and C (P 71).
RELEASE/FOCUS
RELEASE/FOCUS
PRIORITY
PRIORITY
Choose how the camera focuses in focus mode AF-S or AF-C.
• RELEASE: Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus.
• FOCUS: Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus.
INSTANT AF SETTING
INSTANT AF SETTING Choose how the camera focuses when the AF-L button is pressed in manual focus mode (P 68).
91
Menus
Using the Menus: Shooting Mode
G
G
AUTOFOCUS SETTING (Continued)
AUTOFOCUS SETTING (Continued)
Option
Option
Description
Description
AF+MF
AF+MF
If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the
shutter button is pressed halfway. Both standard and focus peaking MF assist options are supported (P 70,
95). Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can
be used. Selecting MF disables the focus distance indicator. Set the focus ring to the center of the focus
distance indicator, as the camera may fail to focus if the ring is set to in nity or the minimum focus distance.
AF + MF Focus Zoom
AF + MF Focus Zoom
When
When
ON
ON
is selected for
is selected for
A
A
SCREEN SET-UP
SCREEN SET-UP
>
>
FOCUS CHECK
FOCUS CHECK
in the setup menu and
in the setup menu and
SINGLE POINT
SINGLE POINT
selected for
selected for
AF MODE
AF MODE
, focus zoom can be used to zoom in on the selected focus area. Focus zoom is
, focus zoom can be used to zoom in on the selected focus area. Focus zoom is
not available when
not available when
ZONE
ZONE
or
or
WIDE/TRACKING
WIDE/TRACKING
is selected for
is selected for
AF MODE
AF MODE
. The zoom ratio is the same as
. The zoom ratio is the same as
that selected in manual focus mode (from 2.5× to 6×) and can not be changed.
that selected in manual focus mode (from 2.5× to 6×) and can not be changed.
FACE DETECTION
FACE DETECTION
Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the
camera from focusing on the background in group portraits. Choose for shots that emphasize portrait
subjects.
To use Intelligent Face Detection, press MENU/OK to display the shooting menu and
select ON for FACE DETECTION. Faces can be detected with the camera in vertical
or horizontal orientation; if a face is detected, it will be indicated by a green border.
If there is more than one face in the frame, the camera will select the face closest to
the center; other faces are indicated by white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather
than the portrait subject.
Q If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the
green border when the picture is taken.
92
Using the Menus: Shooting Mode
G
G
AUTOFOCUS SETTING (Continued)
AUTOFOCUS SETTING (Continued)
Option
Option
Description
Description
EYE DETECTION AF
EYE DETECTION AF
Choose whether the camera detects and focuses on eyes when Intelligent Face
Detection is on. Choose from uAUTO (the camera automatically chooses which
eye to focus on), w RIGHT EYE PRIORITY (the camera focuses on the right eye),
v LEFT EYE PRIORITY (the camera focuses on the left eye), and OFF (eye focus
o ).
R If the camera is unable to detect the subject’s eyes because they are hidden by
hair, glasses, or other objects, the camera will instead focus on faces.
PRE-AF
PRE-AF
If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed
halfway. Note that this increases the drain on the battery.
AF ILLUMINATOR
AF ILLUMINATOR
If ON is selected, the AF-assist illuminator will light to assist autofocus.
R The AF-assist illuminator turns o automatically when OFF is selected for o SOUND & FLASH in the
setup menu.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is un-
able to focus in macro mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.
N
N
ISO
ISO
Control the camera’s sensitivity to light (P 75).
93
Menus
Using the Menus: Shooting Mode
O
O
IMAGE SIZE
IMAGE SIZE
Choose the size and aspect ratio at which still pictures are recorded.
Aspect Ratio
Aspect Ratio
Pictures with an aspect ratio of 3 : 2 have the same proportions as
Pictures with an aspect ratio of 3 : 2 have the same proportions as
a frame of 35 mm lm, while an aspect ratio of 16 : 9 is suited to
a frame of 35 mm lm, while an aspect ratio of 16 : 9 is suited to
display on
display on
H
H
igh
igh
D
D
e nition (HD) devices. Pictures with an aspect
e nition (HD) devices. Pictures with an aspect
ratio of 1 : 1 are square.
ratio of 1 : 1 are square.
O IMAGE SIZE is not reset when the camera is turned o or an-
other shooting mode is selected.
Option
Option
Prints at sizes up to
Prints at sizes up to
Option
Option
Prints at sizes up to
Prints at sizes up to
O
O
3 : 2
3 : 2
41 × 28 cm (16 × 11 in.)
Q
Q
3 : 2
3 : 2
21 × 14 cm (8 × 5 in.)
O
O
16 : 9
16 : 9
41 × 23 cm (16 × 9 in.)
Q
Q
16 : 9
16 : 9
21 × 12 cm (8 × 4 in.)
O
O
1 : 1
1 : 1
28 × 28 cm (11 × 11 in.)
Q
Q
1 : 1
1 : 1
14 × 14 cm (5 × 5 in.)
P
P
3 : 2
3 : 2
29 × 20 cm (11 × 7 in.)
P
P
16 : 9
16 : 9
29 × 16 cm (11 × 6 in.)
P
P
1 : 1
1 : 1
20 × 20 cm (7 × 7 in.)
T
T
IMAGE QUALITY
IMAGE QUALITY
Choose a le format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or
FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios
for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the num-
ber of images that can be stored.
U
U
DYNAMIC RANGE
DYNAMIC RANGE
Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to
reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended
for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn
leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may
appear in pictures taken at higher values.
R If AUTO is selected, the camera will automatically choose either
V
V 100% or
W
W 200% according to the subject and shoot-
ing conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway.
R
R
W
W 200% is available at sensitivities of ISO 400 and above,
X
X 400% at sensitivities of ISO 800 and above.
P
P
FILM SIMULATION
FILM SIMULATION
Simulate the e ects of di erent types of lm (P 59).
B
B
SELF-TIMER
SELF-TIMER
Take pictures with the self-timer (P 79).
94
Using the Menus: Shooting Mode
o
o
INTERVAL TIMER SHOOTING
INTERVAL TIMER SHOOTING
Adjust settings for interval timer photography (P 81).
D
D
WHITE BALANCE
WHITE BALANCE
Adjust colors to match the light source (P 82).
f
f
COLOR
COLOR
Adjust color density.
q
q
SHARPNESS
SHARPNESS
Sharpen or soften outlines.
r
r
HIGHLIGHT TONE
HIGHLIGHT TONE
Adjust the appearance of highlights.
s
s
SHADOW TONE
SHADOW TONE
Adjust the appearance of shadows.
h
h
NOISE REDUCTION
NOISE REDUCTION
Reduce noise in pictures taken at high sensitivities.
K
K
LONG EXPOSURE NR
LONG EXPOSURE NR
Select ON to reduce mottling in long time-exposures (P 53).
j
j
LENS MODULATION OPTIMIZER
LENS MODULATION OPTIMIZER
Select ON to improve de nition by adjusting for di raction and the slight loss of focus at the periphery of the lens.
u
u
SELECT CUSTOM SETTING
SELECT CUSTOM SETTING
Recall settings saved with K EDIT/SAVE CUSTOM SETTING.
K
K
EDIT/SAVE CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
Save settings (P 84).
95
Menus
Using the Menus: Shooting Mode
l
l
MOUNT ADAPTOR SETTING
MOUNT ADAPTOR SETTING
Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER (P 85).
m
m
SHOOT WITHOUT LENS
SHOOT WITHOUT LENS
Choose whether shutter release is enabled when no lens is attached.
c
c
MF ASSIST
MF ASSIST
Choose how focus is displayed in manual focus mode (P 70).
• STANDARD: Focus is displayed normally (focus peaking and digital split image are not available).
• DIGITAL SPLIT IMAGE: A black-and-white split-image display.
• FOCUS PEAK HIGHLIGHT: The camera heightens high-contrast outlines. Choose a color and peaking level.
v
v
AE/AF-LOCK MODE
AE/AF-LOCK MODE
If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AE-L or AF-L button is pressed. If AE & AF
ON/OFF SWITCH is selected, exposure and/or focus will lock when the AE-L or AF-L button is pressed and remain locked until
the button is pressed again.
d
d
AF-LOCK BUTTON
AF-LOCK BUTTON
Choose the role played by the AF-L button (P 56).
C
C
PHOTOMETRY
PHOTOMETRY
Choose how the camera meters exposure when Intelligent Face Detection is o (P 58).
v
v
INTERLOCK SPOT AE & FOCUS AREA
INTERLOCK SPOT AE & FOCUS AREA
Select ON to meter the current focus frame when SINGLE POINT is selected for AUTOFOCUS SETTING> AF MODE and SPOT
is selected for PHOTOMETRY.
96
Using the Menus: Shooting Mode
p
p
FLASH SET-UP
FLASH SET-UP
Adjust ash settings.
Option
Option
Description
Description
FLASH MODE
FLASH MODE
Choose a ash mode (
P 36).
FLASH COMPENSATION
FLASH COMPENSATION
Adjust ash brightness. Choose from values between +2 EV and –2 EV. Note that the desired results may
not be achieved depending on shooting conditions and the distance to the subject.
RED EYE REMOVAL
RED EYE REMOVAL
Choose ON to remove red-eye e ects caused by the ash.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
W
W
MOVIE SET-UP
MOVIE SET-UP
Adjust movie settings (P 38).
Option
Option
Description
Description
MOVIE MODE
MOVIE MODE
Select a frame size and rate for movie recording.
• i 1920×1080 60 fps: Full HD (60 fps)
• i 1920×1080 50 fps: Full HD (50 fps)
• i 1920×1080 30 fps: Full HD (30 fps)
• i 1920×1080 25 fps: Full HD (25 fps)
• i 1920×1080 24 fps: Full HD (24 fps)
• h 1280×720 60 fps: HD (60 fps)
• h 1280×720 50 fps: HD (50 fps)
• h 1280×720 30 fps: HD (30 fps)
• h 1280×720 25 fps: HD (25 fps)
• h 1280×720 24 fps: HD (24 fps)
MOVIE ISO
MOVIE ISO
Choose the sensitivity for movie recording from AUTO or from settings between ISO 400 and 6400.
R This setting has no e ect on photographs.
MIC LEVEL ADJUSTMENT
MIC LEVEL ADJUSTMENT Adjust the microphone recording level.
MIC/REMOTE RELEASE
MIC/REMOTE RELEASE
Specify whether the device connected to the microphone/remote release connector is a microphone or
a remote release (P 39, 54).
97
Menus
Using the Menus: Shooting Mode
X
X
FILM SIMULATION BKT
FILM SIMULATION BKT
Choose lm types for lm simulation bracketing (P 62).
L
L
IS MODE
IS MODE
Choose from the following image stabilization options:
Option
Option
Description
Description
L
L
CONTINUOUS + MOTION
CONTINUOUS + MOTION
Image stabilization on. If + MOTION is selected, the camera will adjust shutter speed to reduce
motion blur when a moving objects are detected.
l
l
CONTINUOUS
CONTINUOUS
M
M
SHOOTING + MOTION
SHOOTING + MOTION
As above, except that image stabilization is performed only when the shutter button is pressed
halfway or the shutter is released.
m
m
SHOOTING ONLY
SHOOTING ONLY
OFF
OFF Image stabilization o . Choose this option when using a tripod.
R + MOTION has no e ect when sensitivity is set to a xed value, and may also be unavailable at some other combinations of
settings. The e ect may vary with lighting conditions and the speed at which the object is moving.
R IS mode is available only when lens that supports image stabilization is attached.
r
r
WIRELESS COMMUNICATION
WIRELESS COMMUNICATION
Connect to a smartphone or tablet over a wireless network (P 117).
R For more information, visit http://fujifilm-dsc.com/wifi/.
e
e
APERTURE SETTING
APERTURE SETTING
Choose the method used to adjust aperture when using lenses with no aperture rings.
