Loading ...
Loading ...
Loading ...
Page:
10
User Manual:
WASH PROGRAMS:
QUICK - Suitable to wash lightly soiled clothes.
HEAVY- Delicate wash, designed especially for heavy fabrics. This is normally the most commonly
used wash program.
JEANS- Suitable program to wash heavily soiled, durable clothes.
AIR DRY- Designed to dry clothes without heat, with a similar result of being dried in a room.
EASY IRON- Thorough wash program that leaves the clothes more moist than the other programs,
helping to ensure clothes are less wrinkled.
PROCEDURE FOR SETTING A SINGLE WASH:
1. Load your washing into the machine.
2. Switch on the washing machine with the POWER button.
3. Use the PROGRAM button to select the desired wash program, which will be indicated
by a solid light.
Note: The Heavy wash program is the most common wash program used and is a good all
purpose washing program.
4. Press the WATER LEVEL button to select your desired water level, where 1 is a small load
and 6 is a full load.
5. Press the FUNCTION button to select your desired procedure (Wash, Rinse, Spin), where
you may select a single procedure alone, or any two combined.
6. Press the TEMPERATURE button to select your desired water temperature (Cold, Warm,
Hot).
7. Press the START/PAUSE button to start the wash program. The LED panel will indicate
the remaining time for your wash program and begin to count down.
Note: The washing machine lid must be closed for it to operate.
Program: Wash Time: Rinse Time: Spin Time: Total Time:
Page:
11
User Manual:
SPECIAL FEATURES:
→ DELAY START TIME
The DELAY button allows you to preset the start time of your washing machine. After selecting your
desired wash program and functions (as described on page 10), press the DELAY button to select the
number of hours time you’d like to start your wash program in (i.e. 1 to 48 hours). With each press of the
button the display will increase by 1 hour, from 24 it will increase by 6 hours with each press. After you
reach 48 hours, it will reset to display the remaining wash time for the program you have selected.
Once you’ve set your desired delay time, press the START/PAUSE button. The Delay indicator light will
begin to ash in isolation and will countdown to your desired start time.
→ CANCELING OR ALTERING A DELAY TIME
To cancel a set delayed start time, simply press the POWER button to reset the machine.
→ CHILD LOCK
To activate the child lock feature, simply press the FUNCTION and WATER LEVEL buttons at the same
time. Repeat this process to deactivate the child lock.
→ AUTOMATIC POWER SHUT-OFF
If the machine isn’t used within the rst 10 minutes after being powered on it will automatically power
o. This also occurs after completing a wash cycle, where the machine will sound a buzzer 6 times and
then automatically power o.
→ AUTOMATIC ADJUSTMENT FOR IMBALANCE
If the laundry is placed unevenly within the drum, it is likely to cause vibration during spinning. Your
Esatto washing machine has a built in function of adjusting for the imbalance. When the machine is
adjusting for any imbalance, the rinse light will ash and normally takes around 1 minute. In the event
that the washing machine cannot adjust for the imbalance, an alarm will sound.
→ FUZZY LOGIC FUNCTIONALITY
These machines oer the advantages of performance, productivity, simplicity, productivity,and less cost.
Sensors continually monitor varying conditions inside the machine and accordingly adjust operations for
the best wash results. Your Esatto machine’s fuzzy logic controls the washing process including water
intake, water temperature, wash time, rinse performance and spin speed, optimising for the best wash
results.
During the fuzzy logic testing process, the water circulation lights will ash and the LED time display will
show “--”.
→ POWER FAILURE MEMORY FUNCTION
If the power supply is cut o suddenly during operation, the machine remembers the current operation
state. When the power supply is restored, the machine returns to former operation state automatically.
Loading ...
Loading ...
Loading ...