Loading ...
Loading ...
Loading ...
19
* depending on the model
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
After use
Never leave the reflector in the water between each
use.
• Place the thermostat in the min. position before unplug.
• Unplug the appliance and let it cool down before remo-
ving the grill plate or the grid (4*), the heating element
(5) and the reflector (7) - D.
• Never close over the protection lid (2) if the ap-
pliance is still hot - D.
• The grill plate or the grid (4*), the reflector (7), the base
of the appliance (8) and the protection lid (2) can be
cleaned with a sponge, hot water and washing up liquid
- D.
• To remove the grill plate or the grid (4*), unlock it from
the appliance using the handles (3) - D.
• To remove the protection lid (2) :
- Take hold of the handle, lift the protection lid (2) and
then incline it towards you - F.
- When the identical shapes in the hinge axis and the hole
in the lid (9) are opposite one another, the lid may be re-
moved by slightly extending the lid towards the outside -
G.
Do not use a metal scouring pad or scouring powder.
To clean the grill plate or the grid (4*), the sponge can be
replaced by a brush.
The heating (5) coil is not to be cleaned. If it is really dirty,
wait until it has cooled down and wipe with a dry
cloth - D.
Do not immerse the appliance or power cord in water.
Do not place the hot plate* under water or on a fragile
surface.
Storing
• Check that the appliance is cooled and disconnected be-
fore stowing away.
• Place the heating element (5) on the reflector (7) then
insert the control panel (6) properly in its place - D.
• Put the power supply cord (10) in the compartment pro-
vided for this purpose behind the control panel (6), and
then store it in the reflector - H.
• Place the grill plate or the grid (4*) on the appliance and
lock it in place using the two handles (3) - D.
• Put the protection lid (2) back in place by extending it
slightly, taking care to match up the identical shapes in
the hinge axis and the hole in the lid (9) - G.
• Remove the appliance from the two supports (13*) and
fold up the storage shelf (12*) as shown in the drawings
- E4 - E3 - E2 - E1.
• Place the storage shelf (12*) upside down on top of the
appliance (opposite of C).
• Close the protection lid (2): take hold of the handle, lift
the protection lid (2) and then pull towards you. - F.
• Lock the protection lid in place (2) by closing the two clips
(1) (opposite of - A1).
• The appliance may be stored vertically - J.
Do not leave the appliance in direct sunlight or outside
in winter.
EN
For U.K. users only:
If you have any problems or queries, please contact our Customer Relations team on :
HELPLINE 0845 602 1454 – UK, (01) 677 4003 - ROI – www.tefal.co.uk
This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with
the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
Loading ...
Loading ...
Loading ...