Loading ...
Loading ...
Loading ...
en Operating the appliance
18
1. Pull out the detergent drawer.Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programs with prewash or when the
Ready in time is selected.
Start the programme
Press the A button. The indicator lamp
lights up and the program starts.
The display panel shows the Ready in
time while the program is running or the
program duration and the program
progress symbols once the wash cycle
has started.
Display panel ~ Page 10
Note: Foam detection
If the Å symbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Add less detergent to the next wash
cycle with the same load.
If you want to lock the program to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Childlock
(E 3 sec., E 3 δευτ.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock once the
programme has started.
To activate/deactivate, press and hold
the Spin speed and Finished in-time
buttons at the same time for approx.
3 seconds. The E symbol will appear
on the display panel.
■ E lit up: The childproof lock is
active.
■ E flashing: The childproof lock is
active and the programme selector
has been adjusted. To deactivate the
childproof lock, reset the
programme selector to the initial
programme. The symbol will light up
again.
Note: Do not turn the program
selector beyond the "off" position,
otherwise the programme will stop.
Note: The childproof lock remains
active after the appliance is switched
off. You must deactivate the childproof
lock whenever you want to start a new
programme.
Adding laundry
Once the programme has been started,
you can add more laundry or remove
laundry as required.
Press the A button to do this.
The A button indicator light will flash
and the machine will check whether it is
possible to add more laundry.
If
■ the è symbol goes out on the
display panel, it is possible to add
more laundry.
Loading ...
Loading ...
Loading ...