• AUTO + o MANUAL: Rotate the command dial to choose the aperture. Rotate past minimum aperture to choose A (auto).
• AUTO: Aperture is selected automatically; camera functions in exposure mode P (program AE) or S (shutter-priority AE).
• MANUAL: Rotate the command dial to choose the aperture; camera functions in exposure mode A (aperture-priority AE) or M
(manual).
R Aperture can not be adjusted while the view through the camera lens is zoomed in.
98
Using the Menus: Shooting Mode
x
x
SHUTTER TYPE
SHUTTER TYPE
Choose the shutter type. Choose the electronic shutter to mute the shutter sound.
Option
Option
Description
Description
t
t
MECHANICAL SHUTTER
MECHANICAL SHUTTER
Take pictures with the mechanical shutter.
s
s
ELECTRONIC SHUTTER
ELECTRONIC SHUTTER
Take pictures with the electronic shutter.
t
t
MECHANICAL +
MECHANICAL +
s
s
ELECTRONIC
ELECTRONIC
The camera chooses the shutter type according to shooting conditions.
R If s ELECTRONIC SHUTTER or t MECHANICAL + s ELECTRONIC is selected, shutter speeds faster than
/
s can be
chosen by rotating the shutter speed dial to 4000 and then rotating the command dial.
R For information on the role of the command dial when the camera is used with lenses not equipped with an aperture ring,
see “Lenses with No Aperture Rings” (P 11).
R Regardless of the option selected, the mechanical shutter is used for motion panoramas. When the electronic shutter is used,
shutter speed and sensitivity are restricted to values of
/
–1s and ISO 6400–200 respectively, and long exposure noise
reduction has no e ect. In burst mode, focus and exposure are xed at the values for the rst shot in each burst.
Q Distortion may be visible in shots of moving subjects with electronic shutter, while banding and fog may occur in shots taken
under uorescent lights or other ickering or erratic illumination. When taking pictures with the shutter muted, respect your
subjects’ image rights and right to privacy.
99
Menus
Using the Menus: Playback Mode
Using the Menus: Playback Mode
To display the playback menu, press MENU/OK in playback mode. Highlight items
and press the selector right to view options, then highlight an option and press
MENU/OK. Press DISP/BACK to exit when settings are complete.
RAW CONVERSION
PLAYBACK MENU
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
EXIT
WIRELESS COMMUNICATION
Playback Menu Options
Playback Menu Options
r
r
WIRELESS COMMUNICATION
WIRELESS COMMUNICATION
Connect to a smartphone or tablet over a wireless network (P 117).
R For more information, visit http://app.fujifilm-dsc.com.
j
j
RAW CONVERSION
RAW CONVERSION
Create JPEG copies of RAW pictures (P 78).
A
A
ERASE
ERASE
Delete all or selected pictures.
• FRAME: Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture (a con rmation
dialog is not displayed).
• SELECTED FRAMES: Highlight pictures and press MENU/OK to select or deselect. When the operation is complete, press DISP/BACK
to display a con rmation dialog, then highlight OK and press MENU/OK.
• ALL FRAMES: A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
100
Using the Menus: Playback Mode
G
G
CROP
CROP
Create a cropped copy of the current picture.
1
Display the desired picture.
2
Select G CROP in the playback menu.
3
Use the k and n buttons to zoom in and out and press the selector up, down, left, or right to scroll the picture until the
desired portion is displayed.
4
Press MENU/OK to display a con rmation dialog.
5
Press MENU/OK again to save the cropped copy to a separate le.
R Larger crops produce larger copies; all copies have an aspect ratio of 3 : 2. If the size of the nal copy will be a, OK will be
displayed in yellow.
e
e
RESIZE
RESIZE
Create a small copy of the current picture.
1
Display the desired picture.
2
Select e RESIZE in the playback menu.
3
Highlight a size and press MENU/OK to display a con rmation dialog.
4
Press MENU/OK again to save the resized copy to a separate le.
R The sizes available vary with the size of the original image.
101
Menus
Using the Menus: Playback Mode
D
D
PROTECT
PROTECT
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press
DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card is formatted (P 113).
C
C
IMAGE ROTATE
IMAGE ROTATE
Rotate pictures.
1
Display the desired picture.
2
Select C IMAGE ROTATE in the playback menu.
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.
4
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures.
R The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated
when viewed on a computer or on other cameras.
R Pictures taken with A SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during
playback (P 108).
102
Using the Menus: Playback Mode
B
B
RED EYE REMOVAL
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create
a copy with reduced red-eye.
1
Display the desired picture.
2
Select B RED EYE REMOVAL in the playback menu.
3
Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in pro le. Results may di er depending on
the scene. Red eye can not be removed from pictures that have already been processed using red-eye removal or pictures
created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
R Red eye removal can not be performed on RAW images.
I
I
SLIDE SHOW
SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACK at any time dur-
ing the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
Option
Option
Description
Description
NORMAL
NORMAL
Press the selector left or right to go back or skip ahead one frame. Select FADE-IN for fade transitions between
frames.
FADE-IN
FADE-IN
NORMAL
NORMAL
g
g
As above, except that camera automatically zooms in on faces.
FADE-IN
FADE-IN
g
g
MULTIPLE
MULTIPLE Display several pictures at once.
R The camera will not turn o automatically while a slide show is in progress.
103
Menus
Using the Menus: Playback Mode
m
m
PHOTOBOOK ASSIST
PHOTOBOOK ASSIST
Create books from your favorite photos (P 87).
j
j
MARK FOR UPLOAD TO
MARK FOR UPLOAD TO
Select pictures for upload to YouTube, Facebook or MyFinePix.com using MyFinePix Studio (Windows only).
1
Select YouTube to choose movies for upload to YouTube, Facebook to choose photos and movies for upload to Facebook,
or MyFinePix.com to choose photos for upload to MyFinePix.com.
2
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press DISP/BACK to exit when all the
desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R Only photos can be selected for upload to MyFinePix.com.
R During playback, selected pictures are indicated by j YouTube, j Facebook or j MyFinepix.com icons.
R Choose RESET ALL to deselect all pictures. If the number of pictures a ected is very large, some time may be required to
complete the operation. Press DISP/BACK to exit before the operation is complete.
Uploading Pictures (Windows Only)
Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the
Selected pictures can be uploaded using the
YouTube/Facebook/
YouTube/Facebook/
MyFinePix.com Upload
MyFinePix.com Upload
option in MyFinePix Studio. For information on
option in MyFinePix Studio. For information on
installing MyFinePix Studio and connecting the camera to a computer, see
installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer”(
“Viewing Pictures on a Computer”(
P
P
118
).
).
Select with camera
Upload from computer
b
b
IMAGE SEARCH
IMAGE SEARCH
Search for pictures (P 89).
104
Using the Menus: Playback Mode
s
s
PC AUTO SAVE
PC AUTO SAVE
Upload pictures to a computer over a wireless network (P 117).
R For more information, visit http://app.fujifilm-dsc.com.
K
K
PRINT ORDER (DPOF)
PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 123).
V
V
instax PRINTER PRINT
instax PRINTER PRINT
Print pictures on optional FUJIFILM instax SHARE printers (P 127).
J
J
DISP ASPECT
DISP ASPECT
Choose how High De nition (HD) devices display pictures with an aspect ratio of 3 : 2
(this option is available only when an HDMI cable is connected). Select 16 : 9 to display
the image so that it lls the screen with its top and bottom cropped out, 3 : 2 to display
the entire image with black bands at either side.
3:2
16:9
16 : 9
16 : 9
3 : 2
3 : 2
105
Menus
The Setup Menu
The Setup Menu
Using the Setup Menu
Using the Setup Menu
1
Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the selector left to highlight the tab for the current menu.
1.3 Press the selector down to highlight the setup menu tab containing the de-
sired option.
ON
EXIT
SET-UP
DATE/TIME
TIME DIFFERENCE
RESET
SOUND & FLASH
SOUND SET-UP
SCREEN SET-UP
ENGLISH
Tab
1.4 Press the selector right to place the cursor in the setup menu.
2
Adjust settings.
Highlight items and press the selector right to view options, then highlight an option and press
MENU/OK. Press DISP/BACK to exit when settings are complete.
106
The Setup Menu
Setup Menu Options
Setup Menu Options
F
F
DATE/TIME
DATE/TIME
Set the camera clock (P 22).
N
N
TIME DIFFERENCE
TIME DIFFERENCE
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the
di erence between local time and your home time zone:
1
Highlight g LOCAL and press MENU/OK.
2
Use the selector to choose the time di erence between local time and your home time zone. Press MENU/OK when settings
are complete.
To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time
zone, select h HOME. If g LOCAL is selected, g will be displayed for three seconds when the camera is turned on.
Q
Q
a
a
Choose a language (P 22).
R
R
RESET
RESET
Reset shooting or setup menu options to default values. Custom white balance, custom settings banks created using
K
K
EDIT/
SAVE CUSTOM SETTING,
r
r WIRELESS SETTINGS, and the setup menu F DATE/TIME, N TIME DIFFERENCE options are
not a ected.
1
Highlight the desired option and press the selector right.
2
A con rmation dialog will be displayed; highlight OK and press MENU/OK.
o
o
SOUND & FLASH
SOUND & FLASH
Select OFF to disable the speaker, ash, and illuminator in situations in which camera sounds or lights may be unwelcome.
oappears in the display when OFF is selected.
107
Menus
The Setup Menu
b
b
SOUND SET-UP
SOUND SET-UP
Adjust sound settings.
Option
Option
Description
Description
OPERATION VOL.
OPERATION VOL.
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.
SHUTTER VOLUME
SHUTTER VOLUME
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute) to
disable the shutter sound.
SHUTTER SOUND
SHUTTER SOUND Choose the sound made by the shutter.
PLAYBACK VOLUME
PLAYBACK VOLUME Adjust the volume for movie playback.
A
A
SCREEN SET-UP
SCREEN SET-UP
Adjust display settings.
Option
Option
Description
Description
IMAGE DISP.
IMAGE DISP.
Choose how long images are displayed after shooting. Colors may di er slightly from those in the nal
image and “noise” mottling may be visible at high sensitivities.
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Pictures are displayed until the MENU/OK button is pressed or the shutter button
is pressed halfway. To zoom in on the active focus point, press the center of the
command dial; press again to cancel zoom.
1.5 SEC
1.5 SEC
Pictures are displayed for 1.5 seconds (1.5 SEC) or 0.5 seconds (0.5 SEC) or until
the shutter button is pressed halfway.
0.5 SEC
0.5 SEC
OFF
OFF Pictures are not displayed after shooting.
EVF AUTOROTATE DISPLAYS
EVF AUTOROTATE DISPLAYS
Choose whether the indicators in the view nder rotate to match camera orientation (P 25). Regardless
of the option selected, the indicators in the monitor do not rotate.
PREVIEW EXP. IN MANUAL
PREVIEW EXP. IN MANUAL
MODE
MODE
Select ON to enable exposure preview in manual exposure mode. Select OFF when using the ash or
on other occasions on which exposure may change when the picture is taken.
108
The Setup Menu
A
A
SCREEN SET-UP (Continued)
SCREEN SET-UP (Continued)
Option
Option
Description
Description
EVF BRIGHTNESS
EVF BRIGHTNESS Adjust the brightness of the display in the electronic view nder.
LCD BRIGHTNESS
LCD BRIGHTNESS Adjust monitor brightness.
PREVIEW PIC. EFFECT
PREVIEW PIC. EFFECT
Choose ON to preview the e ects of lm simulation, white balance, and other settings in the monitor.
Choose OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more
visible.
R If OFF is selected, the e ects of camera settings will not be visible in the monitor and colors and
tone will di er from those in the nal picture. The display will however be adjusted to show the
e ects of advanced lters and of monochrome and sepia settings.
FRAMING GUIDELINE
FRAMING GUIDELINE
Choose the type of framing grid available in shooting mode.
