CHRYSLER 2009 300 User Manual

Loading ...

2. Release both buttons at the same time.

3. Test the feature while outside of the vehicle by press-

ing the LOCK/UNLOCK buttons on the RKE transmitter

with the ignition switch in the LOCK position and the

key removed.

4. Repeat these steps if you want to return this feature to

its previous setting.

NOTE: Pressing the LOCK button on the RKE transmit-

ter while you are inside the vehicle will activate the

security alarm. Opening a door with the Vehicle Security

Alarm activated will cause the alarm to sound. Press the

UNLOCK button to deactivate the security alarm.

Flash Lights with Remote Key Lock

This feature will cause the turn signal lights to flash when

the doors are locked or unlocked with the RKE transmit-

ter. This feature can be turned on or turned off. To change

the current setting, proceed as follows:

•

For vehicles equipped with the EVIC, refer to “Flash

Lights with Remote Key Lock,” under ⬙Personal Set-

tings (Customer-Programmable Features)” under

“Electronic Vehicle Information Center (EVIC) – If

Equipped” in Section 4.

•

For vehicles not equipped with the EVIC, perform the

following procedure:

1. Press and hold the UNLOCK button on a programmed

RKE transmitter for at least four seconds, but no longer

than 10 seconds. Then, press and hold the LOCK button

while still holding the UNLOCK button.