Loading ...
Loading ...
Loading ...
11
5. Pull the rack assembly slightly forward until the front edge
drops and the sliding rails are on the rack guide.
To Remove Roll-out Rack
1. Push the sliding shelf in completely so that it is closed and
engaged with the slide rails.
2. Using 2 hands, lift up on the front edge of the rack assembly.
Slowly push the rack assembly to the back wall of the oven
so the front edge of the sliding shelf sits on the rack guides
on the side of the oven cavity. The front edge of the rack
should be higher than the back edge.
3. Using 2 hands, lift up the back of the rack assembly so that
the front and back are level on the rack guides.
4. Pull the rack assembly out.
To avoid damage to the sliding shelves, do not place more than
25 lbs (11.4 kg) on the rack.
Do not clean the roll-out rack in a dishwasher. It may remove the
rack’s lubricant and affect its ability to slide.
See the “General Cleaning” section for more information.
Meat Thermometer
On models without a temperature probe, use a meat
thermometer to determine whether meat, poultry and fish are
cooked to the desired degree of doneness. The internal
temperature, not appearance, should be used to determine
doneness. A meat thermometer is not supplied with this
appliance. Follow manufacturer's directions for using a meat
thermometer.
Oven Vent(s)
The oven vent(s) should not be blocked or covered since they
allow the inlet of fresh air into the cooling system. Also, the
bottom vent should not be blocked or covered since it allows the
inlet of fresh air into the cooling system and the outlet of hot air
from the cooling system. Blocking or covering vents will cause
poor air circulation, affecting cooking, cleaning and cooling
results.
Cooking Functions
The Home Tab allows for easy access to the Most Used Modes,
Gourmet Guides, Probe, and My Creations.
1. Touch the MODES tab to move to the Modes menu.
2. From the Modes menu, select one of the following options:
Bake, No Preheat 1-rack Cooking, Broil, Keep Warm,
Convect Bake, Convect Bake Rapid Preheat, Convect Broil,
Convect Pastry, Convect Roast, Convect Slow Roast, True
Convect, and Proof.
3. After touching the desired mode, you will move to the
temperature screen or touch the Temperature tab to move to
the Temperature screen.
4. The default temperature and its range is shown in the
following table. To change the temperature, move the slider to
enter a desired cooking temperature or touch the -5ºF (-1ºC)
or +5ºF (+1ºC) buttons.
A. “V” cutout
B. Rack guide
A. “V” cutout
B. Rack guide
A. Sliding shelf
B. Slide rails
C. Rack
A
B
A
B
B
A
C
Single and Double Oven
A. Control panel
B. Oven vent
C. Single oven or upper double oven
G. Bottom vent
Double Oven
D. Upper oven
E. Oven vent
F. Lower oven
G. Bottom vent
E
D
F
B
A
C
G
Loading ...
Loading ...
Loading ...