Loading ...
Loading ...
Loading ...
STAINLESS STEEL OR ALUMINIUM OVENS
Clean the oven door with a damp cloth or sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials
as they can damage the oven surface. Clean the
oven control panel with the same precautions.
CLEANING THE DOOR GASKET
Regularly do a check of the door gasket. The door
gasket is around the frame of the oven cavity. Do
not use the oven if the door gasket is damaged.
Contact an Authorised Service Centre.
To clean the door gasket, refer to the general
information about cleaning.
REMOVING THE SHELF SUPPORTS
To clean the oven, remove the shelf supports.
CAUTION! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
side wall.
2. Pull the rear end of the shelf support away from
the side wall and remove it.
2
1
Install the removed accessories in the opposite
sequence.
The retaining pins on the telescopic
runners must point to the front.
CATALYTIC FAN COVER
CAUTION! Do not clean the catalytic
surface with oven sprays, abrasive
cleaning agents, soap or other
cleaning agents. This will damage the
catalytic surface.
Before you activate the catalytic
cleaning remove all the accessories
from the oven.
The fan cover with a catalytic coating is self-
cleaning. It absorbs fat which collects on the walls
while the appliance operates.
To support the self-cleaning procedure, heat the
empty oven on a regular basis.
1. Clean the oven floor with warm water and
washing up liquid, then dry it.
2. Set the function
.
3. Set the oven temperature to 250 °C and let the
oven operate for 1 hour.
4. When the oven is cool, clean it with a soft and
wet sponge.
Spots or discolouration of the catalytic surface
have no effect on catalytic properties.
CLEANING THE OVEN DOOR
The oven door has two glass panels. You can
remove the internal glass panel to clean it.
CAUTION! Do not use the appliance
without the internal glass panel.
The direction in which you open the
door depends on your oven model.
You open the door from the right side
in some models and from the left side
in others.
1. Press the buttons at the sides of the door trim
(A) on the upper cover and pull it upwards to
remove it.
A
2. Hold the inner glass B tightly with both hands
and slide it upwards to remove it from its initial
position.
Make sure that you tightly hold glass B to
prevent the glass from falling.
20
Loading ...
Loading ...
Loading ...