Loading ...
Loading ...
Loading ...
12
PROBLEM CAUSE CORRECTION
Longer sound
levels when
compressor
comes on.
• Appliance operates at
higher pressures during
the start of the ON cycle.
• This is normal. Sound will level off or
disappear as appliance continues to run.
Popping or
cracking sound
when compres-
sor comes on.
• Metal parts undergo
expansion and contraction,
as in hot water pipes.
• This is normal. Sound will level off or
disappear as appliance continues to run.
Bubbling
or gurgling
sound, like
water boiling.
• Refrigerant (used to cool
the appliance) is circulating
throughout the system.
• This is normal.
Vibrating or
rattling noise.
• Appliance is not level. It
rocks on the oor when it
is moved slightly.
• Floor is uneven or weak.
• Appliance is touching
the wall.
• Level the unit. Refer to ”Leveling” in the
First Steps Section.
• Ensure oor can adequately support appliance.
Level the appliance by putting wood or metal
shims under part of the freezer.
• Re-level the appliance or move appliance
slightly. Refer to “Leveling” in the First
Steps Section.
Alarm is
sounding
from the con-
trol panel
• Look on the control panel to
determine which indicator
light is on (High Temp,
Power Fail, or Door Ajar).
• Press the “set” button to acknowledge the
alarm or close the door if the door ajar
indicator is shown.
WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture
forms on
inside appli-
ance walls.
• Weather is hot and humid.
• Door may not be
seating properly.
• Door is opened too often
or too long.
• The rate of frost buildup and internal
sweating increases. This is normal.
• See “DOOR PROBLEMS”.
• Open door less often.
ODOR IN APPLIANCE
Odor in
appliance.
• Interior needs to be
cleaned.
• Foods with strong odors
are in the appliance.
• Clean interior with sponge, warm water,
and baking soda.
• Cover the food tightly.
DOOR PROBLEMS
Door will
not close.
• Appliance is not level. It
rocks on the oor when it
is moved slightly.
• Floor is uneven or weak.
Appliance rocks on oor
when it is moved slightly.
• This condition can force the cabinet out
of square and misalign the door. Refer to
“Leveling” in the FIRST STEPS Section.
• Level the oor by using wood or metal
shims under the appliance or brace oor
supporting the appliance.
LIGHTING PROBLEMS
Interior light
bulb is not on.
• No electric current is
reaching the appliance
• Control is in Sabath mode
(Sb is displayed on control)
• See “APPLIANCE DOES NOT RUN”.
• Depress TEMP MODE key and CONTROL
LOCK key for 3 seconds.
Power Avail-
able Light is
not on
• LED may be burned out.
• No electric current is
reaching the appliance.
• The door has been left open
for more than 5 minutes.
• Contact a qualied service dealer.
• See “Appliance does not run” in
“APPLIANCE OPERATION”.
• Close the door.
BEFORE YOU CALL
Loading ...