User Manual Philips 22PFL3405/12 LED TV

The USB is for TV software update only and it does not support the playback of media file.

You can rearrange the channels in the channel grid with the [Reorder] feature in the [Options] menu.

Follow these procedures to rearrange the channels:

Step 1-7
1) In TV mode, press the [OK] button on the remote control to display the channel grid.

2) If the program list is displayed, press the [Guide] button to switch to channel grid.

3) The channel grid will display all the tuned channels and a box appears around the current view channel.

4) Press the [Options] button to display the options menu.

5) Select [Reorder] and press the [OK] button.

6) Use the cursor buttons to select the channel you wish to rearrange and press the [OK] button.

NOTE: This TV does not allow you to select multiple channels and move them at the same time.

7) A directional arrow box appears around the selected channel to indicate that the channel is selected.

Step 8-13
8) Use the cursor buttons to move the channel to the desired location in the channel grid and press the [OK] button to confirm.

9) The directional arrow disappeared to confirm that the channel is rearranged to the new location.

10) Repeat step 5 and 8 if you wish to rearrange more channels.

11) Once completed, press the [Options] button.

12) Select [Done reordering] and press the [OK] button to confirm.

13) Press the [Back] button to exit the channel grid.

If you are using a direct cable connection from the wall outlet;

Check the incoming cable or antenna signal connection to ensure that it is properly secured to the TV's antenna input.
If the connection is good, perform the automatic installation again to search for all available channels.
If you are using a coaxial connection from the Cable or Satellite box to the TV;

Set the TV to the channel specified by the service provider.
Change the channels at the Cable or Satellite box to view the program.
If you are using a video connection (CVBS, S-Video, YPbPr, HDMI) from the source (DVD, Cable or Satellite box) to the TV;

You do not need to perform automatic installation to search for the channels.
Press the [Source] button on the remote control repeatedly to select the correct input source.
If you are using an HDMI connection from the source (DVD, Cable or Satellite box) to the TV;

Reset the TV and source by unplugging it from the power outlet for 30 seconds.
Turn on the TV and press the [Play] button on your source device. If the source is HDMI CEC compliant, the TV will automatically switch to the HDMI input.
If your source is not HDMI CEC compliant, turn on the TV and switch to the HDMI input.
Turn on your source.
If you are sure you have selected the correct input or channel but still have no picture or sound;

Try resetting the TV by unplugging it from the power outlet for 30 seconds.
Press the [Source] button to select the correct input source.
Check the connection cables.
Try the connected source with another TV.
Connect a different source on the same connection of your TV.