Loading ...
Loading ...
Loading ...
Connecting Ice Maker To Water Supply (cont’d):
Drain-pipe Connection (Drain hose not provided)
If you choose direct drainage or force drainage mode,
you need to purchase an external drain pipe available
at your local hardware store. The connection
instructions are below: Connect one side of the
external drain pipe linked to the outlet pipe of the ice
maker; put the other side into the drain hole. (See Fig
B.)
A - Is a pump-assisted drain
B - Is a gravity-fed continuous drain
NOTE: When using pump-assisted drain “A”,
the switch (on back) must be turned
to the “ON” position.
This appliance has the capability of the door opening from either the left or the right side. The unit is delivered to you
with the door opening from the left side. Should you desire to reverse the opening direction, please follow these
instructions.
1. Remove 2 screws (1), then pull door (4) in direction of arrow.
2. Remove 3 screws of right upper hinge (5), then remove right upper hinge. (See Fig. C.)
3. Use the screws which you removed from the right side hinges to fix the left upper and bottom hinges (8).
(See Fig. D & Fig. E.)
4. Rotate the door 180°, then assemble the door on the opposite side in the same way it was removed.
5
Loading ...
Loading ...
Loading ...