X8
X17
X8
X8
Parts List
Read through entire instructions before assembly.
After installation store instructions for future reference.
Caution:
* Wear saftey glasses during assembly and installion of the screen
* Select an appropriate area of a wall to mount the screen. Make sure the position
selected will not interfere with existing features of your room such as wall sockets,
switches, etc.
* Do not install the screen over an electric outlet or switch. Doing so creates a
serious fire hazard.
* For homes with stud-wall construction, use a stud finder or carefully measure
to determine where the studs are located in the wall. The screen must be
mounted to the studs. Never rely on gypsum board, drywall, or thin wall
materials to support the weight of the screen!
* Wash your hands before installing the screen material.
* Carefully open the package and lay out all the parts on a clean flat surface.
* Use extreme caution when unpacking the screen. Do not use knives or
sharp objects to open the boxes.
Care and Cleaning:
* Your new screen can be effectively cleaned with a soft cloth using mild
soap and water. Do not use harsh detergents, chemicals, distilled spirits
or petro-chemicals to clean the screen; doing so may result in severe
damage to the screen or the frame coating.
* If the felt covering on the frame gets dusty or covered with lint, use a
household vacuum cleaner with a brush or furniture cleaning attachment
to clean the felt. Using excessive amounts of water on the felt is not
recommended.
* Damage done to the screen or frame by improper cleaning voids the
warranty of the screen and frame.
Troubleshooting:
* Initially, there may be some wrinkles in the screen. If there are, do not worry.
Let the screen sit for a few days and the wrinkles will most likely come out on
their own. If they don’t, get a hair dryer. Do not use a heat or laminating gun.
Start on the lowest heat setting of the hair dryer. Hold the hair dryer 12” away
from the face of the screen material. Point the hair dryer towards the wrinkles
for approximately 2 minutes. The wrinkles may begin to look worse at first, then
all of a sudden they will begin to disappear. If this does not work at the low setting
then set your hair dryer at the medium setting and continue towards the high heat
setting until the wrinkles are removed. It is very important that you stay 12” back
so you do not ruin the screen material.
Fixed
Loading ...
Loading ...
