Loading ...
Loading ...
Loading ...
＊
＊
The scan function samples all
stations with strong signals on the
selected RDS category. To activate it,
press and release the SCAN button.
You will see SCAN in the display.
The system will scan for a station
with a strong signal in the selected
RDS category. You will also see the
selected RDS category name
blinking while searching it. When it
finds one, it will stop and play that
station for about 10 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
If the system does not find a station,
‘‘NOTHING’’ will be blinking for
about 5 seconds, then the system
goes back to the last selected station.
You can use the RDS program
search or scan function even if the
PS name display function is off. In
this case, the display shows a
frequency in place of a PS name.
Press the MENU button to display
the sound settings. Turn the selector
knob to select an appropriate setting:
bass, treble, fader, balance, SUBW
(subwoofer) and SVC (speed-
sensitive volume compensation).
Press the selector (ENTER) knob to
enter the setting, then turn the
selector knob to adjust the setting.
If equipped:
RDS Program SCAN
Adjusting the Sound
Playing the FM/AM Radio (Models without navigation system)
142
Selector knob adjustable
direction is shown.
FADER is selectable.
０７／０８／０６ １２：２６：３５ ３１ＴＥ０６００ ０１４７
2008 Accord Coupe
Table Of Contents
Main Menu
Loading ...
Loading ...
Loading ...