Loading ...
Loading ...
Loading ...
12
WATER DRAINAGE INSTRUCTIONS
Using a portable dehumidifier requires that collected water be emptied frequently. Draining water from this unit
can be done in 2 different methods:
1. CONTINUOUS / GRAVITY DRAIN METHOD
Water can be automatically emptied into a floor drain by attaching the 20” continuous/gravity drain hose to the
continuous/gravity drain outlet. To use gravity to drain your portable dehumidifier, it must be installed on a level
surface or at least 12 inches above the ground, on a sturdy table or shelf unit. When using the function of continu-
ous/gravity drainage, your drain hose must be placed horizontally below the drainage hole. Avoid uneven ground
and folding the hose.
2. DRAIN BUCKET METHOD
In order for water to be collected in the drain bucket, the continuous/gravity drain hose assembly should be re-
moved from the drain outlet. Close the drain outlet with the rubber drain cover.
1. Remove the continuous drain cover and then attach the 20” con-
tinuous/gravity drain hose. Make sure the hose is securely fastened
to prevent leakage.
2. Direct the drain hose toward a drain or other suitable drainage
outlet. Make sure that there are no distortions with the hose that may
stop the water flow.
3. Select the desired humidity setting and fan speed on the unit for
continuous draining to start.
1. When the bucket is full, the Full indicator light will light. The com-
pressor and fan will turn off, the Full indicator will light, and a P2
code will be displayed.
2. It is recommended to turn the unit off before removing the drain
bucket.
3. Grip the left and right handles of the drain bucket securely and
carefully pull out the drain bucket. Do not put the drain bucket on
the floor because the bottom of the bucket is not even which may
4. Remove the water from the drain bucket and replace it back to
the dehumidifier. The drain bucket must be installed properly and
securely seated for the dehumidifier to operate.
5. The machine will restart when the drain bucket is restored in its
correct position. If the unit was turned off prior to the removal of the
drain bucket, press the Power button to restore operation.
Fig. 3
Fig. 4
Loading ...
Loading ...
Loading ...