F
F
GRID 9
GRID 9
G
G
GRID 24
GRID 24
H
H
HD FRAMING
HD FRAMING
P P P
For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop
shown by the lines at the top and
bottom of the display.
AUTOROTATE PB
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
FOCUS CHECK
FOCUS CHECK
If ON is selected, the camera will automatically zoom in on the view through the lens when the focus
ring is rotated in manual focus mode (P 69).
FOCUS SCALE UNITS
FOCUS SCALE UNITS
Choose the units used for the focus distance indicator (P 69).
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING Choose items for the standard display (P 27).
109
Menus
The Setup Menu
h
h
BUTTON/DIAL SETTING
BUTTON/DIAL SETTING
Choose the roles played by camera controls.
Option
Option
Description
Description
FUNCTION (Fn) SETTING
FUNCTION (Fn) SETTING Choose the roles played by the function buttons (P 45).
SELECTOR BUTTON SETTING
SELECTOR BUTTON SETTING
Choose the roles played by the up, down, left, and right buttons on the selector.
Option
Option
Description
Description
Fn BUTTON
Fn BUTTON The selector buttons serve as function buttons.
FOCUS AREA
FOCUS AREA The selector buttons can be used to position the focus area.
EDIT/SAVE QUICK MENU
EDIT/SAVE QUICK MENU
Choose the options displayed in the quick menu (P 43).
COMMAND DIAL SETTING
COMMAND DIAL SETTING
Choose whether the command dial controls shutter speed (S.S, the default option) or aperture (F).
R This option only takes e ect with lenses that are not equipped with an aperture ring.
AE-L/AF-L BUTTON SETTING
AE-L/AF-L BUTTON SETTING Switch the roles of the AF-L and AE-L buttons.
I
I
FOCUS RING
FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
Z
Z
POWER MANAGEMENT
POWER MANAGEMENT
Adjust power management settings.
Option
Option
Description
Description
AUTO POWER OFF
AUTO POWER OFF
Choose the length of time before the camera turns o automatically when no operations are performed.
Shorter times increase battery life; if OFF is selected, the camera must be turned o manually. Note that in
some situations the camera turns o automatically even when OFF is selected.
HIGH PERFORMANCE
HIGH PERFORMANCE Select ON for faster focus and to reduce the time needed to restart the camera after it has been turned o .
110
The Setup Menu
V
V
SENSOR CLEANING
SENSOR CLEANING
Remove dust from the camera image sensor.
• OK: Clean sensor immediately (P xi).
• WHEN SWITCHED ON: If this option is selected, sensor cleaning will be performed when the camera turns on.
• WHEN SWITCHED OFF: If this option is selected, sensor cleaning will be performed when the camera turns o (sensor cleaning is
not however performed if the camera turns o in playback mode).
R Dust that can not be removed using sensor cleaning can be removed manually (
P 134).
t
t
SAVE DATA SET-UP
SAVE DATA SET-UP
Adjust le management settings.
Option
Option
Description
Description
FRAME NO.
FRAME NO.
New pictures are stored in image les named using a four-digit le number assigned by
adding one to the last le number used. The le number is displayed during playback as
shown at right. FRAME NO. controls whether le numbering is reset to 0001 when a new
memory card is inserted or the current memory card is formatted.
Frame number
100-0001
Directory
number
File
number
Option
Option
Description
Description
CONTINUOUS
CONTINUOUS
Numbering continues from the last le number used or the rst available le number, whichever is
higher. Choose this option to reduce the number of pictures with duplicate le names.
RENEW
RENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 141).
R Selecting R RESET (P 106) sets FRAME NO. to CONTINUOUS but does not reset the le number.
R Frame numbers for pictures taken with other cameras may di er.
SAVE ORG IMAGE
SAVE ORG IMAGE
Choose ON to save unprocessed copies of pictures taken using
B
B RED EYE REMOVAL.
EDIT FILE NAME
EDIT FILE NAME
Change the le name pre x. sRGB images use a four-letter pre x (default “DSCF”), Adobe RGB images a three-
letter pre x (“DSF”) preceded by an underscore.
111
Menus
The Setup Menu
J
J
COLOR SPACE
COLOR SPACE
Choose the gamut of colors available for color reproduction.
Option
Option
Description
Description
sRGB
sRGB Recommended in most situations.
Adobe RGB
Adobe RGB For commercial printing.
u
u
EVF/LCD SETTING
EVF/LCD SETTING
Choose a display (P 24).
112
The Setup Menu
r
r
CONNECTION SETTING
CONNECTION SETTING
Adjust settings for connection to wireless devices, including smartphones, computers, and FUJIFILM instax SHARE printers.
Option
Option
Description
Description
WIRELESS
WIRELESS
SETTINGS
SETTINGS
Adjust settings for connection to wireless networks.
Option
Option
Description
Description
GENERAL SETTINGS
GENERAL SETTINGS
Choose a name (NAME) to identify the camera on the wireless network (the camera is as-
signed a unique name by default) or select RESET WIRELESS SETTINGS to restore default
settings.
RESIZE IMAGE FOR
RESIZE IMAGE FOR
SMARTPHONE
SMARTPHONE H
Choose ON (the default setting, recommended in most circumstances) to resize larger
images to H for upload to smartphones, OFF to upload images at their original size.
Resizing applies only to the copy uploaded to the smartphone; the original is not a ected.
PC AUTO SAVE
PC AUTO SAVE
SETTINGS
SETTINGS
Choose DELETE REGISTERED DESTINATION PC to remove selected destinations, DE-
TAILS OF PREVIOUS CONNECTION to view computers to which the camera has recently
connected.
PC AUTO SAVE
PC AUTO SAVE
SETTING
SETTING
Choose an upload destination. Choose SIMPLE SETUP to connect using WPS, MANUAL SETUP to con g-
ure network settings manually.
GEOTAGGING SET-UP
GEOTAGGING SET-UP
View location data downloaded from a smartphone and choose whether to save the data with your pic-
tures.
Option
Option
Description
Description
GEOTAGGING
GEOTAGGING
Choose whether location data downloaded from a smartphone are embedded in pictures
as they are taken.
LOCATION INFO
LOCATION INFO Display the location data last downloaded from a smartphone.
instax PRINTER
instax PRINTER
CONNECTION SETTING
CONNECTION SETTING
Adjust settings for connection to optional FUJIFILM instax SHARE printers (P 126).
R For more information on wireless connections, visit http://fujifilm-dsc.com/wifi/
113
Menus
The Setup Menu
K
K
FORMAT
FORMAT
To format the memory card:
1
Highlight K FORMAT in the setup menu and press MENU/OK.
2
A con rmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK.
To exit without formatting the memory card, select CANCEL or press DISP/BACK.
Q All data—including protected pictures—will be deleted from the memory card. Be sure important
les have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
SET
FORMAT
FORMAT OK?
ERASE ALL DATA
OK
CANCEL
114
Factory Defaults
Factory Defaults
The factory default settings for the options in the shooting and setup menus are listed below. These
settings can be restored using the R RESET option in the setup menu (P 106).
■ Shooting Menu
Menu
Menu
Default
Default
d ADVANCED FILTER G TOY CAMERA
A SCENE POSITION S ADVANCED SR AUTO
G AUTOFOCUS SETTING
AF MODE
y ZONE
RELEASE/FOCUS PRIORITY
RELEASE/FOCUS PRIORITY
• AF-S PRIORITY SELECTION: RELEASE
• AF-C PRIORITY SELECTION: RELEASE
INSTANT AF SETTING
INSTANT AF SETTING AF-S
AF+MF
AF+MF OFF
FACE DETECTION
FACE DETECTION OFF
EYE DETECTION AF
EYE DETECTION AF
u AUTO
PRE-AF
PRE-AF OFF
AF ILLUMINATOR
AF ILLUMINATOR ON
N ISO
200
O IMAGE SIZE O 3 : 2
T IMAGE QUALITY
FINE
Menu
Menu
Default
Default
U DYNAMIC RANGE V 100%
P FILM SIMULATION
c PROVIA/STANDARD
B SELF-TIMER
OFF
D
D WHITE BALANCE
AUTO
f COLOR
(0) MID
q SHARPNESS
(0) STANDARD
r HIGHLIGHT TONE
(0) STANDARD
s SHADOW TONE
(0) STANDARD
h NOISE REDUCTION
(0) STANDARD
K LONG EXPOSURE NR
ON
j
LENS MODULATION
OPTIMIZER
ON
l MOUNT ADAPTOR SETTING
LENS 5 (50mm)
115
Menus
Factory Defaults
Menu
Menu
Default
Default
m SHOOT WITHOUT LENS
OFF
c MF ASSIST
STANDARD
v AE/AF-LOCK MODE
AE&AF ON WHEN PRESSING
d AF-LOCK MODE
AF LOCK ONLY
C PHOTOMETRY o MULTI
v INTERLOCK SPOT AE &
FOCUS AREA
ON
p FLASH SET-UP
FLASH MODE AUTO
FLASH COMPENSATION ±0
RED EYE REMOVAL OFF
Menu
Menu
Default
Default
W MOVIE SET-UP
MOVIE MODE
i 1920 × 1080 60 fps
MOVIE ISO AUTO
MIC LEVEL ADJUSTMENT 3
MIC/REMOTE RELEASE
m MIC
X FILM SIMULATION BKT
FILM 1
c PROVIA/STANDARD
FILM 2
> Velvia/VIVID
FILM 3
e ASTIA/SOFT
e APERTURE SETTING AUTO + o MANUAL
x SHUTTER TYPE t MECHANICAL SHUTTER
116
Factory Defaults
Menu
Menu
Default
Default
o SOUND & FLASH
ON
b SOUND SET-UP
OPERATION VOL.
c
SHUTTER VOLUME
c
SHUTTER SOUND
i SOUND 1
PLAYBACK VOLUME 7
A SCREEN SET-UP
IMAGE DISP. OFF
EVF AUTOROTATE DISPLAYS
EVF AUTOROTATE DISPLAYS ON
PREVIEW EXP. IN MANUAL
MODE
ON
EVF BRIGHTNESS 0
LCD BRIGHTNESS 0
PREVIEW PIC. EFFECT ON
FRAMING GUIDELINE
F GRID 9
AUTOROTATE PB ON
FOCUS CHECK
FOCUS CHECK OFF
FOCUS SCALE UNITS
FOCUS SCALE UNITS METERS
DISP. CUSTOM SETTING
DISP. CUSTOM SETTING
• FRAMING GUIDELINE:
• ELECTRONIC LEVEL:
• AF DISTANCE INDICATOR:
• HISTOGRAM:
• All other options: R
Menu
Menu
Default
Default
h BUTTON/DIAL SETTING
FUNCTION (Fn) SETTING See page 44.
SELECTOR BUTTON SETTING Fn BUTTON
EDIT/SAVE QUICK MENU See page 41.
AE-L/AF-L BUTTON SETTING AE-L/AF-L
I FOCUS RING X CW
Z POWER MANAGEMENT
AUTO POWER OFF 2 MIN
HIGH PERFORMANCE OFF
V SENSOR CLEANING
WHEN SWITCHED ON OFF
WHEN SWITCHED OFF ON
t SAVE DATA SET-UP
FRAME NO. CONTINUOUS
SAVE ORG IMAGE OFF
J COLOR SPACE
sRGB
u EVF/LCD SETTING E EYE SENSOR
r CONNECTION SETTING
WIRELESS SETTINGS • RESIZE IMAGE FOR
SMARTPHONE
H
H: ON
GEOTAGGING SET-UP • GEOTAGGING: ON
• LOCATION INFO: ON
■ Setup Menu
117
Connections
Connections
Connections
Wireless Transfer
Wireless Transfer
Access wireless networks and connect to computers, smartphones, or tablets. For downloads and
other information, visit http://app.fujifilm-dsc.com/.
