Loading ...
Loading ...
Loading ...
The door shelves
To permit storage of food packages of various sizes
the central door shelf can be adjusted in height.
To do this proceed as figure.
For more thorough cleaning, the top door shelf and
the bottle shelf can be removed by pulling them in
the direction of the arrows, then refitting them in
position.
While in operation the -star compartment
becomes progressively covered with frost.
This frost, which acts as an insulator and thus
prevents the cold from reaching the food should be
removed whenever the thickness of the frost
exceeds 1/4".
To carry out complete defrosting proceed as follows:
1. Push the conveyor completely in.
2. Place a tray on the upper shelf of the refrigerator
under the drain hole of the conveyor.
3. Remove any food from inside the -star
compartment, wrap it in several sheets of
newspaper and store in a cool dry place.
4. Push the button at the centre of the thermostat
knob. To accelerate defrosting, place a bowl of
hot water inside the compartment (with a piece of
cardboard underneath the bowl as protection).
5. When defrosting is completed, dry thoroughly and
remove the water collected in the tray.
The refrigerator starts operating automatically
following defrosting.
After letting the appliance run for at least half an
hour, replace the previously removed food into the
-star compartment.
When defrosting it is not necessary to remove the
foods from the inner door and the refrigerator
compartment.
Defrosting
7
Important
A temperature rise of the frozen food packs
during defrosting may shorten their storage
life.
Never use sharp metal tools to scrape off
frost from the evaporator as you could dam
age it beyond repair.
Loading ...
Loading ...
Loading ...