Loading ...
Loading ...
Loading ...
38
BDP-S6700
4-579-670-42(1)
master page=left
E:\SONY
DVD\SD160010\4579670421_GB\070ADD.fm
, The connection registration
information has been erased. Perform
the connection operation again.
There is no sound, the sound skips or
fluctuates, or the connection is lost.
, Move the Bluetooth device closer to
the player.
, Make sure the player is not receiving
any interference from a Wi-Fi
network, other Bluetooth device, other
2.4 GHz wireless device, or
microwave oven.
, Check that the Bluetooth connection is
properly made between this player and
the Bluetooth device.
, Connect this player and the Bluetooth
device again.
, Keep the player away from metal
objects or surfaces.
The [Control for HDMI] function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] in
[HDMI Settings] is set to [On]
(page 32).
, If you change the HDMI connection,
turn the player off and on again.
, If power failure occurs, set [Control
for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 32).
, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for
HDMI] function.
– the connected component’s setting
for the [Control for HDMI] function
is correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the mains lead, or a power
failure occurs, try the following:
1Switch the input selector of the
AV amplifier (receiver) so that the
picture from the player appears on
the TV screen.
2Set [Control for
HDMI] in [HDMI Settings] to [Off],
then set [Control for HDMI] in
[HDMI Settings] to [On] (page 32).
Refer to the instruction manual
supplied with the AV amplifier
(receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[Linked to TV-off] in [HDMI Settings]
are set to [On] and [Valid] (page 32).
Control for HDMI (BRAVIA
Sync)
Loading ...
Loading ...
Loading ...