Loading ...
Loading ...
Loading ...
Operation and handling requirements
123
(6) Loosen the oil tank filler cap and remove
it, and then wipe the attached dipstick
clean.
1 Oil tank filler cap/Dipstick
(7) Screw the oil tank filler cap into the filler
hole until it stops. Remove the oil tank
filler cap again and make sure that the
engine oil level is between the minimum
and maximum level marks.
1 Dipstick
2 Maximum level mark
3 Minimum level mark
(8) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha Boat dealer. If the engine oil
level is below the minimum level mark,
slowly add engine oil.
(9) Repeat steps (6)–(8) until the engine oil is
at the proper level.
(10) Securely install the oil tank filler cap and
turn it until it stops.
(11) Repeat the checking oil level procedure
for the other engine.
(12) Close the engine hood.
Checking the engine oil (212X / 212S / 212)
WARNING
Engine oil is extremely hot immediately af-
ter the engines are turned off. Coming in
contact with or getting any engine oil on
your clothes could result in burns.
NOTICE
Make sure debris and water do not enter
the oil filler hole. Debris and water in the
engine oil can cause serious engine dam-
age.
To check the engine oil level:
(1) Place the boat in a precisely level posi-
tion on land with the engine stopped. If
the engine was running, allow the engine
oil to settle by waiting 5 minutes or more
before checking the oil level.
(2) Open the engine hood. (See page 97.)
(3) Remove the dipstick and wipe it clean.
3-star models
1 Dipstick
1
21 3
1
SportsBoat_F3R13.book Page 123 Friday, May 31, 2019 9:42 AM
Loading ...
Loading ...
Loading ...