Loading ...
Loading ...
Loading ...
13
EXPLANATION OF LIGHTS
Lights Operation Explanation of lights
The ON/OFF button is turned on The appliance performs a self-diagnosis
cycle, indicated by sequential ashing o
the lights
The appliance is on Flashing lights: the appliance is heating
up to make coee
Lights on steadily: the appliance is ready
to make coee
The lights ash rapidly: the tank is empty
or the appliance will not make coee
See section: “Troubleshooting”
The steam function is required Flashing light: the appliance is heating
up to deliver steam
Light on steadily: the appliance is ready
to deliver steam
Steam dial open Flashing lights: close the steam dial
High boiler temperature Flashing lights: Cool the boiler as descri-
bed in the corresponding section
TROUBLESHOOTING
Problem Cause Solution
No espresso coee is delivered No water in the tank Fill the tank
The holes in the lter holder are blocked Clean the lter holder spout holes
The tank has been inserted incorrectly
and the valves on the bottom are not
open
Press the tank down lightly to open the valves on
the bottom
Limescale in the water circuit Descale as described in the section “Descaling”
The espresso coee drips from
the edges of the lter holder
rather than the holes
The lter holder has been inserted incor-
rectly or is dirty
Attach the lter holder correctly and rotate rmly
as far as it will go
Attach the lter holder correctly and ro-
tate rmly as far as it will go
Have the espresso boiler gasket replaced by Custo-
mer Services
The holes in the lter holder spouts are
blocked
Clean the spout holes
The lter holder cannot be atta-
ched to the appliance
Too much coee has been placed in the
lter
Use the measure supplied and make sure you are
using the correct lter for the type of preparation
Loading ...