Loading ...
Loading ...
Loading ...
Smart unlocking feature
The smart unlocking feature prevents you from locking yourself out of
the vehicle by unlocking the doors if the key is in the ignition and the
driver’s door is open/ajar when the vehicle doors were locked using the
power lock/unlock control.
The smart unlocking feature operates independent of the position of the
ignition.
Autolocking feature
The autolocking feature locks all vehicle doors when the following
conditions are met:
• All doors, including the liftgate, are closed.
• The brake is pressed while the ignition is in the 3 (ON) position.
• The transmission is in either a forward or reverse gear.
• The vehicle has a speed of 5 mph (8 km/h) or greater.
This feature relocks all doors if any door is opened, the brake is pressed
after all doors are closed again and the vehicle has a speed of 5 mph
(8 km/h) or greater.
Deactivating/activating the autolocking feature
For vehicles equipped with a message center, the autolocking feature
may be deactivated/activated by selecting the autolock function
(accessed by pressing the SETUP control). Press the RESET control to
turn the autolock function on or off. Refer to the Message center section
in the Driver Controls chapter for additional information.
For vehicles not equipped with a message center, the feature may be
deactivated by taking your vehicle to an authorized Ford dealer.
KEYLESS ENTRY SYSTEM
With the keyless entry keypad, you can:
• lock or unlock the vehicle doors without using the key,
• release the liftgate glass,
• enable or disable the autolock function, and
• add or delete a 5–digit personal user code.
Your vehicle has a factory set 5–digit code that operates the keyless
entry system. You can also program your own 5–digit personal entry
code. The factory-set code is located:
• on the owner’s wallet card in the glove compartment,
2006 Navigator (nav)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
179
Loading ...
Loading ...
Loading ...