Loading ...
Loading ...
Loading ...
Kelvinator Air Conditioning Operating the air conditioner 13
Press ECO button in COOL or HEAT (if applicable) mode, the
air conditioner will automatically increase (in COOL mode) or
decrease (in HEAT mode) 1ºC per hour for 2 hours. The set
temperature will be steady for the next 5 hours then the unit
will stop.
This function saves energy and is recommended for
maintaining a comfortable sleeping temperature.
1°C
1°C
1°C
1°C
Cooling
Heating
1 hour
1 hour
1 hour
1 hour
Set temp.
Set temp.
I FEEL function
When the I FEEL function is activated, the remote control
works as a remote thermostat, providing accurate
temperature control and maximum comfort.
Point the remote control to the indoor unit and press the
I FEEL button. A beep from the indoor unit confirms that this
function is activated.
The I FEEL symbol
will stay on the display of the remote
control until I FEEL button is pressed again.
The air conditioner will operate to reach the set temperature
at the location of the remote control.
The remote control sends the temperature information at its
location to the indoor unit every ten (10) minutes.
I FEEL operation if no
temperature information is received from the remote control
for eleven (11) successive minutes.
6 Confirm the set time by pointing the remote control at
the indoor unit and pressing the
button again.
symbol will stay on the remote control display and
the function is activated.
Timer-Off
Timer-On
(On-Stop-Start operation)
This function is recommended when you want to turn the air
conditioner off after going to bed and start it again before
waking up in the morning or returning home.
Example: It is 8:00 AM and you want to stop the air
conditioner at 9:30AM and restart at 6:00PM.
2 Set the desired time by pressing repeatedly or holding
of the remote control.
3 Confirm the set time by pointing the remote control at
the indoor unit and pressing the button
again.
4 Press the button.
5. Set the desired time by pressing repeatedly or holding
of the remote control.
6 Confirm the set time by pointing the remote control at
the indoor unit and pressing the
button again.
symbol will stay on the remote control’s display and
the function is activated.
Economy (Eco) operation
Loading ...
Loading ...
Loading ...