Loading ...
Loading ...
Loading ...
Connecting18
Connecting
2
4. Use
W/S
to select the [Resolution] option
then press ENTER (
b
) to move to the third level.
5. Use
W/S
to select the desired resolution then
press ENTER (
b
) to conrm your selection.
y
If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p (or 480p) as follows:
y
Press
Z
(STOP) for more than 5 seconds.
y
When you set the resolution to 576i (or 480i)
with HDMI connection, actual resolution is
outputted to 576p (or 480p).
y
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
y
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
y
The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
y
The resolution of the VIDEO OUT jack is
always outputted at 576i (or 480i) resolution.
,
Note
Antenna connection
Connect the supplied antenna for listening to the
radio.
FM
FM
OPTICAL 1 OPTICAL 2
VIDIO OUT
Rear of the unit.
y
After connecting the FM wire antenna, keep
it as horizontal as possible. Be sure to fully
extend the FM wire antenna.
,
Note
Loading ...
Loading ...
Loading ...