Loading ...
Loading ...
Loading ...
Servicing Your Honda
150
Rear Final Gear Oil
7.
Install the oil check bolt with a new sealing washer and tighten to
the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
8.
Apply a thin coat of grease to a new O-ring, and insert it into the
oil fill cap groove.
9.
Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
10.
Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 211).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
RIGHT REAR
lower edge of oil
check inspection
hole
oil fill cap/O-ring
oil drain
plug
sealing
washer
oil check bolt
sealing washer
20 SXS1000S2R S2X-31HL66100.book 150 ページ ２０１９年５月３１日 金曜日 午後５時４２分
Loading ...
Loading ...
Loading ...