Wireless Connections: Smartphones
Wireless Connections: Smartphones
Install the “FUJIFILM Camera Remote” app on your
smartphone to browse the images on the cam-
era, download selected images, control the cam-
era remotely, or copy location data to the camera.
To connect to the smartphone, press the camera
function button (Fn7/Wi-Fi).
R You can also connect using the r WIRELESS
COMMUNICATION options in the camera shooting
and playback menu.
Wireless Connections: Computers
Wireless Connections: Computers
Once you have installed the “FUJIFILM PC AutoSave”
application and con gured your computer as a
destination for the images copied from the camera,
you can upload pictures from the camera using the
s PC AUTO SAVE option in the camera playback
menu or by pressing and holding the function but-
ton (
Fn7/Wi-Fi
) in playback mode.
118
Viewing Pictures on a Computer
Viewing Pictures on a Computer
Read this section for information on copying pictures to a computer.
Windows
Windows
Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized,
and printed. MyFinePix Studio is available for download from the following website:
http://fujifilm-dsc.com/mfs/
Once download is complete, double-click the downloaded le (“MFPS_Setup.EXE”) and follow the
on-screen instructions to complete installation. Proceed to “Connecting the Camera” (P 119) when
installation is complete.
Macintosh
Macintosh
Pictures can be copied to your computer using Image Capture (supplied with your computer) or other
software. Proceed to “Connecting the Camera” (P 119).
Viewing RAW Files
Viewing RAW Files
To view RAW les on your computer, use the RAW FILE CONVERTER, available for download from:
http://fujifilm-dsc.com/rfc/
119
Connections
Viewing Pictures on a Computer
Connecting the Camera
Connecting the Camera
1
Find a memory card containing pictures you want to copy to the computer and insert the card into
the camera (P 17).
R Windows users may require the Windows CD when starting the software for the rst time.
Q Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or
fully-charged battery before connecting the camera.
2
Turn the camera o and connect a USB cable as shown, mak-
ing sure the connectors are fully inserted. Connect the cam-
era directly to the computer; do not use a USB hub or key-
board.
Q The USB cable must be no more than 60 cm (1.9 ft.) long and be suitable for data transfer.
3
Turn the camera on.
4
Copy pictures to the computer using MyFinePix Studio or applications provided with your operat-
ing system.
For more information on using the software, start the application and select the appropriate option
from the Help menu.
120
Viewing Pictures on a Computer
Q If a memory card containing a large number of images is inserted, there may be a delay before the software
starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in progress and that the indi-
cator lamp is out before turning the camera o or disconnecting the USB cable (if the number of images cop-
ied is very large, the indicator lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server using the software in the
same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using
services that require an Internet connection.
Disconnecting the Camera
Disconnecting the Camera
After con rming that the indicator lamp is out, turn the camera o and disconnect the USB cable.
121
Connections
Printing Pictures via USB
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect a USB cable as shown and turn the
printer on.
Q The USB cable must be no more than 60 cm
(1.9 ft.) long and be suitable for data transfer.
2
Turn the camera on. t USB will be displayed
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
PICTBRIDGE
TOTAL:
00000
SHEETS
SETOK
FRAME
R Pictures can be printed from memory cards that has
been formatted in the camera.
R Page size, print quality, and border selections are
made using the printer.
Printing Selected Pictures
Printing Selected Pictures
1
Press the selector left or right to dis-
play a picture you wish to print.
R To print one copy of the current picture, pro-
ceed directly to Step 3.
2
Press the selector up or down to
choose the number of copies (up to
99). Repeat steps 1–2 to select ad-
ditional pictures.
3
Press MENU/OK to display a con rma-
tion dialog.
PRINT THESE FRAMES
TOTAL:
9
SHEETS
CANCELYES
4
Press MENU/OK to start printing.
122
Printing Pictures via USB
Printing the Date of Recording
Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in the PictBridge display and select PRINT
WITH DATE s (to print pictures without the date of
recording, select PRINT WITHOUT DATE). To ensure
that the date is correct, set the camera clock before
taking pictures. Some printers do not support date
printing. See the printer manual for details.
Printing the DPOF Print Order
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (P 104):
1
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
2
Press the selector up or down to
highlight u PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE
s
PRINT WITHOUT DATE
PRINT DPOF
3
Press MENU/OK to display a con rma-
tion dialog.
CANCELYES
PRINT DPOF OK?
TOTAL:
9
SHEETS
4
Press MENU/OK to start printing.
123
Connections
Printing Pictures via USB
During Printing
During Printing
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has
printed).
If printing is interrupted, turn the camera o and
then on again.
Disconnecting the Camera
Disconnecting the Camera
Con rm that the above message is not displayed and
turn the camera o . Disconnect the USB cable.
Creating a DPOF Print Order
Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print
order” for PictBridge-compatible printers or de-
vices that support DPOF.
DPOF
DPOF
DPOF (Digital Print Order Format) is stan-
dard that allows pictures to be printed from
“print orders” stored on the memory card.
The information in the order includes the
pictures to be printed and the number of copies of
each picture.
CANCEL
PRINTING
124
Printing Pictures via USB
■ WITH DATE s/ WITHOUT DATE
To modify the DPOF print order, select K PRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE s or WITHOUT DATE.
SLIDE SHOW
PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER
(
DPOF
)
PC AUTO SAVE
RED EYE REMOVAL
Y
WITH DATE
s
WITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording
on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
1
Press the selector left or right to dis-
play a picture you wish to include in
or remove from the print order.
2
Press the selector up or down to
choose the number of copies (up
to 99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
01
PRINT ORDER
(
DPOF
)
SHEETS
SETFRAME
DPOF:
00001
Total number of prints
Number of copies
3
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings are
complete, or DISP/BACK to exit with-
out changing the print order.
4
The total number of prints is dis-
played in the monitor. Press MENU/OK
to exit.
The pictures in the current
print order are indicated by a
u icon during playback.
125
Connections
Printing Pictures via USB
■ RESET ALL
To cancel the current print
order, select RESET ALL for
K PRINT ORDER (DPOF). The
con rmation shown at right
will be displayed; press MENU/OK
to remove all pictures from the
order.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted
containing a print order cre-
ated by another camera, the
message shown at right will
be displayed. Pressing MENU/OK
cancels the print order; a new
print order must be created as
described above.
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK?
126
instax SHARE Printers
instax SHARE Printers
Print pictures from your digital camera to instax SHARE printers.
Establishing a Connection
Establishing a Connection
Select r CONNECTION SETTING > instax PRINTER CONNECTION SETTING in the camera setup
menu and enter the instax SHARE printer name (SSID) and password.
The Printer Name (SSID) and Password
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default
password is “1111”. If you have already chosen a di erent password to print
from a smartphone, enter that password instead.
SSID:instax-
12345678
XxxxxXxxx XX:
000000000
XxxxxXxxx XX:
000000000
XxxxxXxxx XX:
000
127
Connections
instax SHARE Printers
Printing Pictures
Printing Pictures
1
Turn the printer on.
2
Select V instax PRINTER PRINT in the cam-
era playback menu. The camera will connect
to the printer.
FUJIFILM-CAMERA-1234
CONNECTING TO PRINTER
CANCEL
PRINTER PRINT
instax-12345678
R To print a frame from a burst sequence, display
the frame before selecting V instax PRINTER
PRINT.
3
Use the selector to display the picture you
want to print, then press MENU/OK.
100-0020
100-0020
instax-12345678
PRINTER PRINT
TRANSMIT CANCEL
R Pictures taken with other cameras can not be
printed.
R The area printed is smaller than the area visible
in the LCD monitor.
4
The picture will be sent to the printer and
printing will start.
FUJIFILM-CAMERA-1234
CANCEL
SENDING
PRINTER PRINT
instax-12345678
128
Viewing Pictures on TV
Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately
from third-party suppliers; note that the TV can only be used for playback, not shooting).
1
Turn the camera o .
2
Connect the cable as shown below.
Insert into
HDMI mini connector
Insert into
HDMI connector
Q Use an HDMI cable no more than 1.5m (4.9ft.) long.
R Be sure the connectors are fully inserted.
3
Tune the television to the HDMI input channel. See the documentation supplied with the televi-
sion for details.
4
Turn the camera on and press a button. The camera monitor turns o and pictures and movies
are played back on the TV. Note that the camera volume controls have no e ect on sounds played
on the TV; use the television volume controls to adjust the volume.
R The USB cable can not be used while an HDMI cable is connected.
R Some televisions may brie y display a black screen when movie playback begins.
129
Technical Notes
Technical Notes
Technical Notes
Optional Accessories
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
Accessories from FUJIFILM
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable Li-ion batteries
Rechargeable Li-ion batteries
NP-W126: Additional large-capacity NP-W126 rechargeable batteries can be purchased as required.
Battery chargers
Battery chargers
BC-W126: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126
charges an NP-W126 in about 150 minutes.
AC power adapters
AC power adapters
AC-9V (requires CP-W126 DC coupler): Use for extended shooting and playback or when copying pictures to a computer.
DC couplers
DC couplers
CP-W126: Connect the AC-9V to the camera.
130
Optional Accessories
Remote releases
Remote releases
RR-90: Use to reduce camera shake or keep the shutter open during a time exposure.
Stereo microphones
Stereo microphones
MIC-ST1: An external microphone for movie recording.
FUJINON Lenses
FUJINON Lenses
XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Shoe-mounted ash units
Shoe-mounted ash units
EF-20: This clip-on ash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.)
and supports TTL ash control. The ash head can be rotated upwards 90° for bounce lighting.
EF-42: This clip-on ash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.)
and supports TTL ash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).
The ash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on ash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
131
Technical Notes
Optional Accessories
Grips
Grips
HG-XE1: Features an improved grip.
Leather cases
Leather cases
BLC-XE1: This case combines practicality with the luxury of leather and comes with a shoulder strap made of the same material,
as well as a cloth that can be used to wrap the camera before putting it in the case and on other occasions. Pictures can be
taken and batteries and memory cards inserted or removed with the camera still in its case.
Macro extension tubes
Macro extension tubes
MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
Protector Filters
Protector Filters
PRF-39/PRF-43/PRF-49S/PRF-52/PRF-58/PRF-62/PRF-67/PRF-72/PRF-77: Use to protect the lens.
Teleconverters
Teleconverters
XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.
Mount Adapters
Mount Adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Front lens caps
Front lens caps
FLCP-39/FLCP-43/FLCP-52/FLCP-58/FLCP-62/FLCP-67/FLCP-72/FLCP-72 II/FLCP-77: Protect the front lens element when the lens is not in use.
Rear lens caps
Rear lens caps
RLCP-001: Protect the rear lens element when the lens is not attached to the camera.
Body caps
Body caps
BCP-001: Cover the camera lens mount when no lens is attached.
instax SHARE printers
instax SHARE printers
SP-1: Connect via wireless LAN to print pictures on instax lm.
132
Optional Accessories
Connecting the Camera to Other Devices
Connecting the Camera to Other Devices
X-E2S
■
■
Macro Extension Tube
Macro Extension Tube
MCEX-11/16
*
■
■
Computer Related
Computer Related
Computer
†
■
■
Printing
Printing
Printer
†
PictBridge-
compatible printer
†
* Available separately from FUJIFILM.
† Available separately from third-party suppliers. USB cables
must be no more than 60 cm (1.9 ft.) long, HDMI cables no
more than 1.5 m (4.9 ft.) long.
