Loading ...
Loading ...
Loading ...
EN
27
Refined Salt and Rinse Aid
Only use products which have been specifically designed
for dishwashers. Do not use table salt or industrial salt.
Follow the instructions given on the packaging.
If you are using a multi-function product, we recommend
that you add salt in any case, especially if the water is hard or
very hard.
(Followtheinstructionsgivenonthepackaging.)
If you do not add salt or rinse aid, the LOW SALT* and
LOW RINSE AID
* indicator lights will remain lit.
Measuring out the refined salt
TheuseofsaltpreventstheformationofLIMESCALEonthedishes
and on the machine’s functional components.
•Itisimportantthatthesaltdispenserbeneverempty.
•Itisimportanttosetthewaterhardness.
The salt dispenser is located in the lower part of the dishwasher
(seeDescription)
and should be filled:
• WhentheLOWRINSEAIDindicatorlightinthecontrolpanel
is lit *;
• Whenthegreenfloat* on the cap of the salt dispenser is no
longer visible.
• Seeautonomyinthewaterhardnesstable.
1.Removethelowerrackandunscrewthe
containercap(anticlockwise).
2. Only the first time you do this: fill the water
dispenser up to the edge.
3.Position the funnel
(seefigure)
and
fill the salt container right up to its edge
(approximately1kg);itisnotunusualfora
little water to leak out.
4.Removethefunnelandwipeanysaltresidueawayfromthe
opening; rinse the cap under running water and then screw it on.
It is advisable to perform this procedure every time you add salt
to the container.
Make sure the cap is screwed on tightly, so that no detergent can
getintothecontainerduringthewashcycle(thiscoulddamage
the water softener beyond repair).
Whenever you need to add salt, we recommend carrying out
the procedure before the washing cycle is started.
Setting the water hardness
For perfect water softener operation, it is essential that the
adjustment be based on the water hardness in your house. Ask
your local water supplier for this information. The factory setting
is for medium water hardness.
•SwitchthedishwasheronusingtheOn/Offbutton.
•SwitchitoffusingtheOn/Offbutton
•HolddownbuttonP for 5 seconds until you hear a beep.
•SwitchitonusingtheOn/Offbutton
•Thecurrentselectionlevelnumberandsaltindicatorlightflash
(flashingindicatoronly).
•Press button P to select the desired hardness level
(see
hardness table).
•SwitchitoffusingtheOn/Offbutton
•Settingiscomplete!
Even if using multi-functional tablets, the salt dispenser should
still be filled.
Measuring out the rinse aid
Rinseaidmakesdish DRYINGeasier.Therinseaiddispenser
should be filled:
• WhentheLOWRINSEAIDindicatorlightonthepanel/display
is lit *;
• Whenthedarkopticalindicator* on the dispenser door “D”
becomes transparent.
1. Open the dispenser
“D” by pressing and pulling up the tab
on the lid;
2.Carefullyintroducetherinseaidasfarasthemaximumreference
notch of the filling space - avoid spilling it. If this happens, clean
the spill immediately with a dry cloth.
3.Presstheliddownuntilyouhearaclicktocloseit.
NEVER pour the rinse aid directly into the appliance tub.
Rinse-aid dispenser setting
If you are not completely satisfied with the drying results, you
can adjust the quantity of rinse aid used.
•SwitchthedishwasheronusingtheOn/Offbutton.
•SwitchitoffusingtheOn/Offbutton
•PressbuttonP three times - a beep will be heard.
•SwitchitonusingtheOn/Offbutton
•Thecurrentselectionlevelnumberandrinseaidindicatorlight
flash(flashingindicatoronly).
•PressbuttonP to select the level of rinse aid quantity to be
supplied.
•SwitchitoffusingtheOn/Offbutton
•Settingiscomplete!
IftherinseaidlevelissettoZERO(ECO),norinseaidwillbe
supplied.TheLOWRINSEAIDindicatorlightwillnotbelitifyou
run out of rinse aid.
Amaximumof4levelscanbesetaccordingtothedishwasher
model. The factory setting is for a medium level.
•Ifyouseebluishstreaksonthedishes,setalownumber(1-2).
•Iftherearedropsofwaterorlimescalemarksonthedishes,
setahighnumber(3-4).
(°dH = hardness measured in German degrees - °f =hardness
measuredinFrenchdegrees–mmol/l=millimolesperlitre)
* Only available in selected models.
M
A
X
Water Hardness Table
Average autonomy
salt dispenser with 1
wash cycle per day
level °dH °fH mmol/l months
1 0 - 11 0 - 20 1,1 - 2 5 months
2 12 - 17 21 - 30 2,1 - 3 3 months
3 17 - 34 31 - 60 3,1 - 6 2 months
4
*
34 - 50 61 - 90 6,1 - 9 2/3 weeks
For values between 0°f and 10°f, we do not recommend the use
of salt. * this setting may cause a slight increase in the duration
of the cycles.
Loading ...
Loading ...
Loading ...