LINCOLN 2005 LINCOLN LS User Manual

Loading ...

Replacing headlamp bulbs - lowbeam

1. Remove the headlamp assembly

as described under Replacing

headlamp bulbs earlier in this

section.

2. Remove the four T20 torx head

screws holding the bulb retaining

cover on.

3. Turn the bulb counterclockwise

and remove it by pulling the bulb

straight out.

4. Disconnect the electrical connector.

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

Install the new bulb in reverse order, while also replacing the seal on the

bulb retaining cover. The kits for replacement seals are available at

Lincoln or Ford dealers.

Replacing HID headlamp bulb (if equipped)

The low beam headlamps on your vehicle use a “high intensity discharge”

source. These lamps operate at a high voltage. The bulb is replaceable.

When the bulb is burned out, the HID bulb must be replaced by your

dealer or a qualified technician.

Replacing headlamp bulbs - highbeam