Loading ...
Loading ...
Loading ...
40
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item Description
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL
ó
4:3
ó
16:9
ó
16:10
ó
NATIVE
For an HDMI
TM
signal
NORMAL
ó
4:3
ó
16:9
ó
16:10
ó
14:9
ó
NATIVE
For a video signal or component video signal
4:3
ó
16:9
ó
16:10
ó
14:9
ó
NATIVE
For an input signal from the LAN, USB TYPE A or USB TYPE B
port, or if there is no signal
CP-AX2505, CP-AX3005, CP-AX3505: 4:3 (xed)
CP-AW2505, CP-AW3005: 16:10 (xed)
• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnies picture)
ó
Large (It reduces picture)
• This item can be selected only for a video and component video
signal.
• For an HDMI
TM
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the
projector recognizes that it receives video signals.
(continued on next page)
Loading ...
Loading ...
Loading ...