USB cable
†
USB cable
†
SD/SDHC/SDXC
memory card
†
■
■
Lenses
Lenses
XF-series lenses
*
XC-series lenses
*
■
■
Flash Photography
Flash Photography
EF-20 shoe mount
ash
*
EF-42 shoe mount
ash
*
EF-X20 shoe
mount ash
*
■
■
Remote Shutter
Remote Shutter
Releases
Releases
■
■
External
External
Microphones
Microphones
MIC-ST1 stereo
microphone
*
RR-90 remote release
*
■
■
M Mount Adapters
M Mount Adapters
FUJIFILM M MOUNT ADAPTER
*
HDTV
†
■
■
Audio/Visual
Audio/Visual
HDMI cable
†
SP-1 instax
SHARE
printer
*
Wireless LAN
133
Technical Notes
Caring for the Camera
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
Storage and Use
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high temper-
atures, such as in a closed vehicle on a sunny
day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic elds, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
• in contact with volatile chemicals such as pes-
ticides
• next to rubber or vinyl products
■ Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
■ Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera o and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Traveling
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may su er violent shocks that
could damage the camera.
134
Cleaning the Image Sensor
Cleaning the Image Sensor
Multiple photographs marred by spots or blotches in identical locations may indicate the presence
of dust on the camera image sensor. Clean the sensor using the V SENSOR CLEANING option in
the setup menu (P 110); if the problem persists, you can clean the sensor manually as described below.
Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning.
1
Use a blower (not a brush) to remove dust from the sensor.
Q Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor.
2
Check whether the dust has been successfully removed.
R Repeat Steps 1 and 2 as necessary.
3
Replace the body cap or lens.
135
Troubleshooting
Troubleshooting
Troubleshooting
Problems and Solutions
Problems and Solutions
■
■
Power and Battery
Power and Battery
Problem
Problem
Solution
Solution
The camera does not
The camera does not
turn on.
turn on.
•
•
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
•
•
The battery is inserted incorrectly
The battery is inserted incorrectly
: Reinsert in the correct orientation (
: Reinsert in the correct orientation (
P
P
17).
17).
•
•
The battery-chamber cover is not latched
The battery-chamber cover is not latched
: Latch the battery-chamber cover (
: Latch the battery-chamber cover (
P
P
18).
18).
The monitor does not
The monitor does not
turn on.
turn on.
The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button
The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button
halfway to activate the monitor.
halfway to activate the monitor.
The battery runs down
The battery runs down
quickly.
quickly.
•
•
The battery is cold
The battery is cold
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera
immediately before taking a picture.
immediately before taking a picture.
•
•
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
•
•
ON
ON
is selected for
is selected for G AUTOFOCUS SETTING>
PRE-AF
PRE-AF
: Turn
: Turn
PRE-AF
PRE-AF
off (
off (
P
P
92).
92).
•
•
S
S
is selected for shooting mode
is selected for shooting mode
: Select a diff erent mode (
: Select a diff erent mode (
P
P
51).
51).
•
•
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery.
battery.
The camera turns o
The camera turns o
suddenly.
suddenly.
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
Charging does not start.
Charging does not start.
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
Reinsert the battery in the correct orientation and make sure that the charger is plugged in (
P
P
16).
16).
Charging is slow.
Charging is slow.
Charge the battery at room temperature (
Charge the battery at room temperature (
P
P
v).
v).
The charging lamp blinks,
The charging lamp blinks,
but the battery does not
but the battery does not
charge.
charge.
•
•
There is dirt on the battery terminals
There is dirt on the battery terminals
: Clean the terminals with a soft, dry cloth.
: Clean the terminals with a soft, dry cloth.
•
•
The battery has been charged many times
The battery has been charged many times
: The battery has reached the end of its charging life. Purchase a new
: The battery has reached the end of its charging life. Purchase a new
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
battery. If the battery still fails to charge, contact your FUJIFILM dealer.
■
■
Menus and Displays
Menus and Displays
Problem
Problem
Solution
Solution
Display is not in English.
Display is not in English.
Select
Select
ENGLISH
ENGLISH
for
for
Q
Q
a
a
(
(
P
P
106).
106).
136
Problems and Solutions
■
■
Shooting
Shooting
Problem
Problem
Solution
Solution
No picture is taken when
No picture is taken when
the shutter button is
the shutter button is
pressed.
pressed.
•
•
The memory card is full
The memory card is full
: Insert a new memory card or delete pictures (
: Insert a new memory card or delete pictures (
P
P
17, 35).
17, 35).
•
•
The memory card is not formatted
The memory card is not formatted
: Format the memory card (
: Format the memory card (
P
P
113).
113).
•
•
There is dirt on the memory card contacts
There is dirt on the memory card contacts
: Clean the contacts with a soft, dry cloth.
: Clean the contacts with a soft, dry cloth.
•
•
The memory card is damaged
The memory card is damaged
: Insert a new memory card (
: Insert a new memory card (
P
P
17).
17).
•
•
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
•
•
The camera has turned o automatically
The camera has turned o automatically
: Turn the camera on (
: Turn the camera on (
P
P
21).
21).
•
•
The indicator lamp was orange when you attempted to record a panorama
The indicator lamp was orange when you attempted to record a panorama
: Wait until the indicator lamps turns off
: Wait until the indicator lamps turns off
(
(
P
P
4).
4).
Mottling (“noise”) appears
Mottling (“noise”) appears
in the monitor or view-
in the monitor or view-
nder when the shutter
nder when the shutter
button is pressed halfway.
button is pressed halfway.
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.
The camera does not focus.
The camera does not focus.
The subject is not suited to autofocus
The subject is not suited to autofocus
: Use focus lock (
: Use focus lock (
P
P
56) or manual focus (
56) or manual focus (
P
P
68).
68).
Intelligent Face Detection
Intelligent Face Detection
is not available.
is not available.
Intelligent Face Detection is not available in the current shooting mode
Intelligent Face Detection is not available in the current shooting mode
: Choose a diff erent shooting mode (
: Choose a diff erent shooting mode (
P
P
151).
151).
No face is detected.
No face is detected.
•
•
The subject’s face is obscured by sunglasses, a hat, long hair, or other objects
The subject’s face is obscured by sunglasses, a hat, long hair, or other objects
: Remove the obstructions.
: Remove the obstructions.
•
•
The subject’s face occupies only a small area of the frame
The subject’s face occupies only a small area of the frame
: Change the composition so that the subject’s face oc-
: Change the composition so that the subject’s face oc-
cupies a larger area of the frame.
cupies a larger area of the frame.
•
•
The subject’s head is tilted or horizontal
The subject’s head is tilted or horizontal
: Ask the subject to hold their head straight.
: Ask the subject to hold their head straight.
•
•
The camera is tilted
The camera is tilted
: Keep the camera level.
: Keep the camera level.
•
•
The subject’s face is poorly lit
The subject’s face is poorly lit
: Shoot in bright light.
: Shoot in bright light.
Wrong subject is selected.
Wrong subject is selected.
The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face
The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face
detection off and frame the picture using focus lock (
detection off and frame the picture using focus lock (
P
P
56).
56).
137
Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
The ash does not re.
The ash does not re.
•
•
The ash can not be used at current settings
The ash can not be used at current settings
: See the list of the settings that can be used with the fl ash (
: See the list of the settings that can be used with the fl ash (
P
P
151).
151).
•
•
The ash is lowered
The ash is lowered
: Raise the fl ash (
: Raise the fl ash (
P
P
36).
36).
•
•
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
•
•
The camera is in bracketing or continuous mode
The camera is in bracketing or continuous mode
: Select single frame mode (
: Select single frame mode (
P
P
60).
60).
•
•
OFF
OFF
is selected for
is selected for
o
o
SOUND & FLASH
SOUND & FLASH
: Select
: Select
ON
ON
(
(
P
P
106).
106).
Some ash modes are not
Some ash modes are not
available.
available.
OFF
OFF
is selected for
is selected for
o
o
SOUND & FLASH
SOUND & FLASH
: Select
: Select
ON
ON
(
(
P
P
106).
106).
The ash does not fully
The ash does not fully
light the subject.
light the subject.
•
•
The subject is not in range of the ash
The subject is not in range of the ash
: Position the subject in range of the fl ash (
: Position the subject in range of the fl ash (
P
P
147).
147).
•
•
The ash window is obstructed
The ash window is obstructed
: Hold the camera correctly (
: Hold the camera correctly (
P
P
30).
30).
•
•
Shutter speed is faster than
Shutter speed is faster than
/
/
s
s
: Choose a slower shutter speed (
: Choose a slower shutter speed (
P
P
37, 48, 50).
37, 48, 50).
Pictures are blurred.
Pictures are blurred.
•
•
The lens is dirty
The lens is dirty
: Clean the lens (
: Clean the lens (
P
P
xi).
xi).
•
•
The lens is blocked
The lens is blocked
: Keep objects away from the lens.
: Keep objects away from the lens.
•
•
s
s
is displayed during shooting and the focus frame is displayed in red
is displayed during shooting and the focus frame is displayed in red
: Check focus before shooting (
: Check focus before shooting (
P
P
30).
30).
•
•
k
k
is displayed during shooting
is displayed during shooting
: Use the fl ash or mount the camera on a tripod (
: Use the fl ash or mount the camera on a tripod (
P
P
36).
36).
Pictures are mottled.
Pictures are mottled.
•
•
Shutter speed is slow and the ambient temperature is high
Shutter speed is slow and the ambient temperature is high
: This is normal and does not indicate a malfunction.
: This is normal and does not indicate a malfunction.
•
•
The camera has been used continuously at high temperatures or a temperature warning is displayed
The camera has been used continuously at high temperatures or a temperature warning is displayed
: Turn the cam-
: Turn the cam-
era off and wait for it to cool down.
era off and wait for it to cool down.
138
Problems and Solutions
■
■
Playback
Playback
Problem
Problem
Solution
Solution
Pictures are grainy.
Pictures are grainy.
The pictures were taken with a diff erent make or model of camera.
The pictures were taken with a diff erent make or model of camera.
Playback zoom is unavail-
Playback zoom is unavail-
able.
able.
The pictures were created using
The pictures were created using
O
O
RESIZE
RESIZE
or with a diff erent make or model of camera.
or with a diff erent make or model of camera.
No sound in movie
No sound in movie
playback.
playback.
•
•
Playback volume is too low
Playback volume is too low
: Adjust playback volume (
: Adjust playback volume (
P
P
107).
107).
•
•
The microphone was obstructed
The microphone was obstructed
: Hold the camera correctly during recording (
: Hold the camera correctly during recording (
P
P
2, 38).
2, 38).
•
•
The speaker is obstructed
The speaker is obstructed
: Hold the camera correctly during playback (
: Hold the camera correctly during playback (
P
P
2, 40).
2, 40).
•
•
OFF
OFF
is selected for
is selected for
o
o
SOUND & FLASH
SOUND & FLASH
: Select
: Select
ON
ON
(
(
P
P
106).
106).
Selected pictures are not
Selected pictures are not
deleted.
deleted.
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
Some of the pictures selected for deletion are protected. Remove protection using the device with which it was
originally applied (
originally applied (
P
P
101).
101).
File numbering is unex-
File numbering is unex-
pectedly reset.
pectedly reset.
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-
tery-chamber cover (
tery-chamber cover (
P
P
17, 21).
17, 21).
■
■
Connections/Miscellaneous
Connections/Miscellaneous
For additional information on troubleshooting wireless connections, visit:
http://faq.fujifilm.com/digitalcamera/faq_product.html?pid=X
Problem
Problem
Solution
Solution
Problem connecting or
Problem connecting or
uploading pictures to
uploading pictures to
smartphone.
smartphone.
•
•
The smartphone is too far away
The smartphone is too far away
: Move the devices closer.
: Move the devices closer.
•
•
Nearby devices are causing radio interference
Nearby devices are causing radio interference
: Move the camera and smartphone away from microwave ovens or
: Move the camera and smartphone away from microwave ovens or
cordless phones.
cordless phones.
Can not upload images.
Can not upload images.
•
•
The smartphone is connected to another device
The smartphone is connected to another device
: The smartphone and camera can connect to only one device at a
: The smartphone and camera can connect to only one device at a
time. End the connection and try again.
time. End the connection and try again.
•
•
There are several smartphones in the vicinity
There are several smartphones in the vicinity
: Try connecting again. The presence of multiple smartphones can
: Try connecting again. The presence of multiple smartphones can
make connection diffi cult.
make connection diffi cult.
