Loading ...
Loading ...
Loading ...
.devresersthgirllA.cnI,stcudorPemoHxulortcelE9002
5
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions, then follow the symbol for the functions you
desire. The unit can be controlled by the touch pad alone or with the remote.
ELECTRONIC CONTROL
Air Conditioner Features
Operating Instructions
NOTE
The following instructions represent the Touch Pad, the same instructions can be used for the Remote Control.
YOU WILL SEE:TO TURN UNIT ON:
Air Conditioner Features & Operating Instructions
Battery Size: AAA
Warning: Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
The display and all LED indicators on the control panel of the unit can
be turned off by pressing the "Light" button on the remote control. If
any other button of the control panel and remote control is pressed
after that, the unit will beep to indicate it works as the corresponding
direction of pressing specific button, and the display and LED
indicators will illuminate accordingly, but they will turn off again in 5
seconds if no further operation.
WITH DISPLAY & REMOTE
SENSING BUTTON
STANDARD REMOTE
NOTE: The unit will run in Cool mode with Eco feature
and Auto fan speed setting when used for the first time.
With the Eco feature, when the room temperature is below the
set temperature, the fan will continue to run for 3 minutes after
the compressor shuts off. The fan then cycles on for 2 minutes
at 10 minute intervals until the room temperature is above the
set temperature, at which time the compressor turns back on.
Eco feature can be activated or deactivated by pressing Eco
button, but it is invalid in fan only mode.
TURNS UNIT
ON OR OFF
ECO
FEATURE
REMOTE TEMP
SENSING INDICATOR
(some models)
SLEEP
FEATURE
SETS MODE
ADJUSTS
TEMPERATURE
OR TIME
SETS
FAN SPEED
CHECK FILTER
RESET BUTTON
ACTIVATES
TIMER
DISPLAYS
TEMPERATURE/TIME
PRESS ON/OFF BUTTON
DO THIS:
Light Feature:
Press the "Light" button again or unplug the unit to cancel this setting.
Loading ...
Loading ...
Loading ...