Loading ...
Loading ...
Loading ...
For typical under counter installation of an electric built-in oven see Figure below.
Only certain cooktop models may be installed over
certain built-in electric oven models. Approved cooktops
and built-in ovens are listed by the MFG ID number
and product code (see the insert sheet included in the
literature package and cooktop installation instructions
for dimensions).
Cabinet side filler panels
are necessary to isolate the
unit from adjoining cabinets.
Cabinet side filler height
should allow for installation of
approved cooktop models
To reduce the risk of
personal injury and tip-
ping of the wall oven,
the wall oven must be
secured to the cabi-
net (s) by mounting
screws.
208/240 Volt junction box
for built-in oven.
Approx.
(7.5
36" Min.
(91.4 cm) Min.
Use 3/4" (1.9 cm) plywood, installed on
two runners, flush with toe plate. Base
must be capable of supporting 150
pounds (68 kg) for 27" models and 200
pounds (90 kg) for 30" models.
Cut an opening in wood base minimum 9"x
9" (23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armored cable to junction box.
4 1/2" (11.5 cm) Max.*
If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
27" (68.6 cm) 247/s'' (63.2 cm) Min. 231/2"(59.7 cm) Min. 27U4" (69.2 cm) Min.
Wall Oven 25W' (64.1 cm) Max. 28" (71.1 cm) Max.
30" (76.2 cm) 281/2'' (72.4 cm) Min. 27W' (69.2 cm) Min.
Wall Oven 29" (73.7 cm) Max. 23W' (59.7 cm) Min. 28" (71.1 cm) Max.
Figure 8- TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRIC BUILT-IN
OVEN WITH AN ELECTRIC COOKTOP MOUNTED ABOVE
7
Loading ...
Loading ...
Loading ...