Loading ...
Loading ...
Loading ...
3-105
03
Turn signals and lane change
signals
To signal a turn, push down on the
lever for a left turn or up for a right
turn in position (A).
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
Onetouch turn signal function
To activate the One Touch Turn Signal
function, push the turn signal lever up
or down to position (B) and then
release it.
The lane change signals will blink 3,
5 or 7 times.
You can activate or deactivate the
One Touch Turn Signal function or
choose the number of blinking (3, 5,
or 7) from the User Settings mode
(Light) on the LCD display.
For more information, refer to the
"LCD Display" in this chapter.
OHI046420N
• Do not place any accessories,
stickers or tint on the wind-
shield.
• Have the windshield glass
replaced from an authorized
dealer.
• Do not remove or impact relat-
ed parts of the Smart High
Beam system.
• Be careful that water doesn’t
get into the Smart High Beam
unit.
• Do not place objects on the
dashboard that reflects light
such as mirrors, white paper,
etc.The system may malfunc-
tion if sunlight is reflected.
• At times, the Smart High
Beam system may not work
properly, always check the
road conditions for your safe-
ty. When the system does not
operate normally, manually
change between the high
beam and low beam.
WARNING
Loading ...
Loading ...
Loading ...