•
•
The current image is a movie or was created on another device and can not be uploaded to a smartphone.
The current image is a movie or was created on another device and can not be uploaded to a smartphone.
139
Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Smartphone will not
Smartphone will not
display pictures.
display pictures.
Select
Select
ON
ON
for
for
r
r
CONNECTION SETTING
CONNECTION SETTING
>
>
WIRELESS SETTING
WIRELESS SETTING
>
>
RESIZE IMAGE FOR SMARTPHONE
RESIZE IMAGE FOR SMARTPHONE
H
H
. Selecting
. Selecting
OFF
OFF
increases upload times for larger images; in addition, some phones may not display images
increases upload times for larger images; in addition, some phones may not display images
over a certain size.
over a certain size.
No picture or sound on TV.
No picture or sound on TV.
•
•
The camera is not properly connected
The camera is not properly connected
: Connect the camera properly (
: Connect the camera properly (
P
P
128
). Note that once the camera is con-
). Note that once the camera is con-
nected, pictures will be displayed on the TV instead of in the camera monitor.
nected, pictures will be displayed on the TV instead of in the camera monitor.
•
•
Input on the television is set to “TV”
Input on the television is set to “TV”
: Set input to “HDMI”.
: Set input to “HDMI”.
•
•
The volume on the TV is too low
The volume on the TV is too low
: Use the controls on the television to adjust the volume.
: Use the controls on the television to adjust the volume.
The computer does not
The computer does not
recognize the camera.
recognize the camera.
Be sure the camera and computer are correctly connected (
Be sure the camera and computer are correctly connected (
P
P
119
).
).
Can not transfer RAW or
Can not transfer RAW or
JPEG les to computer.
JPEG les to computer.
Use MyFinePix Studio to transfer pictures (Windows only;
Use MyFinePix Studio to transfer pictures (Windows only;
P
P
118
).
).
Pictures can not be
Pictures can not be
printed.
printed.
•
•
The camera is not properly connected
The camera is not properly connected
: Connect the camera correctly (
: Connect the camera correctly (
P
P
121
).
).
•
•
The printer is o
The printer is o
: Turn the printer on.
: Turn the printer on.
Only one copy is printed/
Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible.
The printer is not PictBridge compatible.
The camera is unrespon-
The camera is unrespon-
sive.
sive.
•
•
Temporary camera malfunction
Temporary camera malfunction
: Remove and reinsert the battery (
: Remove and reinsert the battery (
P
P
17, 19).
17, 19).
•
•
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
•
•
The camera is connected to a wireless LAN
The camera is connected to a wireless LAN
: End the connection.
: End the connection.
The camera does not func-
The camera does not func-
tion as expected.
tion as expected.
Remove and reinsert the battery (
Remove and reinsert the battery (
P
P
17, 19). If the problem persists, contact your FUJIFILM dealer.
17, 19). If the problem persists, contact your FUJIFILM dealer.
No sound.
No sound.
Select
Select
ON
ON
for
for
o
o
SOUND & FLASH
SOUND & FLASH
(
(
P
P
106).
106).
140
Warning Messages and Displays
Warning Messages and Displays
The following warnings appear in the display.
Warning
Warning
Description
Description
B
B
(red)
(red)
Low battery. Charge the battery (
Low battery. Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
A
A
(blinks red)
(blinks red)
Battery exhausted. Charge the battery (
Battery exhausted. Charge the battery (
P
P
16) or insert a fully-charged spare battery (
16) or insert a fully-charged spare battery (
P
P
17).
17).
k
k
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod.
s
s
(displayed in red with
(displayed in red with
red focus frame)
red focus frame)
The camera can not focus. Use focus lock to focus on another subject at the same distance, then recompose the
The camera can not focus. Use focus lock to focus on another subject at the same distance, then recompose the
picture (
picture (
P
P
56).
56).
Aperture or shutter speed
Aperture or shutter speed
displayed in red
displayed in red
The subject is too bright or too dark and the picture will be over- or under-exposed. Use the fl ash for additional
The subject is too bright or too dark and the picture will be over- or under-exposed. Use the fl ash for additional
lighting when taking photographs of poorly-lit subjects (
lighting when taking photographs of poorly-lit subjects (
P
P
36).
36).
FOCUS ERROR
FOCUS ERROR
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
TURN OFF THE CAMERA
TURN OFF THE CAMERA
AND TURN ON AGAIN
AND TURN ON AGAIN
LENS CONTROL ERROR
LENS CONTROL ERROR
LENS ERROR
LENS ERROR
Turn the camera off , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera
Turn the camera off , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera
on. If the problem persists, contact a FUJIFILM dealer.
on. If the problem persists, contact a FUJIFILM dealer.
BUSY
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (
The memory card is incorrectly formatted. Use the camera to format the card (
P
P
113).
113).
CARD NOT INITIALIZED
CARD NOT INITIALIZED
•
•
The memory card is not formatted or the memory card has been formatted in a computer or other device
The memory card is not formatted or the memory card has been formatted in a computer or other device
: Format the
: Format the
memory card using the
memory card using the
K
K
FORMAT
FORMAT
option in the camera setup menu (
option in the camera setup menu (
P
P
113).
113).
•
•
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
113). If the message persists, replace the card.
113). If the message persists, replace the card.
•
•
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
PROTECTED CARD
PROTECTED CARD
The memory card is locked. Unlock the card (
The memory card is locked. Unlock the card (
P
P
18).
18).
141
Troubleshooting
Warning Messages and Display
Warning
Warning
Description
Description
CARD ERROR
CARD ERROR
•
•
The memory card is not formatted for use in the camera
The memory card is not formatted for use in the camera
: Format the card (
: Format the card (
P
P
113).
113).
•
•
The memory card contacts require cleaning or the memory card is damaged
The memory card contacts require cleaning or the memory card is damaged
: Clean the contacts with a soft, dry
: Clean the contacts with a soft, dry
cloth. If the message is repeated, format the card (
cloth. If the message is repeated, format the card (
P
P
113). If the message persists, replace the card.
113). If the message persists, replace the card.
•
•
Incompatible memory card
Incompatible memory card
: Use a compatible card (
: Use a compatible card (
P
P
20).
20).
•
•
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
b
b
MEMORY FULL
MEMORY FULL
The memory card is full and pictures can not be recorded. Delete pictures (
The memory card is full and pictures can not be recorded. Delete pictures (
P
P
35) or insert a memory card with
35) or insert a memory card with
more free space (
more free space (
P
P
17).
17).
NO CARD
NO CARD
The shutter can only be released when a memory card is inserted. Insert a memory card.
The shutter can only be released when a memory card is inserted. Insert a memory card.
WRITE ERROR
WRITE ERROR
•
•
Memory card error or connection error
Memory card error or connection error
: Reinsert the card or turn the camera off and then on again. If the message
: Reinsert the card or turn the camera off and then on again. If the message
persists, contact a FUJIFILM dealer.
persists, contact a FUJIFILM dealer.
•
•
Not enough memory remaining to record additional pictures
Not enough memory remaining to record additional pictures
: Delete pictures (
: Delete pictures (
P
P
35) or insert a memory card with
35) or insert a memory card with
more free space (
more free space (
P
P
17).
17).
•
•
The memory card is not formatted
The memory card is not formatted
: Format the memory card (
: Format the memory card (
P
P
113).
113).
READ ERROR
READ ERROR
•
•
The le is corrupt or was not created with the camera
The le is corrupt or was not created with the camera
: The fi le can not be viewed.
: The fi le can not be viewed.
•
•
The memory card contacts require cleaning
The memory card contacts require cleaning
: Clean the contacts with a soft, dry cloth. If the message is repeated,
: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card (
format the card (
P
P
113). If the message persists, replace the card.
113). If the message persists, replace the card.
•
•
Camera malfunction
Camera malfunction
: Contact a FUJIFILM dealer.
: Contact a FUJIFILM dealer.
FRAME NO. FULL
FRAME NO. FULL
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and
select
select
RENEW
RENEW
for
for
B
B
FRAME NO.
FRAME NO.
Take a picture to reset frame numbering to 100-0001, then select
Take a picture to reset frame numbering to 100-0001, then select
CONTINU-
CONTINU-
OUS
OUS
for
for
B
B
FRAME NO.
FRAME NO.
(
(
P
P
110).
110).
TOO MANY FRAMES
TOO MANY FRAMES
•
•
A search has returned more than 30,000 results
A search has returned more than 30,000 results
: Choose a search that returns fewer results.
: Choose a search that returns fewer results.
•
•
More than 999 images are selected for deletion
More than 999 images are selected for deletion
: Choose fewer images.
: Choose fewer images.
142
Warning Messages and Display
Warning
Warning
Description
Description
PROTECTED FRAME
PROTECTED FRAME
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
An attempt was made to delete or rotate to a protected picture. Remove protection and try again (
P
P
101).
101).
CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
The picture is damaged or was not created with the camera.
m
m
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to pictures created with other devices.
Red-eye removal can not be applied to pictures created with other devices.
F
F
CANNOT EXECUTE
CANNOT EXECUTE
Red-eye removal can not be applied to movies.
Red-eye removal can not be applied to movies.
CAN NOT ROTATE
CAN NOT ROTATE
The selected picture can not be rotated.
The selected picture can not be rotated.
F
F
CAN NOT ROTATE
CAN NOT ROTATE
Movies can not be rotated.
Movies can not be rotated.
DPOF FILE ERROR
DPOF FILE ERROR
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-
The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-
puter and create a new print order.
puter and create a new print order.
CAN NOT SET DPOF
CAN NOT SET DPOF
The picture can not be printed using DPOF.
The picture can not be printed using DPOF.
F
F
CAN NOT SET DPOF
CAN NOT SET DPOF
Movies can not be printed using DPOF.
Movies can not be printed using DPOF.
COMMUNICATION ERROR
COMMUNICATION ERROR
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm
that the device is turned on and that the USB cable is connected.
that the device is turned on and that the USB cable is connected.
PRINTER ERROR
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing,
turn the printer off and then turn it back on.
turn the printer off and then turn it back on.
PRINTER ERROR
PRINTER ERROR
RESUME?
RESUME?
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not
resume automatically, press
resume automatically, press
MENU/OK
MENU/OK
to resume.
to resume.
CANNOT BE PRINTED
CANNOT BE PRINTED
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.
p
p
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
143
Appendix
Appendix
Appendix
Memory Card Capacity
Memory Card Capacity
The following table shows the recording time or number of pictures available at di erent image sizes.
All gures are approximate; le size varies with the scene recorded, producing wide variations in the
number of les that can be stored. The number of exposures or length remaining may not diminish
at an even rate.
Capacity
Capacity
O
O
8 GB
8 GB
16 GB
16 GB
T
T
FINE
FINE
T
T
NORMAL
NORMAL
T
T
FINE
FINE
T
T
NORMAL
NORMAL
Photographs
Photographs
O
O
3 : 2
3 : 2
1210
1210
1910
1910
2490
2490
3950
3950
RAW
RAW
230
230
490
490
Movies
Movies
1
1
i
i
1920×1080 60 fps
1920×1080 60 fps
2
2
i
i
1920×1080 50 fps
1920×1080 50 fps
2
2
i
i
1920×1080 30 fps
1920×1080 30 fps
2
2
i
i
1920×1080 25 fps
1920×1080 25 fps
2
2
i
i
1920×1080 24 fps
1920×1080 24 fps
2
2
26 min.
26 min.
54 min.
54 min.
h
h
1280×720 60 fps
1280×720 60 fps
3
3
h
h
1280×720 50 fps
1280×720 50 fps
3
3
h
h
1280×720 30 fps
1280×720 30 fps
3
3
h
h
1280×720 25 fps
1280×720 25 fps
3
3
h
h
1280×720 24 fps
1280×720 24 fps
3
3
51 min.
51 min.
105 min.
105 min.
