Loading ...
Loading ...
Loading ...
GB7
MAINTENANCE
WARNING:
- Use protective gloves.
- Disconnect the appliance from the power supply
GREASE FILTERS
The metal grease lter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low temperature and
with a short cycle. Cleaning in a dishwasher may cause discolouring of the grease lter, but its ltering eciency is unaected.
Pull out the handle to remove the lter.
Wash the lter and leave it to dry, proceeding in reverse order to ret it.
REPLACING HALOGEN LAMPS
1. Disconnect the hood from the household power supply.
2. Use a small screwdriver to gently prise (near the three points indicated) the lamp cover o.
3. Remove the burnt-out lamp and t a new one.
Lamp
Power
(W)
Socket
Voltage
(V)
Dimension
(mm)
ILCOS D Code
(according IEC 61231)
10 G4 12
10 (Diameter)
22( Light Center
Length)
HSGST/C/UB-10-
12-G4-10/22
4. Ret (snap-on) the lamp cover.
ACTIVE CARBON FILTER (lter hoods only):
The carbon lter must be cleaned once a month in a dishwasher at the highest temperature, using a normal
dishwasher detergent. It is advisable to clean the lter separately.
After cleaning, reactivate the carbon lter by drying it in the oven at 100°C for 10 minutes.
Change the carbon lter every 3 years.
Fitting the carbon lter:
1. Remove the grease lter.
2. Hook the carbon lter rstly to the metal tab at the back on the hood and then x it at the front with the two
knobs.
3. Ret the grease lter.
Loading ...
Loading ...
Loading ...