WED99HEDW User Manual

Loading ...

Using Your Dryer

1. Clean the lint screen

Clean the lint screen before each load. Pull the lint screen

straight up and out. Press tab down and open lint screen.

Rolllintoffthescreenwithyourngers.Pushthelintscreen

rmlybackintoplace.

IMPORTANT: Clean lint screen before each dryer use as a

screen blocked with lint will increase drying time.

WARNING:Toreducetheriskofre,electricshock,orinjuryto

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

2. Clean HybridCare™ Filter

Clean the HybridCare™ Filter when light

comesonafterevery5cycles.Openlter

door on bottom of the dryer and grab the

handletopulloutlter.Setlteronthedryerandpulloutlint

screenandfoampadonbottomoflter.Rolllintoffscreen

andfoampadwithngersandplacebackinlterandthen

lterbackinlterhousing.(Theremaybesomewaterinthe

lterandthisisnormal.)Foradditionalcleaninginformation,

see “Dryer Care.”

IMPORTANT: For best drying performance, clean

HybridCare™ Filter after every 5th load. Light will

resetafterlteriscleanedandloadedbackinto

lterhousing.

Loading ...

User Manual - Page 8