1 Use a H card or better.
2 Individual movies can not exceed 14 minutes in length.
3 Individual movies can not exceed 27 minutes in length.
144
Links
Links
For more information on FUJIFILM digital camera, visit the websites listed below.
FUJIFILM X-E2S Product Information
FUJIFILM X-E2S Product Information
Optional accessories and support information
can be found on the following website.
fujilm X-E2S
Firmware Updates
Firmware Updates
Updates to product rmware may result in
changes not described in the manual. For more
information, visit:
http://ww w.fujifilm.com/support/digital_cameras/
software/fw_table.html
fujilm rmware
Free FUJIFILM Apps
Free FUJIFILM Apps
FUJIFILM apps give you more opportunities to
enjoy your pictures on smartphones, tablets, and
computers.
http://fujifilm-dsc.com/
fujilm Wi-Fi app
For the latest version of MyFinePix Studio, visit:
http://fujifilm-dsc.com/mfs/
fujilm mfs
For the latest version of RAW FILE CONVERTER, visit:
http://fujifilm-dsc.com/rfc/
fujilm rfc
145
Appendix
Speci cations
Speci cations
System
Model
Model
FUJIFILM X-E2S
FUJIFILM X-E2S
digital camera
digital camera
E ective pixels
E ective pixels
Approx. 16.3 million
Approx. 16.3 million
Image sensor
Image sensor
23.6 mm × 15.6 mm (APS-C), X-Trans CMOS II sensor with square pixels and primary color fi lter
23.6 mm × 15.6 mm (APS-C), X-Trans CMOS II sensor with square pixels and primary color fi lter
Storage media
Storage media
FUJIFILM-recommended SD/SDHC/SDXC memory cards
FUJIFILM-recommended SD/SDHC/SDXC memory cards
File system
File system
Compliant with
Compliant with
D
D
esign Rule for
esign Rule for
C
C
amera
amera
F
F
ile System
ile System
(DCF)
(DCF)
, Exif 2.3, and
, Exif 2.3, and
D
D
igital
igital
P
P
rint
rint
O
O
rder
rder
F
F
ormat
ormat
(DPOF)
(DPOF)
File format
File format
•
•
Still pictures
Still pictures
: Exif 2.3 JPEG
: Exif 2.3 JPEG
(compressed)
(compressed)
; RAW
; RAW
(original RAF format, special-purpose software required)
(original RAF format, special-purpose software required)
; RAW+JPEG available
; RAW+JPEG available
•
•
Movies
Movies
: H.264 standard with stereo sound
: H.264 standard with stereo sound
(MOV)
(MOV)
Image size
Image size
•
•
O
O
3 : 2
3 : 2
: 4,896 × 3,264
: 4,896 × 3,264
•
•
P
P
3 : 2
3 : 2
: 3,456 × 2,304
: 3,456 × 2,304
•
•
Q
Q
3 : 2
3 : 2
: 2,496 × 1,664
: 2,496 × 1,664
•
•
O
O
16 : 9
16 : 9
: 4,896 × 2,760
: 4,896 × 2,760
•
•
P
P
16 : 9
16 : 9
: 3,456 × 1,944
: 3,456 × 1,944
•
•
Q
Q
16 : 9
16 : 9
: 2,496 × 1,408
: 2,496 × 1,408
•
•
O
O
1 : 1
1 : 1
: 3,264 × 3,264
: 3,264 × 3,264
•
•
P
P
1 : 1
1 : 1
: 2,304 × 2,304
: 2,304 × 2,304
•
•
Q
Q
1 : 1
1 : 1
: 1,664 × 1,664
: 1,664 × 1,664
•
•
O
O
panorama
panorama
: 2,160 × 9,600
: 2,160 × 9,600
(vertical)
(vertical)
/ 9,600 × 1,440
/ 9,600 × 1,440
(horizontal)
(horizontal)
•
•
P
P
panorama
panorama
: 2,160 × 6,400
: 2,160 × 6,400
(vertical)
(vertical)
/ 6,400 × 1,440
/ 6,400 × 1,440
(horizontal)
(horizontal)
Lens mount
Lens mount
FUJIFILM X mount
FUJIFILM X mount
Sensitivity
Sensitivity
Standard output sensitivity equivalent to ISO 200 – 6400 in increments of
Standard output sensitivity equivalent to ISO 200 – 6400 in increments of
/
/
EV; AUTO; extended output sensitivity
EV; AUTO; extended output sensitivity
equivalent to ISO 100, 12800, 25600, or 51200
equivalent to ISO 100, 12800, 25600, or 51200
Metering
Metering
256-segment
256-segment
t
t
hrough-
hrough-
t
t
he-
he-
l
l
ens (TTL) metering; MULTI, SPOT, AVERAGE
ens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control
Exposure control
Programmed AE
Programmed AE
(with program shift)
(with program shift)
; shutter-priority AE; aperture-priority AE; manual exposure
; shutter-priority AE; aperture-priority AE; manual exposure
Exposure compensation
Exposure compensation
–3 EV – +3 EV in increments of
–3 EV – +3 EV in increments of
/
/
EV
EV
146
Speci cations
System
Shutter speed
Shutter speed
•
•
MECHANICAL SHUTTER
MECHANICAL SHUTTER
-
-
P
P
mode
mode
: 4 sec. to
: 4 sec. to
/
/
sec.
sec.
-
-
Bulb
Bulb
: Max. 60 min.
: Max. 60 min.
-
-
Time
Time
: 30 sec. to
: 30 sec. to
/
/
sec.
sec.
-
-
All other modes
All other modes
: 30 sec. to
: 30 sec. to
/
/
sec.
sec.
•
•
ELECTRONIC SHUTTER
ELECTRONIC SHUTTER
-
-
P
P
,
,
S
S
,
,
A
A
, and
, and
M
M
modes
modes
: 1 sec. to
: 1 sec. to
/
/
sec.
sec.
-
-
Bulb
Bulb
: Fixed at 1 sec.
: Fixed at 1 sec.
-
-
Time
Time
: 1 sec. to
: 1 sec. to
/
/
sec.
sec.
•
•
MECHANICAL + ELECTRONIC
MECHANICAL + ELECTRONIC
-
-
P
P
mode
mode
: 4 sec. to
: 4 sec. to
/
/
sec.
sec.
-
-
Bulb
Bulb
: Max. 60 min.
: Max. 60 min.
-
-
Time
Time
: 30 sec. to
: 30 sec. to
/
/
sec.
sec.
-
-
All other modes
All other modes
: 30 sec. to
: 30 sec. to
/
/
sec.
sec.
Continuous
Continuous
Mode
Mode
Frame rate (fps)
Frame rate (fps)
Frames per burst
Frames per burst
I
I
J
J
7.0
7.0
Up to approximately 18
Up to approximately 18
O
O
3.0
3.0
Until card is full
Until card is full
R Use a H card or better.
R The frame rate varies with shooting conditions and the number of images recorded.
Focus
Focus
•
•
Mode
Mode
: Single or continuous AF; manual focus with focus ring; AF+MF
: Single or continuous AF; manual focus with focus ring; AF+MF
•
•
Focus-area selection
Focus-area selection
: SINGLE POINT, ZONE, WIDE/TRACKING
: SINGLE POINT, ZONE, WIDE/TRACKING
•
•
Autofocus system
Autofocus system
: Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator
: Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator
White balance
White balance
Custom, color temperature selection, auto, direct sunlight, shade, daylight fl uorescent, warm white fl uorescent,
Custom, color temperature selection, auto, direct sunlight, shade, daylight fl uorescent, warm white fl uorescent,
cool white fl uorescent, incandescent, underwater
cool white fl uorescent, incandescent, underwater
Self-timer
Self-timer
Off , 2 sec., 10 sec.
Off , 2 sec., 10 sec.
147
Appendix
Speci cations
System
Flash
Flash
•
•
Type
Type
: Manual pop-up fl ash unit
: Manual pop-up fl ash unit
•
•
Guide number
Guide number
: Approx. 7/22 (ISO 200, m/ft.)
: Approx. 7/22 (ISO 200, m/ft.)
Mode
Mode
Auto, fi ll fl ash, off , slow sync, rear-curtain sync, commander
Auto, fi ll fl ash, off , slow sync, rear-curtain sync, commander
(red-eye removal o )
(red-eye removal o )
; auto with red-eye removal, fi ll fl ash
; auto with red-eye removal, fi ll fl ash
with red-eye remova
with red-eye remova
l, off , s
l, off , s
low sync with red-eye removal, rear-curtain sync with red-eye removal, commander
low sync with red-eye removal, rear-curtain sync with red-eye removal, commander
(red-eye removal on)
(red-eye removal on)
Hot shoe
Hot shoe
Accessory shoe with TTL contacts
Accessory shoe with TTL contacts
View nder
View nder
0.5-in., 2,360k-dot color OLED viewfi nder with diopter adjustment (–4 to +2m
0.5-in., 2,360k-dot color OLED viewfi nder with diopter adjustment (–4 to +2m
–1
–1
); eye point approx. 23 mm; frame
); eye point approx. 23 mm; frame
coverage approx. 100%
coverage approx. 100%
LCD monitor
LCD monitor
3.0-in/7.6 cm., 1,040k-dot color LCD monitor; frame coverage approx. 100%
3.0-in/7.6 cm., 1,040k-dot color LCD monitor; frame coverage approx. 100%
Movies
Movies
•
•
i
i
1920 × 1080 60fps
1920 × 1080 60fps
: Frame size 1,920 × 1,080 (1080p); 60 fps; stereo sound
: Frame size 1,920 × 1,080 (1080p); 60 fps; stereo sound
•
•
i
i
1920 × 1080 50fps
1920 × 1080 50fps
: Frame size 1,920 × 1,080 (1080p); 50 fps; stereo sound
: Frame size 1,920 × 1,080 (1080p); 50 fps; stereo sound
•
•
i
i
1920 × 1080 30fps
1920 × 1080 30fps
: Frame size 1,920 × 1,080 (1080p); 30 fps; stereo sound
: Frame size 1,920 × 1,080 (1080p); 30 fps; stereo sound
•
•
i
i
1920 × 1080 25fps
1920 × 1080 25fps
: Frame size 1,920 × 1,080 (1080p); 25 fps; stereo sound
: Frame size 1,920 × 1,080 (1080p); 25 fps; stereo sound
•
•
i
i
1920 × 1080 24fps
1920 × 1080 24fps
: Frame size 1,920 × 1,080 (1080p); 24 fps; stereo sound
: Frame size 1,920 × 1,080 (1080p); 24 fps; stereo sound
•
•
h
h
1280 × 720 60fps
1280 × 720 60fps
: Frame size 1,280 × 720 (720p); 60 fps; stereo sound
: Frame size 1,280 × 720 (720p); 60 fps; stereo sound
•
•
h
h
1280 × 720 50fps
1280 × 720 50fps
: Frame size 1,280 × 720 (720p); 50 fps; stereo sound
: Frame size 1,280 × 720 (720p); 50 fps; stereo sound
•
•
h
h
1280 × 720 30fps
1280 × 720 30fps
: Frame size 1,280 × 720 (720p); 30 fps; stereo sound
: Frame size 1,280 × 720 (720p); 30 fps; stereo sound
•
•
h
h
1280 × 720 25fps
1280 × 720 25fps
: Frame size 1,280 × 720 (720p); 25 fps; stereo sound
: Frame size 1,280 × 720 (720p); 25 fps; stereo sound
•
•
h
h
1280 × 720 24fps
1280 × 720 24fps
: Frame size 1,280 × 720 (720p); 24 fps; stereo sound
: Frame size 1,280 × 720 (720p); 24 fps; stereo sound
148
Speci cations
Input/output terminals
HDMI output
HDMI output
HDMI mini connector
HDMI mini connector
Digital input/output
Digital input/output
Micro USB connector (USB 2.0 High-Speed)
Micro USB connector (USB 2.0 High-Speed)
Microphone/
Microphone/
remote release connector
remote release connector
φ2.5 mm mini-stereo jack
φ2.5 mm mini-stereo jack
Power supply/other
Power supply
Power supply
NP-W126 rechargeable battery
NP-W126 rechargeable battery
Battery life
Battery life
(approximate
(approximate
number of frames that can
number of frames that can
be taken with a fully-charged
be taken with a fully-charged
battery in mode
battery in mode
P
P
, XF 35 mm
, XF 35 mm
f/1.4 R lens)
f/1.4 R lens)
Battery type
Battery type
Approximate number of frames
Approximate number of frames
NP-W126
NP-W126
(type supplied with camera)
(type supplied with camera)
350
350
CIPA standard, measured using battery supplied with camera and SD memory card.
