Loading ...
Loading ...
Loading ...
Care and maintenance
How to dismantle parts
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
NOTE
•
Not all bulbs will t your refrigerator.
Be sure to replace the bulb will one of the same size, shape and wattage.
•
The dispenser lights are LEDs that can not be changed.
NOTE
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
To remove a shelf, push the shelf to the left ,
lift the left part of the shelf a bit , lift the right
part up , and take it out.
Lift the door rack holding both sides
and
pull it out
.
Separate the lamp by pulling it out
while slightly
pressing
and rotating
the lamp cover.
Turn the bulb counterclockwise. Use a 40-watt bulb
(max.) which
can be purchased at a service
center.
24
To remove the lamp cover, press the protrusion under the lamp cover to the front and
then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and can be
purchased at a service center.
Lamp in
refrigerator
compartment
Separate the bin ( ) to upward.
Separate the upper rack of the refreshment
center and then pull out the refreshment
center cover
( )
.
The refreshment center can be removed
by pulling it upwards.
Refreshment
center
•
Be sure to remove parts from the refrigerator door when removing the vegetable
compartment,
snack drawer and refreshment center cover.
NOTE
Loading ...
Loading ...
Loading ...