Loading ...
Loading ...
Loading ...
CLEANING & MAINTENANCE
8
Replace the light bulb with a Max. 15W illuminating lamp.
Please check the points below after maintenance:
(1) Is there any damage to the power lead?
(2) Can the power plug be inserted into the power socket correctly?
(3) Is the power plug and/or lead heating up?
Unplug the power and remove the lighting lamp shade on
the arrow as speciļ¬ed in the drawing.
Replace the old bulb with a new 15W bulb.
Replace the lamp shade and plug in the refrigerator.
1.
2.
3.
WARNING
Before replacing the light: Turn appliance off at the power point, then remove
the power cord from the outlet. This will make sure there is no chance of electric
shock.
Replacing the Interior light
lam p cov er
DEFROSTING
Heavy frost will effect the freezing process or internal temperature of the appliance and
increase the power consumption. Thus, defrosting is required if the frost is >4mm thick.
Defrosting is a manual process. Please follow these steps:
Switch off and disconnect the appliance.
Remove all food from the fridge.
Open the door and wait for the ice to defrost. Place a container under the freezer to
catch the melted ice.
When defrosting, a plastic scraper or plastic utensil may be used. Never use metal
instruments or electrical appliances to defrost the fridge.
To speed up the defrosting process, you can carefully place a bowl of hot water in the
freezing compartment and close the door.
When defrosting is complete, wipe down the inside of the fridge.
Replace the drawer and food before restoring power.
1.
2.
3.
4.
5.
6.
7.
Loading ...
Loading ...
Loading ...