Loading ...
Loading ...
Loading ...
73
uuIndicatorsu
Continued
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
System
Message
Indicator
●
Comes on for a few seconds when you
turn the ignition switch to ON (w
*1
, then
goes off.
●
Comes on along with a beep when a
problem is detected. A system message on
the i-MID appears at the same time.
●
While the indicator is on, press the
(display/information) button to
see the message again.
●
Refer to the Indicators information in
this chapter when a system message
appears on the i-MID. Take the
appropriate action for the message.
●
The i-MID does not return to the normal
screen unless the warning is canceled,
or the button is pressed.
—
Turn Signal
and Hazard
Warning
Indicators
●
Blink when you operate the turn signal
lever.
●
Blink along with all turn signals when you
press the hazard warning button.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs
P. 365, 367
—
High Beam
Indicator
●
Comes on when the high beam headlights
are on.
— —
Lights On
Indicator
●
Comes on whenever the light switch is on,
or in AUTO
*
when the exterior lights are
on.
●
If you remove the key from the ignition
switch
*1
while the exterior lights are on,
a chime sounds when the driver's door
is opened.
—
Fog Light
Indicator
*
●
Comes on when the fog lights are on.
— —
* Not available on all models
Loading ...
Loading ...
Loading ...