Loading ...
Loading ...
Loading ...
www.BISSELL.com
12
Maintenance: Brush Roll
Turn the foot over and locate the
brush roll cover tab.
Make sure the vacuum is OFF. Press
the vacuum foot release button to
disconnect it from the vacuum.
1
2
Grasp the brush roll and remove from
the foot window area.
Slide the tab down to un-lock and lift
the corner cover piece.
3
4
BRUSH ROLL RESET:
If larger debris becomes lodged
in the foot of the unit and the
brush roll shuts off, turn the unitoff
and remove the obstruction. Wait
approximately 15 seconds for the
motor to cool down before turning
back on. Brush will function again
after allowing time to cool down.
Clean your pet brush roll as needed
and place back into the foot.
5
NOTE: Make sure the brush roll cover tab is locked back into place to prevent
breaking or faulty brush roll.
WARNING
Do not operate your BOLT® Lithium with damp or wet filters or without filters in place.
Loading ...
Loading ...
Loading ...