CIPA standard, measured using battery supplied with camera and SD memory card.
Note
Note
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
: Number of shots that can be taken with battery varies with battery charge level and will decline at low
temperatures.
temperatures.
Camera size
Camera size
(W × H × D)
(W × H × D)
129.0 mm × 74.9 mm × 37.2 mm (
129.0 mm × 74.9 mm × 37.2 mm (
30.9 mm excluding projections, measured at thinnest part
30.9 mm excluding projections, measured at thinnest part
)/5.0 in. × 2.9 in. × 1.4 in. (1.2 in.)
)/5.0 in. × 2.9 in. × 1.4 in. (1.2 in.)
Camera weight
Camera weight
Approx. 300 g/10.5 oz., excluding battery, accessories, and memory card
Approx. 300 g/10.5 oz., excluding battery, accessories, and memory card
Shooting weight
Shooting weight
Approx. 350 g/12.3 oz., including battery and memory card
Approx. 350 g/12.3 oz., including battery and memory card
Operating conditions
Operating conditions
•
•
Temperature
Temperature
: 0 °C to +40 °C/+32 °F to +104 °F
: 0 °C to +40 °C/+32 °F to +104 °F
•
•
Humidity
Humidity
: 10% – 80%
: 10% – 80%
(no condensation)
(no condensation)
Wireless transmitter
Standards
Standards
IEEE 802.11b/g/n
IEEE 802.11b/g/n
(standard wireless protocol)
(standard wireless protocol)
Operating frequency
Operating frequency
•
•
U. S. A., Canada, Taiwan
U. S. A., Canada, Taiwan
: 2,412 MHz–2,462 MHz
: 2,412 MHz–2,462 MHz
(11 channels)
(11 channels)
•
•
Other countries
Other countries
: 2,412 MHz–2,472 MHz
: 2,412 MHz–2,472 MHz
(13 channels)
(13 channels)
Access protocols
Access protocols
Infrastructure
Infrastructure
149
Appendix
Speci cations
NP-W126 rechargeable battery
Nominal voltage
Nominal voltage
7.2 V DC
7.2 V DC
Nominal capacity
Nominal capacity
1,260 mAh
1,260 mAh
Operating temperature
Operating temperature
0 °C to +40 °C/+32 °F to +104 °F
0 °C to +40 °C/+32 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.8 in. × 0.6 in.
36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.8 in. × 0.6 in.
Weight
Weight
Approx. 47 g/1.7 oz.
Approx. 47 g/1.7 oz.
BC-W126 battery charger
Rated input
Rated input
100 V – 240 V AC, 50/60 Hz
100 V – 240 V AC, 50/60 Hz
Input capacity
Input capacity
13 –21 VA
13 –21 VA
Rated output
Rated output
8.4 V DC, 0.6 A
8.4 V DC, 0.6 A
Supported batteries
Supported batteries
NP-W126 rechargeable batteries
NP-W126 rechargeable batteries
Charging time
Charging time
Approx. 150 minutes (+20 °C/+68 °F)
Approx. 150 minutes (+20 °C/+68 °F)
Operating temperature
Operating temperature
5 °C to +40 °C/+41 °F to +104 °F
5 °C to +40 °C/+41 °F to +104 °F
Dimensions
Dimensions
(W × H × D)
(W × H × D)
65 mm × 91.5 mm × 28 mm/2.5 in. × 3.6 in. × 1.1 in., excluding projections
65 mm × 91.5 mm × 28 mm/2.5 in. × 3.6 in. × 1.1 in., excluding projections
Weight
Weight
Approx. 77 g/2.7 oz., excluding battery
Approx. 77 g/2.7 oz., excluding battery
Weight and dimensions vary with the country or region of sale. Labels, menus, and other displays may di er from those on the
actual camera.
150
Speci cations
■
■
Notices
Notices
• Speci cations subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/
digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.
• Although the view nder and LCD monitor are manufactured using advanced high-precision technology, small
bright points and anomalous colors may appear, particularly in the vicinity of text. This is normal for this type of
LCD display and does not indicate a malfunction; images recorded with the camera are una ected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric elds, static electricity,
or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
151
Appendix
Restrictions on Camera Settings
Restrictions on Camera Settings
The options available in each shooting mode are listed below. Some options may not be available for
the items that are supported in any given mode, and function may be restricted depending on shoot-
ing conditions.
Auto mode
Auto mode
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
F
F
r
r
2
2
Shooting mode/
Shooting mode/
scene position
scene position
P
P
S
S
A
A
M
M
Y
Y
j
j
u
u
S
S
h
h
Z
Z
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
p
p
12
12
RED EYE REMOVAL: OFF
RED EYE REMOVAL: OFF
A
A
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
N
N
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
F
F
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
l
l
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
D
D
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
P
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
RED EYE REMOVAL: ON
RED EYE REMOVAL: ON
K
K
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
L
L
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
M
M
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
d
d
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
D
D
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
P
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
I
I
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
B
B
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
d
d
✔
✔
✔
✔
✔
✔
✔
✔
5
5
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
F
F
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
S.S.
S.S.
✔
✔
1
1
✔
✔
4
4
✔
✔
1
1
✔
✔
4
4
✔
✔
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
3
3
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
3
3
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
3
3
✔
✔
x
x
t
t
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
t
t
+
+
s
s
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
s
s
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
8
8
Program shift
Program shift
✔
✔
✔
✔
✔
✔
✔
✔
8
8
d
d
AF-L
AF-L
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
AE+AF
AE+AF
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
152
Restrictions on Camera Settings
Auto mode
Auto mode
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
F
F
r
r
2
2
Shooting mode/
Shooting mode/
scene position
scene position
P
P
S
S
A
A
M
M
Y
Y
j
j
u
u
S
S
h
h
Z
Z
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
N
N
AUTO1/AUTO2/
AUTO1/AUTO2/
AUTO3
AUTO3
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
H (51200)/
H (51200)/
H (25600)/
H (25600)/
H (12800)
H (12800)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
6400 – 1000
6400 – 1000
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
800
800
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
640 – 400
640 – 400
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
320 – 200
320 – 200
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
L (100)
L (100)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
O
O
O
O
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
P
P
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
Q
Q
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
T
T
FINE/NORMAL
FINE/NORMAL
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
RAW
RAW
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
U
U
AUTO
AUTO
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
8
8
V
V
/
/
W
W
/
/
X
X
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
P
P
c
c
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
d
d
/
/
e
e
/
/
i
i
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
g
g
/
/
h
h
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
b
b
/
/
e
e
/
/
d
d
/
/
f
f
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
f
f
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
D
D
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
Bracketing
Bracketing
✔
✔
✔
✔
✔
✔
✔
✔
Continuous Shooting
Continuous Shooting
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
b
b
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
y
y
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
153
Appendix
Restrictions on Camera Settings
Auto mode
Auto mode
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
F
F
r
r
2
2
Shooting mode/
Shooting mode/
scene position
scene position
P
P
S
S
A
A
M
M
Y
Y
j
j
u
u
S
S
h
h
Z
Z
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
C
C
o
o
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
8
8
p
p
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
q
q
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
Focus
Focus
mode
mode
S
S
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
C
C
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
M
M
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
G
G
r
r
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
y
y
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
z
z
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
c
c
STANDARD
STANDARD
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
DIGITAL SPLIT
DIGITAL SPLIT
IMAGE
IMAGE
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FOCUS PEAK
FOCUS PEAK
HIGHLIGHT
HIGHLIGHT
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
AF+MF
AF+MF
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
L
L
L
L
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
l
l
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
M
M
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
m
m
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
OFF
OFF
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1
1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
j
j
6
6
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
RED EYE REMOVAL
RED EYE REMOVAL
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
AF ILLUMINATOR
AF ILLUMINATOR
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
154
Restrictions on Camera Settings
Auto mode
Auto mode
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
F
F
r
r
2
2
Shooting mode/
Shooting mode/
scene position
scene position
P
P
S
S
A
A
M
M
Y
Y
j
j
u
u
S
S
h
h
Z
Z
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
f
f
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
q
q
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
r
r
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
s
s
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
h
h
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
K
K
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
u
u
/
/
K
K
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
3
3
A
A
PREVIEW EXP. IN
PREVIEW EXP. IN
MANUAL MODE
MANUAL MODE
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
8
8
FOCUS CHECK (AF)
FOCUS CHECK (AF)
9
9
✔
✔
7
7
✔
✔
7
7
✔
✔
7
7
✔
✔
7
7
✔
✔
7
7
✔
✔
7
7
✔
✔
7
7
✔
✔
7
7
FOCUS CHECK (MF)
FOCUS CHECK (MF)
9
9
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
v
v
FRAMING
FRAMING
GUIDELINE
GUIDELINE
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
ELECTRONIC LEVEL
ELECTRONIC LEVEL
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
AF DISTANCE
AF DISTANCE
INDICATOR
INDICATOR
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
MF DISTANCE
MF DISTANCE
INDICATOR
INDICATOR
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
HISTOGRAM
HISTOGRAM
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
APERTURE/
APERTURE/
S-SPEED/ISO
S-SPEED/ISO
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
10
10
EXP.
EXP.
COMPENSATION
COMPENSATION
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PHOTOMETRY
PHOTOMETRY
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FLASH
FLASH
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WHITE BALANCE
WHITE BALANCE
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FILM SIMULATION
FILM SIMULATION
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
155
Appendix
Restrictions on Camera Settings
Auto mode
Auto mode
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
F
F
r
r
2
2
Shooting mode/
Shooting mode/
scene position
scene position
P
P
S
S
A
A
M
M
Y
Y
j
j
u
u
S
S
h
h
Z
Z
M
M
N
N
O
O
H
H
p
p
Q
Q
R
R
s
s
f
f
U
U
V
V
W
W
v
v
DYNAMIC RANGE
DYNAMIC RANGE
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
FRAMES
FRAMES
REMAINING
REMAINING
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
IMAGE SIZE/
IMAGE SIZE/
QUALITY
QUALITY
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
BATTERY LEVEL
BATTERY LEVEL
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
J
J
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
11
11
✔
✔
8
8
1
1
Fixed automatically.
Fixed automatically.
2
2
Wireless remote photography.
Wireless remote photography.
3
3
Options available vary with shooting mode.
Options available vary with shooting mode.
4
4
A
A
is not available.
is not available.
5
5
Available only with auto ISO sensitivity.
Available only with auto ISO sensitivity.
6
6
Varies with lens.
Varies with lens.
7
7
Available only when
Available only when
SINGLE POINT
SINGLE POINT
is selected for
is selected for
AF MODE
AF MODE
in
in
focus mode
focus mode
S
S
.
.
8
8
Still photography settings are used.
Still photography settings are used.
9
9
Turns o automatically when interval timer is on.
Turns o automatically when interval timer is on.
10
10
Display shows shutter speed only.
Display shows shutter speed only.
11
11
sRGB selected automatically.
sRGB selected automatically.
12
12
Flash turns o when
Flash turns o when
ELECTRONIC SHUTTER
ELECTRONIC SHUTTER
is selected for
is selected for
SHUTTER TYPE
SHUTTER TYPE
.
.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
