Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone.
Use cookware with correct di-
mensions. Refer to "Technical
data".
and a number come on.
There is an error in the hob. Deactivate the hob and acti-
vate it again after 30 seconds.
If comes on again, discon-
nect the hob from the electrical
supply. After 30 seconds, con-
nect the hob again. If the prob-
lem continues, speak to an Au-
thorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is in-
correct.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the in-
stallation.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
INSTALLATION
WARNING! Refer to Safety chapters.
BEFORE THE INSTALLATION
Before you install the hob, write down the
information bellow from the rating plate. The rating
plate is on the bottom of the hob.
Serial number ...........................
BUILT-IN HOBS
Only use the built-in hobs after you assemble the
hob into correct built-in units and work surfaces
that align to the standards.
CONNECTION CABLE
• For a single phase or two phase connection,
use the cable type: H05BB-F or H03V2V2-F
which withstands a temperature of 70°C or
higher.
• To replace the damaged mains cable, use the
cable: H05BB-F or H03V2V2-F which
withstands a temperature of 70°C or higher.
12
Loading ...
Loading ...
Loading ...