Loading ...
Loading ...
Loading ...
Special features of your oven control.
(on some models)
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous 6
second beep may be canceled.
To cancel the 6 second beep:
Press the
BAKE
and
BROIL HI/LO
pads at
the same time for 3 seconds until the
display shows
SF.
Press the
KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continuous beep). Press the
KITCHEN
TIMER ON/OFF
pad again. The display
shows
BEEP.
(This cancels the one beep
every 6 seconds.)
Press the
START
pad.
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Press the
BAKE
and
BROIL HI/LO
pads at
the same time for 3 seconds until the
display shows
SF.
Press the
CLOCK
pad once. The display
will show
12 hr.
If this is the choice you
want, press the
START
pad.
Press the
CLOCK
pad again to change to
the 24 hour military time clock. The
display will show
24 hr.
If this is the
choice you want, press the
START
pad.
Press the
CLOCK
pad again to black-out
the clock display. The display will show
OFF.
If this is the choice you want, press
the
START
pad.
NOTE: If the clock is in the black-out mode you will
not be able to use the Delay Start function.
+
+
Appearance may vary.
Appearance may vary.
Operating Instructions
Safety InstructionsInstallation InstructionsTroubleshooting TipsConsumer Support
14
Changing the Speed of the Increase or Decrease Pads
(on some models)
As you use the INCREASE or DECREASE pads when
setting a time or temperature, you may notice the
display changes slowly. This special feature allows
you to change the speed.
To set the speed you prefer, follow the steps
below.
Press the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Press the
INCREASE
pad. The display
will show you a set speed between
1 and 5.
Press the
INCREASE
pad to increase the
speed up to the number 5.
Press the
DECREASE
pad to decrease
the speed down to the number 1.
Press
START
to activate the setting and
leave the control set in this special
features mode.
+
or
Loading ...
Loading ...
Loading ...