Loading ...
Loading ...
Loading ...
www.bissellcommercial.com 855.544.7336
Assembly
5
8. 9.
1. Unlock the vacuum cover from the base of
the vacuum to confirm a bag is in place.
2. To insert a new bag: Open the bag and
make sure to pull on the sides of the bag
to “puff” it up.
3. Slide the cardboard tag on the bag into
the slots within the canister until bag is
secure.
4. Insert the end of the hose into the vacuum
intake and turn it clockwise to secure
the hose.
5. Attach the extension wand to the opposite
end of the hose. Extend the wand by
pushing on the yellow button on the wand
and pulling the extension out.
6. Attach the preferred accessory tool to the
end of the extension wand by placing the
small end of the extension wand into the
accessory tool. (Please note the accessory
tools can be used without the extension
wand and by attaching directly to the
end of the hose). The crevice tool stores
onboard below the power cord wrap.
7. Locate the yellow power cord and plug
one end into the socket located at the top
of the machine near the handle.
8. Place a section of the plug underneath the
small clamp near the handle.
9. Place a small section of the cord
(about 4-5 inches from the unit) into
the cord lock.
10. If you are ready to vacuum plug cord into
electrical outlet and turn vacuum on. To
adjust the power level of the vacuum from
normal to low flip the switch next to the
on/off switch on the top of the vacuum
11. Use cord wrap on back of the vacuum if
you are storing the vacuum.
ATTENTION:
Some Berber carpets have
a tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may
aggravate this condition.
3. 6.
1. 2.
Loading ...
Loading ...
Loading ...