Loading ...
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
■ Brackets (2)
■ 2¹⁄₂" (6.4 cm) clamping screws (4)
■ #8 x ³⁄₈" (9.5 mm) sheet metal screws (4)
Parts needed
■ A UL listed or CSA approved strain relief
■ UL listed wire connectors
Check local codes. Check existing electrical supply. See
“Electrical Requirements” section.
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
Location Requirements
Make sure you have everything needed for correct installation. It
is the responsibility of the installer to comply with the installation
clearances specified in these instructions.
IMPORTANT: Observe all governing codes and ordinances.
When installing cooktop, use minimum dimensions given.
■ To eliminate the risk of burns or fire by reaching over the
heated surface units, cabinet storage space located above
the surface units should be avoided. If cabinet storage is to
be provided, the risk can be reduced by installing a range
hood that projects horizontally a minimum of 5" (12.7 cm)
beyond the bottom of the cabinets.
■ It is the installer’s responsibility to comply with installation
clearances specified on the model/serial rating plate. The
model/serial rating plate is located on the underside of the
cooktop burner box.
30" (76.2 cm) cooktop model/serial rating plate location
(models GCI3061, ICI500, KICU500)
■ Check the cooktop base for an approved installation label.
Verify approved oven model number. If you don't find this
label, your cooktop should not be used over a built-in oven.
Contact your dealer to confirm that your cooktop is
approved.
■ Use the countertop opening dimensions that are given with
these Installation Instructions. Given dimensions are
minimum clearances and provide 0" (0 cm) clearance.
■ Grounded electrical supply is required. See “Electrical
Requirements” section.
Product Dimensions
30" (76.2 cm) Cooktop
■ Tape measure
■ Flat-blade screwdriver
■ Phillips head screwdriver
■ Hand or electric drill
■ Level
■ Marker or pencil
■ Pliers
■ ¼" drill bit
■ Jigsaw
A. Model/serial rating plate location
Models GCI3061 Model ICI500 Models KICU500
A. 21
⁵⁄₁₆
" (54.1 cm)
B. 3
0⁵⁄₁₆
" (77.0 cm)
C. 2
³⁄₈
" (6.0 cm)
A. 20
¹⁄₈
" (51.0 cm)
B. 3
0⁵⁄₁₆
" (77.0 cm)
C. 2
³⁄₈
" (6.0 cm)
A. 21
⁵⁄₁₆
" (54.1 cm)
B. 3
0³⁄₄
" (78.2 cm)
C. 2
³⁄₈
" (6.0 cm)
A
C
A
B
Loading ...
Loading ...
Loading ...