Loading ...
Loading ...
Loading ...
20
FAULT CODES
If the dishwasher malfunctions, it will display a fault code and beep. Check the following
table below to see if you can correct the fault yourself.
If the dishwasher still will not work, or shows any other fault code
1 Press
to turn the dishwasher off and wait a few minutes.
2 Press again to turn the dishwasher back on.
If the dishwasher still does not function and/or the problem persists, disconnect the
dishwasher from the power supply, turn the water supply off, then contact Fisher &
Paykel Customer Care with the fault code information.
FAULT
CODES AND
DESCRIPTIONS
POSSIBLE CAUSES WHAT TO DO
A20
Drain fault
Drain hose is
crimped or bent.
Check the drain hose and straighten if needed.
The waste water is
not draining out.
Ensure that the drain hose is connected in
accordance with the installation instructions.
The turbidity sensor
is dirty and requires
cleaning.
Gently clean the turbidity sensor with a soft
brush (ie toothbrush) to remove any buildup.
A10
No water
Water tap not
turned on.
Ensure the water is connected and turned on.
Press to restart the dishwasher.
Insufficient water
supply pressure.
Check household water pressure.
Water inlet hose is
crimped or bent, so
no or not enough
water gets to the
dishwasher.
Check the water inlet hose and
straighten if needed. Press to restart the
dishwasher.
Drain hose is not
connected correctly.
Ensure that the drain hose is connected in
accordance with the installation instructions.
Turbidity
sensor
Loading ...
Loading ...
Loading ...