Loading ...
Loading ...
Loading ...
8
Operating modes
An activated carbon lter must be installed to
bind odours in circulating-air mode (see
”Removing and installing the grease lters”).
The complete installation set as well as the
replacement lters are available from specialist
outlets, customer service or the Online Shop.
The accessory number can be found at the
end of the operating instructions.
Appliance dimensions Circulating air
Switching the electronic control to
circulating air mode
The extractor hood must be connected and
switched o.
Simultaneously press buttons
-
and
r
until ã is displayed.
Repeatedly press buttons
-
and
r
to
switch the electronic control back to exhaust air
mode by (display #).
The extractor hood can be used in exhaust
air and circulating air mode. The standard
setting is exhaust air mode.
Exhaust-air mode
The air which is drawn in is cleaned by the
grease lters and conveyed to the exterior by a
pipe system.
Appliance dimensions Exhaust air
Circulating-air mode
The air which is drawn in is cleaned by the
grease lters and an activated carbon lter and
conveyed back into the kitchen.
min.
126
min.
450
min.
400
min. 580
max 1.030
min.
126
min.
450
min. 580
max 1.030
Loading ...
Loading ...
Loading ...