Loading ...
Loading ...
Loading ...
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is proper-
ly in,stalledo See BAG CHANGING for
instructions,
3. Check to see that the motor safety filter is
properly installed,, See MOTOR SAFETY
FILTER CLEANING for instructions,
HOOD
It is normal for the canister hood to come off
when opened further than needed° Line up
the hinge slots, insert them, and close the
hood to replace it.
HOSE
Latch
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place_
To remove: Lift
hose latch tab
upward and pull
up on hose°
Handle
2. Insert handle into wand until lock
button snaps in place° Be sure hose is
not twisted_
To remove: Press handle release but-
ton and pull up on handieo
To store: Disconnect hose from wands
and canister to prevent stress on hose
during storage. Store hose in a loosely
coiled position so the hose covering is
not stressed.
Hose
F. Hose Cover
Latch Tab
Hood
Re_ase
DustBag
Attachment
Storage
Loading ...
Loading ...
Loading ...