Loading ...
Loading ...
Loading ...
English
Close the appliance.
Fully unroll the electrical cord.
Check that the electrical installation is compatible with the wattage and
voltage stated on the bottom of the appliance.
Only plug the appliance into an earthed socket.
If it is necessary to use an electrical extension cord:
- it must have an earthed socket, and be suitably rated.
- take the necessary precautions to avoid people tripping over it.
If the power cord is damaged, it must be replaced by the manufacturer,
their after sales service centre or a person with similar electrical
qualifications in order to avoid any hazards.
Plug the electrical cord into the wall socket and switch on, the red light
comes on.
When using for the first time, a slight odour or small amount of smoke may
be given off; this is normal.
Leave the appliance to pre-heat: the green light comes on when the
correct cooking temperature is reached. During cooking, it is normal for
the green light to go on and off. Do not touch the hot surfaces of the
appliance: use the handles.
Connection, switching on and pre-heating
1
2
According to the model, you may use different sets
of plates.
• To remove the plates:
Hold the plates by the handles on each side and
press the release button.
• To replace the plates:
Place the plate at an angle with the slots below the
stops.
Press down on the plate to lock it down.
When using for the first time, wipe the plates using
kitchen paper towel moistened with cooking
oil.Remove the surplus cooking oil using clean
kitchen paper towel.
Make sure that the appliance is not hot and
unplugged before changing the plates.
Choice of plates
Loading ...
Loading ...
Loading ...