Loading ...
Loading ...
Loading ...
35
ERRORS – WHAT TO DO?
Disturbances from the environment (e.g. the power grid) may result in various error reports (see
Troubleshooting table). In such case:
• Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying program.
• If the error persists, call an authorized service unit.
• You will be able to solve most of the problems in dryer operation by yourself (see troubleshooting table
below).
• Repairs may only be carried out by an adequately trained person.
• Repair or any warranty claim resulting from incorrect connection or use of the dryer shall not be covered by
the warranty. In such cases, the costs of repair shall be charged to the user.
The warranty does not cover the errors or failures resulting from disturbances from the environment
(lightning strike, power grid failures, natural disasters etc.).
Problem/error Cause What to do?
The machine will
not start.
• The main switch is not
switched on.
• Check whether the main switch is on.
• There is no voltage in the
power outlet.
• Check the fuse.
• Check if the power cord plug is correctly inserted
into the power outlet.
There is voltage in
the outlet, but the
drum does not spin
...
The dryer does not
work.
• Program was not started
in accordance with the
instructions.
• Re-read the instructions for use again.
• Open the door. • Check if the door is closed properly.
• Condensate tank is full (only
applies to condenser dryers
and dryers with a heat pump).
• Empty the condensate tank (see chapter
"CLEANING AND MAINTENANCE") (only applies
to condenser dryers and dryers with a heat pump).
• Perhaps the Delayed Start
option was selected.
• To cancel the Delayed Start option, press 5 the
Skip button.
The machine
stops operating
completely during a
program.
• The net filter may be clogged.
As a result, the temperature in
the dryer rises, which in turn
causes overheating, and the
dryer switches off.
• Clean the net filter (see chapter "CLEANING AND
MAINTENANCE").
• Wait for the machine to cool down, and try running
it again. If the dryer still fails to start, call a service
technician.
Laundry not dried
or drying takes too
long.
• Filters are not clean. • Clean the filters (see chapter "CLEANING AND
MAINTENANCE").
• Dryer is placed in a closed
room; room that is too cold; or
room that is too small and the
air overheats as a result.
• Make sure there is adequate supply of fresh air
to the dryer; for example, open the door and/or
window.
• Check if the temperature in the room where the
dryer is installed is too high or too low.
• Laundry was not sufficiently
wrung or spun.
• Laundry inserted into the dryer was not sufficiently
wrung or spun, or an inappropriate drying program
was selected.
• Amount of laundry dried in
the appliance is too large or
insufficient.
• Use a suitable program or extra functions.
• Laundry (such as bedding)
gets tangled.
• Close the buttons or zippers on the laundry before
drying. Select a suitable program (e.g. the bedding
program).
• After the drying process, loosen the laundry and
select an additional drying program (e.g. timed
drying program).
Loading ...
Loading ...
Loading ...