Loading ...
Loading ...
Loading ...
23
ADDITIONAL CAPABILITIES
Adding a Drive
You can share a USB hard drive or flash drive to your network via
your Router’s USB port. Once connected, you can share files and
music with other computers and devices within your network.
Plug your USB hard drive into the USB port on the back of your Router.
You can manually check the status of your shared drive by visiting the
USB Print and Storage Manager. If you have difficulty sharing a drive on
your network, please see the “Troubleshooting” section of this manual.
A few USB hard disks require more power than the Router’s USB port
provides. In these cases, you may notice the drive failing to come on
or remaining on for a short time. If your disk has an optional power
supply, please use it while the disk is attached to your Router.
Adding a Printer
You can add a printer to your network via your Router’s USB port. Once
connected, you can print from various computers and wireless devices within
your network.
Plug your printer’s USB cable into the USB port located on the back of
your Router.
You can manually check the status of your printer by visiting the USB Print and
Storage Manager, found under the Belkin icon displayed in your system tray
(Windows) or menu bar (Mac). If you have difficulty sharing a printer on your
network, please see the “Troubleshooting” section of this manual.
Note: Each computer that will use the printer must have both the Belkin
software and the printer’s driver installed. If the print driver is not installed, you
will be asked to install it by the Belkin USB Print and Storage Manager.
Loading ...
Loading ...
Loading ...