Loading ...
Loading ...
Loading ...
Install the door handle {someKenmore Elite models)
IMPORTANT." Do not scratch the front panel during this
procedure.
1. Remove the door handle and hardware bag containing
the setscrews and Allen wrench from the cardboard box.
2. Start set screws in handle.
3. Place handle on mounting studs.The handle should
appear as a "smile" when installed, with the set screws
facing down.
Push the door handle tightly against the door. Insert the
short end of the Allen wrench into the setscrews.
Tighten the setscrews 1/4 turn past snug. Retain Allen
wrench with Installation Instructions.
stud
handle
setscrew
(in bottom of _
handle)
..._.)
wrench
Install the door handle (KenmorePROTM models)
IMPORTANT.' Do not scratch the front panel during this
procedure.
1.Remove the door handle assembly from the upper
dishrack of the dishwasher.
2. Remove and discard the handle packaging. Be sure to
retain the handle installation instructions and mounting
hardware.
3. Install the door handle i _)
per handle installation
instructions provided
with the handle
assembly.
Choose attachment option
Excessive Weight Hazard-
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Using two or more people, stand the dishwasher up.
Option 1, Countertop attachment
The dishwasher must be secured to the cabinet.There are
two brackets that can be
attached to the countertop if it brackets
is wood, laminate or another
similar surface. If your
countertop is marble, granite
or other hard surface, the
brackets may be moved to the
sides of the dishwasher.
NOTE: Do not attach the
dishwasher, this will be done front vent
later, model shown
Option 2, Dishwasher side attachment
(for marble, granite or other hard surface
countertop)
1. To remove the brackets from the top, flatten tab at back
of brackets with pliers, and pull the brackets out of the
slots.
/
tabs
2. Break offthe end of the bracket along the scored line.
score
\
3. With another person holding the dishwasher to prevent
it from tipping, open dishwasher door, and place towel
over pump assembly and spray arm of dishwasher.This
will prevent screws from falling into pump area when
securing dishwasher to cabinet.
4. Push the plastic buttons out of the side of the tub.
NOTE: Save the buttons to cover the holes after
dishwasher is installed.
Push bracket into slot on the side of dishwasher, and
bend tab in towards the side of the dishwasher so that
it keeps the bracket in place.
NOTE: Do not attach the dishwasher, this will be done
later.
bend i
tabs
11
Loading ...
Loading ...
Loading ...