Loading ...
Loading ...
Loading ...
INSTALLATION Part 3: Projector extension offset
Page 5
Use these holes to set the
projector to the correct offset
position for the Hitachi short
throw projector.
4 - To set the projector to the correct offset for perfect
alignment with the StarBoard, use the holes as shown
in the diagram (left), and set the upright part of the
projector frame extension approximately 690mm from
the edge of the frame (as shown).
5 - Once the projector frame extension is position in the
correct position, tighten the M8 socket head screw with
supplied allen key.
690mm
Loading ...
Loading ...
Loading ...