Loading ...
Loading ...
Loading ...
◗ For assistance, visit our website,
www.philips.com/support or call toll free:
1-800-243-3050.
1 Turn razor ON.
2 Allow razor to run until the battery is
empty/depleted.
3 Turn razor OFF.
4 Use a screwdriver to remove the screws
in the back of the razor and in the hair
chamber.
5 Remove the front and back panels with a
screwdriver.
6 Bend the 6 hooks aside and take out the
power unit.
Be careful, the hooks are sharp.
7 Remove the rechargeable battery.
Be careful, the battery strips are very sharp.
8 Do not attempt to replace battery.
Insulate battery ends by covering with tape
and/or place battery in a small plastic bag.
9 Discard your razor. Do not attempt to
plug power cord into the outlet or
recharge the razor after the battery has
been removed.
ENGLISH
Storage
◗ Be sure razor is turned off. Remove cord from
outlet and razor before storing in a safe, dry
location where it will not be crushed, banged,
or subject to damage.
◗ Do not wrap power cord around razor when
storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not place or store razor where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C ◗ Put the Protective Cap on razor to protect
heads.
Assistance
◗ For assistance, visit our website:
www.philips.com/support or
call toll free 1-800-243-3050
◗ Online information is available 24 hours a day,
7 days a week.
Battery Removal
C
◗ This Philips Norelco razor contains a
rechargeable Lithium-Ion battery
which must be disposed of properly.
◗ Battery should only be removed when
razor is to be discarded.
24
ENGLISH
25
Loading ...