Loading ...
Loading ...
Loading ...
Installation
35
To avoid scratching the fume
deflector, do not remove the
protective film between the fume
deflector and the casing until the
hood has been placed in the
cabinetry
Installation of the hood is carried out
without the grease filter placed in
position. If the grease filter has
already been fitted, then it should be
removed (see “Cleaning and care”).
When installing a 31¹/₂“ or 35⁷/₁₆”
(80 or 90cm) wide hood in a 23⁵/₈“
(60cm) wide wall unit while the fume
deflector is pulled out, unscrew the
two fume deflector spring mounts.
Lift the appliance up into the
cabinetry from below until the spring
mounts at the side engage in the
brackets.
Push the hood back against the
spacer strip.
Note for dismantling the hood:
Removing the screws on the left and
right inside the cabinetry releases the
spring mounts, allowing the appliance
to be removed from the unit.
Loading ...
Loading ...
Loading ...