Loading ...
Loading ...
Loading ...
4
3 Plug in and switch on at the wall socket.
4 Switch the kettle on. The ‘power on’ neon will light up.
5 When the water boils the kettle will switch off automatically.
• If you are using the kettle for the first time, pour away the boiled
water and refill.
6 Lift the kettle from the base unit by the handle ensuring you hold
the kettle level.
• To re-boil, switch to ON again. If the kettle has just switched off
wait a minute or so before switching it back on again.
• If you do not put in enough water, or switch on the kettle when it
is empty, the safety cut-out will switch off the power
automatically. If this happens, refill and wait a few minutes for the
element to cool, then use as normal.
Filter removal
1 Open the lid.
2 Lift the filter upwards from its holder.
3 To refit the filter, slide it into the side wall guides of the filter
holder until it clicks into place.
WARNING: Unless the filter is fitted correctly, the kettle lid may
not close and lock securely.
Descaling
IMPORTANT: As this kettle is fitted with a concealed element it
must be descaled regularly. The frequency of descaling depends
on usage and the hardness of the water in your area.
Excessive scale can cause the kettle to switch off before boiling
and may damage the element invalidating the warranty.
It is essential that regular descaling takes place.
Remove hard scale using a proprietary descaling product
suitable for stainless steel kettles.
Alternatively use citric acid crystals (available from most
pharmacies) as follows.
1 Fill the kettle 3/4 full, boil, then unplug the kettle (remove the
cordless kettle from the base unit) and stand it in an empty sink
or bowl.
2 Add 50gm of citric acid crystals to the water gradually, then
leave the kettle to stand. Do not use a more concentrated
solution.
3 As soon as the effervescence subsides, empty the kettle and
rinse it thoroughly with cold water.
4 Wipe the outside of the kettle thoroughly with a damp cloth to
remove all traces of acid which may damage the finish.
IMPORTANT: Ensure that the electrical connections are
completely dry before using the kettle.
Cleaning
WARNING: Always disconnect the plug from the mains and allow
the kettle to cool before cleaning.
CAUTION: To prevent damage to the appliance do not use
alkaline cleaning agents when cleaning, use a soft cloth and a
mild detergent.
Wipe the outside with a damp cloth.
IMPORTANT: Do not use abrasive cleaners on the outside of the
kettle which may scratch the surface.
Whistle feature
B
• There is a switch
Â
on the cordless base of the product that
can switch the whistle on and off as desired.
THIS SECTION IS ONLY APPLICABLE FOR
CUSTOMERS IN UK AND IRELAND
REGISTERING YOUR TWO YEAR GUARANTEE
Your standard one year guarantee is extended for an additional
12 months when you register the product within 28 days of
purchase with Morphy Richards. If you do not register the
product with Morphy Richards within 28 days, your product is
guaranteed for 1 year. To validate your 2 year guarantee register
with us online at www.morphyrichards.co.uk
N.B. Each qualifying product needs to be registered with
Morphy Richards individually. Please refer to the one year
guarantee for more information.
YOUR ONE YEAR GUARANTEE
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference. Please quote the following information if the product
develops a fault. These numbers can be found on the base of
the product.
Model no.
Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should be
returned to the place of purchase for it to be replaced. If the
fault develops after 28 days and within 12 months of original
purchase, you should contact the Helpline number quoting
Model number and Serial number on the product, or write to
Morphy Richards at the address shown. You may be asked to
return a copy of proof of purchase. Subject to the exclusions
set out below (see Exclusions), the faulty appliance will then be
repaired or replaced and dispatched usually within 7 working
days of receipt. If, for any reason, this item is replaced during
the 1 year guarantee period, the guarantee on the new item will
be calculated from original purchase date. Therefore it is vital to
retain your original till receipt or invoice to indicate the date of
initial purchase. To qualify for the 1 year guarantee, the
appliance must have been used according to the instructions
supplied. For example, crumb trays should have been emptied
regularly.
KT102004MAUS Rev2_Morphy Richards 27/10/2014 16:36 Page 4
Loading ...
Loading ...
Loading ...